Optoma X330UST English Manual - Page 16
Adjusting the projector image, Image height, Zoom and focus
View all Optoma X330UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
SETUP AND INSTALLATION Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring Zoom and focus The zoom is fixed and cannot be adjusted manually. To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and legible. Focus Ring Note: The projector will focus at the following distances: XGA: 0.472m~0.675m WXGA: 0.485m~0.656m 1080P: 0.446m~0.558m 16 English
English
16
SETUP AND INSTALLATION
Adjusting the projector image
Image height
The projector is equipped with elevator feet for adjusting the image height.
1.
Locate the adjustable foot you wish to adjust on the underside of the projector.
2.
Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Zoom and focus
±
The zoom is fixed and cannot be adjusted manually.
±
To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and
legible.
Focus Ring
Note°
The projector will focus at the following distances:
±
XGA: 0.472m~0.675m
±
WXGA: 0.485m~0.656m
±
1080P: 0.446m~0.558m