Optoma ML1050ST ML1050ST User Manual - Page 55
Guiding Signals, Projector, Status, Description, Power, Blue / Amber, Warning, Amber
View all Optoma ML1050ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Guiding Signals Projector Status Standby mode Power on Projector overheated Fan breakdown LED failure Description Power TEMP Warning (Blue / Amber) (Amber) LED Warning (Amber) Projector in Standby mode. Ready to Amber power on. OFF OFF Projector in Normal mode, ready to display an image. Blue OFF OFF Air vents might be blocked or ambient Amber flashing Amber OFF temperature may be above 35 ºC. and Blue ON The projector automatically shuts down. Ensure that the air vents are not blocked and that the ambient temperature is within operational range. If the problem persists, contact us. Flashing (Cycling turn-off 1sec and turn-on 3sec) One of the fans has failed. The Amber flashing Amber OFF projector automatically shuts down. If and Blue ON the problem persists, contact us. Flashing (Cycling turn-off 0.5sec and turn-on 2sec) LED shutdown. OFF OFF Amber Note: If there is a fan failure, the TEMP LED will blink amber (2 sec on / 0.5 sec off). -If the projector fan fails, the projector will automatically shut down. Reset the projector mode by pressing and holding the Power button for 10 seconds. Please wait for about 5 minutes and try to power up again. English 55