Optoma X330UST English Manual - Page 47
Subnet Mask: 255.255.255.0, Press Enter.
View all Optoma X330UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
USING THE PROJECTOR 5. Click "Properties". 6. Type in the IP address and Subnet mask, then press "OK". 7. Press the "Menu" button on the projector. 8. Open on projector Network > LAN. 9. Enter the following connection parameters: ±± DHCP: Off ±± IP Address: 192.168.0.100 ±± Subnet Mask: 255.255.255.0 ±± Gateway: 192.168.0.254 ±± DNS: 192.168.0.1 10. Press "Enter" to confirm settings. 11. Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher installed. 12. In the Address bar, input the projector's IP address: 192.168.0.100. 13. Press "Enter". English 47
English
47
USING THE PROJECTOR
5.
Click “Properties”.
6.
Type in the IP address and Subnet mask, then press “OK”.
7.
Press the “Menu” button on the projector.
8.
Open on projector
Network
>
LAN
.
9.
Enter the following connection parameters:
±
DHCP: Off
±
IP Address: 192.168.0.100
±
Subnet Mask: 255.255.255.0
±
Gateway: 192.168.0.254
±
DNS: 192.168.0.1
10.
Press “Enter” to confirm settings.
11.
Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12.
In the Address bar, input the projector’s IP address: 192.168.0.100.
13.
Press “Enter”.