Oreck ProShield Owners Guide - Page 11

5 S for cleane Oreck's Assail-a-Cell cleaner is an excellent way to clean the collector cell. r air 3 1 7 TIP 2 5. Spray Oreck Assail-a-Cell® cleaner between each Cell Plate and cover each surface. Allow the cleaner to soak for a few minutes but do not let it dry. Thoroughly rinse the Truman Cell with clean water. An alternative method to clean the Truman Cell is to rinse or soak it in warm water for loose debris. Mild liquid dish detergent in water may also be used to help break down tough dirt and residue. Thoroughly rinse the Truman Cell with clean water. Note: To prevent damage to the components of the Truman Cell, do not put in dishwasher or use a cotton swab. Tough residue such as tar from tobacco smoke may need additional cleaning or longer soaking. 6. Shake excess water from the Truman cell to speed up drying time. Do not use heated or compressed air to dry. 7. Place the Truman Cell back into the unit by sliding it straight down into the slots. The Truman Cell is specially designed so that it can only be inserted in one direction. 8. Close the Top Cover securely. Drying the Truman Cell Note: The Truman Cell must be completely dry after cleaning in order to operate properly. A drying mode is available to help remove any residual moisture. While in this mode, the fan will be running on Medium speed, and no power will be supplied to the Truman Cell. Once the unit detects that the Truman Cell 8