Optoma X330UST English Manual - Page 32
Color Space HDMI input only, Brightness Mode Lamp base data
View all Optoma X330UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
USING THE PROJECTOR Color Settings Configure the color settings. BrillianColorTM: This adjustable item utilizes a new color-processing algorithm and enhancements to enable higher brightness while providing true, more vibrant colors in picture. Color Temperature (data-mode only): Select a color temperature from Warm, Medium, or Cool. Color Matching: Select the following options: ±± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W) level of the image. ±± Saturation: Adjust a video image from black and white to fully saturated color. ±± Hue: Adjust the color balance of red and green. ±± Gain: Adjust the image brightness. ±± Reset: Return the factory default settings for color matching. ±± Exit: Exit the "Color Matching" menu. RGB Gain/Bias: This settings allows to configure the brightness (gain) and contrast (bias) of an image. ±± Reset: Return the factory default settings for RGB gain/bias. ±± Exit: Exit the "RGB Gain/Bias" menu. Color Space (non-HDMI input only): Select an appropriate color matrix type from the following: AUTO, RGB, or YUV. Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto, RGB(0-255), RGB(16-235), and YUV. White Level: Allow user to adjust White Level when inputting Video signals. Black Level: Allow user to adjust Black Level when inputting Video signals. Signal IRE: Allow user to adjust IRE value when inputting Video signals. Note: IRE is only available with NTSC video format. Adjust the signal options. Automatic: Configure automatically the signal (the frequency and phase items are grayed out). If automatic is disabled, the frequency and phase items will appear for tuning and saving the settings. Frequency: Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. H. Position: Adjust the horizontal positioning of the image. V. Position: Adjust the vertical positioning of the image. Brightness Mode (Lamp base data) Adjust the brightness mode settings for lamp-based projectors. Bright: Choose "Bright" to increase the brightness. Eco: Choose "Eco" to dim the projector lamp which will lower power consumption and extend the lamp life. Dynamic: Choose "Dynamic" to dim the lamp power which will be based on brightness level of the content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will be extended. 32 English