Oreck ProShield Owners Guide - Page 10

Cleaning the Pre-Filter, Cleaning the Truman Collector Cell - air cleaner

Get Oreck ProShield PDF manuals and user guides View all Oreck ProShield manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

TIP r air Cleaning the Pre-Filter S for cleane The air purifier will not run if the Top Cover is not closed securely. 5 1 3 2 1. Unplug the air purifier and lay it on its side with the hinged cover on top. 2. Open the Top Cover by pressing the Cover Release button. 3. Pull the Pre-Filter straight up and out of the Cabinet. 4. Thoroughly rinse the Pre-Filter and let it air dry before placing it back in the Cabinet. Do not use heated or compressed air as part of the drying process. 5. Slide the Pre-Filter back into the unit. 6. Close the Top Cover securely. Cleaning the Truman Collector Cell Note: The Truman Cell may require more frequent cleaning if "arcing" occurs. Arcing is a sharp snapping sound that occurs when large particles are collected in the Truman Cell. If prolonged or continuous arcing occurs the Truman Cell should be cleaned. 1.Unplug the air purifier and lay it on its side with the hinged cover on top. 2.Open the Top Cover by pressing the Cover Release button. 3. Remove the collector cell by pulling up on the handle (located across the top of the Truman Cell). Lift the collector cell straight up and out. 4.Place in sink, bathtub or other location where cleaner can cover every surface. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
7
Cleaning the Pre-Filter
1.
Unplug the air purifier and lay it on its side with the hinged
cover on top.
2.
Open the Top Cover by pressing the Cover Release button.
3.
Pull the Pre-Filter straight up and out of the Cabinet.
4.
Thoroughly rinse the Pre-Filter and let it air dry before
placing it back in the Cabinet. Do not use heated or com
-
pressed air as part of the drying process.
5.
Slide the Pre-Filter back into the unit.
6.
Close the Top Cover securely.
The
air purifier
will not run if the
Top Cover is not
closed securely.
T
I
P
S
f
o
r
c
l
e
a
n
e
r
a
i
r
2
1
3
5
Cleaning the Truman Collector Cell
Note:
The Truman Cell may require more frequent cleaning
if “arcing” occurs. Arcing is a sharp snapping sound that oc
-
curs when large particles are collected in the Truman Cell. If
prolonged or continuous arcing occurs the Truman Cell should
be cleaned.
1.
Unplug the air purifier and lay it on its side with the hinged
cover on top.
2.
Open the Top Cover by pressing the Cover Release button.
3.
Remove the collector cell by pulling up on the handle
(located across the top of the Truman Cell). Lift the
collector cell straight up and out.
4.
Place in sink, bathtub or other location where cleaner can
cover every surface.