Oreck Air 6 Owners Guide - Page 18
High Voltage Warning
View all Oreck Air 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
General Parts Replacement HIGH VOLTAGE WARNING - This equipment is supplied with line voltage from a standard wall socket. Use standard precautions in working on it with line voltage applied. Failure to practice normal electrical safety precautions can cause electrical shock, personal injury or property damage. 9. Unplug the red terminal (3), brown terminal (2) and black terminal (1) wires from the selector switch by pushing a paper clip (straightened) under the wire into the switch while pulling on the wire lightly. 10. Remove the white motor wire from the power supply board line neutral connection. 11. Remove the motor and replace it with the new motor. MOTOR WIRE 12. Reverse the above steps to replace the motor. 13. It is important that the motor isolators are installed correctly and are seated as designed. Contacts on side of insulator should fit over motor bearing bracket. Motor and isolators must fit securely. ISOLATOR PAD 18