Optoma ZK430ST Manual - Page 45
IP Address: 192.168.0.100, Press Enter.
View all Optoma ZK430ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
USING THE PROJECTOR 5. Type in the IP address and Gateway, then select "Save". 6. Press the "Menu" button on the projector. 7. Open on projector Control > LAN. 8. Enter the following connection parameters: ± DHCP: Off ± IP Address: 192.168.0.100 ± Subnet Mask: 255.255.255.0 ± Gateway: 192.168.0.254 ± DNS: 192.168.0.51 9. Press "Enter" to confirm settings. 10. Open a web browser, for example Microsoft Edge or Chrome with Adobe Flash Player 9.0 or higher installed. 11. In the Address bar, input the projector's IP address: 192.168.0.100. 12. Press "Enter". English 45
English
45
USING THE PROJECTOR
5.
Type in the IP address and Gateway, then select “Save”.
6.
Press the “Menu” button on the projector.
7.
Open on projector
Control
>
LAN
.
8.
Enter the following connection parameters:
²
DHCP: Off
²
IP Address: 192.168.0.100
²
Subnet Mask: 255.255.255.0
²
Gateway: 192.168.0.254
²
DNS: 192.168.0.51
9.
Press “Enter” to confirm settings.
10.
Open a web browser, for example Microsoft Edge or Chrome with Adobe Flash Player 9.0 or higher
installed.
11.
In the Address bar, input the projector’s IP address: 192.168.0.100.
12.
Press “Enter”.