Optoma UHZ35ST Manual - Page 63
Warning indicators, LED lightning messages
View all Optoma UHZ35ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
ADDITIONAL INFORMATION Warning indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown: "Lamp" LED indicator is lit red and if "Power" indicator flashes red. "Temp" LED indicator is lit red and if "Power" indicator flashes red. This indicates the projector has overheated. Under normal conditions, the project can be switched back on. "Temp" LED indicator flashes red and if "Power" indicator flashes red. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator lights up or flashes, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) Power on (Warming) Power on and Lamp lighting Power off (Cooling) Error (Lamp failure) Error (Fan failure) Error (Over temp.) Power LED (Red) (Green or Blue) Steady light Flashing Flashing Flashing Flashing (0.5 sec off / 0.5 sec on) Steady light Flashing (0.5 sec off / 0.5 sec on). Back to red steady light when cooling fan turns off. Temp LED (Red) Flashing Steady light Lamp LED (Red) Steady light Power off: Power Off Press power key again. Temperature warning: Warning TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. English 63