Optoma ZK430ST Manual - Page 62
Other problems, Remote control problems, The projector stops responding to all controls
View all Optoma ZK430ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
ADDITIONAL INFORMATION Other problems T he projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Remote control problems If the remote control does not work Check the operating angle of the remote control is pointed within ±15° to the IR receiver on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 6 m (19.7 ft) of the projector. Make sure batteries are inserted correctly. Replace batteries if they are exhausted. 62 English
English
62
ADDITIONAL INFORMATION
Other problems
The projector stops responding to all controls
±
If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before
reconnecting power.
Remote control problems
If the remote control does not work
±
Check the operating angle of the remote control is pointed within ±15° to the IR receiver on the
projector.
±
Make sure there are not any obstructions between the remote control and the projector. Move to within
6 m (19.7 ft) of the projector.
±
Make sure batteries are inserted correctly.
±
Replace batteries if they are exhausted.