Optoma W515 User manual - Page 33
Image advanced signal (RGB) menu, Automatic, Phase, Frequenc, H. Position
View all Optoma W515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
USING THE PROJECTOR Image advanced signal (RGB) menu IMAGE Advanced : Signal Automatic Phase Frequency H. Position V. Position On Exit Note: "Signal" is only supported in Analog VGA (RGB) signal. If "Signal" is automatic, the phase, frequency items are grayed out. If "Signal" is not automatic, the phase, frequency items will appear for the user to manually tune and are saved in the settings after that for the next time projector is turned off and on again. Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. Frequency Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. H. Position Press the Press the V. Position to move the image left. to move the image right. Press the to move the image down. Exit Press the to move the image up. Choose "Exit" to exit the menu. English 33