Optoma UHZ35ST Manual - Page 40
Control menu, Control device ID menu, Control remote settings menu
View all Optoma UHZ35ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
USING THE PROJECTOR Control menu Control device ID menu ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command. Note: For a full list of RS232 commands, please refer to the RS232 user manual on our website. Control remote settings menu IR Function Set the IR function setting. On: Choose "On", the projector can be operated by the remote control from the top and front IR receivers. Off: Choose "Off", the projector can't be operated by the remote control. By selecting "Off", you will be able to use the Keypad keys. User 1 / User 2 / User 3 Assign a function to the User 1, User 2, and User 3 buttons on the remote control. It allows you to use the function easily without going through the OSD menus. The available functions are HDMI 1, HDMI 2, Test Pattern, Brightness, Contrast, Sleep Timer, Color Matching, Color Temp, Gamma, Projection, Light Source Settings, Zoom, Freeze. Note: The User 1 / User 2 / User 3 function availablility depends on the remote control type. The remote control layout may vary depending on the region. Control keypad settings menu Keypad Lock When the keypad lock function is "On", the Keypad will be locked. However, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the Keypad. Control LAN menu Configure the projector's network settings. Network Status Display the network connection status. (Read only) MAC Address Display the MAC address. (Read only) DHCP Turn on DHCP to automatically acquire IP address, subnet mask, gateway, and DNS. IP Address Assign the projector's IP address. Subnet Mask Assign the projector's subnet mask. Gateway Assign the projector's gateway. DNS Assign the projector's DNS. 40 English