Optoma ML1050ST ML1050ST User Manual - Page 26
Display, Select, No reverse, Left/ Right reverse, Up/ Down reverse, Up/ Down and Left/ Right reverse
View all Optoma ML1050ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use the Phase to correct it. This is a fine adjustment. Note: The Phase can be adjusted only in VGA mode. Display The Display menu allows you to modify the display settings, such as keystone, projection, auto focus, and manual focus. Display Auto Keystone On Keystone Projection Auto Focus On Manual Focus Select Exit Enter Auto Keystone: Select On to automatically adjust image distortion caused by tilting the projector. Note: The Auto Keystone function can be only used to adjust the image distortion vertically. Keystone: Adjust image distortion caused by tilting the projector (+/-40 degrees). Note: If you adjust the keystone degree manually then the Auto Keystone function will be automatically switched off. Projection: Select the projection mode, depending upon how the projector is mounted. yy Auto Keystone: On No reverse Left/ Right reverse yy Auto Keystone: Off No reverse Left/ Right reverse Up/ Down reverse Up/ Down and Left/ Right reverse Auto Focus: Select On to automatically adjust the image focus. Manual Focus: Adjust the image focus manually when Auto Focus option is off. 26 English