Oreck XL2800H2 Owners Guide

Oreck XL2800H2 Manual

Get Oreck XL2800H2 PDF manuals and user guides View all Oreck XL2800H2 manuals
Add to My Manuals
Save this manual to your list of manuals

Oreck XL2800H2 manual content summary:

  • Oreck XL2800H2 | Owners Guide - Page 1
    S I M P LY A M A Z I N G™ USER'S GUIDE XL2800H2 HIGH SPEED UPRIGHT VACUUM CLEANER WITH ™ CLEANING SYSTEM •IMPORTANT• SAVE THIS BOOKLET! Includes: • Safety Warnings • Warranty • Operating Instructions • Trouble Diagnosis • Accessories
  • Oreck XL2800H2 | Owners Guide - Page 2
    Service, Warranty, and Accessories page 3 Assembly, To Replace Paper Filter Dust Bag . . . . page 4 Operating Instructions page 5 How to Replace a Worn Belt, To Adjust or Replace Brush page 6 Bulb Replacement, Stuffing or Blockage, Using a Fresh Air Tab page 7 Troubleshooting Guide page
  • Oreck XL2800H2 | Owners Guide - Page 3
    additional information or have problems with your ORECK appliance, you may call ORECK customer service at: In USA 1-800-989-3535 In Canada 1-888-676-7325 Please specify the model number and serial/code number which can be found on the data plate on the back of the vacuum. Save your sales or
  • Oreck XL2800H2 | Owners Guide - Page 4
    be in upright position when inserting cord assembly into loop. Insert plug on cord assembly into handle. Wrap power cord (6) around cord wrap (11) and cord wrap (13) and secure to "U" shaped part on plug. To Replace Filter Dust Bag WARNING: Unplug cord from electrical outlet before servicing. BAG
  • Oreck XL2800H2 | Owners Guide - Page 5
    brush to stop completely or slow down. See instructions in the manual for replacing belt. An extra belt is stored in the base plate of your cleaner. When buying replacement belts, use ONLY ORECK genuine belts. Belts other than ORECK belts will not operate the revolving brush correctly and may
  • Oreck XL2800H2 | Owners Guide - Page 6
    at the bottom of the housing. Replace the hold down screw. WARNING: Unplug cord from electrical outlet before servicing. To determine if the brush is worn, place a firm straight edge across the nozzle opening. If brush bristles do not extend beyond base plate, brush should be adjusted. Remove the
  • Oreck XL2800H2 | Owners Guide - Page 7
    Bulb Replacement WARNING: Unplug cord from electrical outlet before servicing. • Remove lamp housing by removing two (2) screws in the the top of the lamp housing. • Pull burned out bulb from holder and replace with new bulb. Use only Oreck replacement parts. • Replace lamp housing by replacing two
  • Oreck XL2800H2 | Owners Guide - Page 8
    . pivot clogged. Belt is broken or Replace belt. stretched. Brush is worn. Replace brush if bristles do not extend beyond base plate. Bag tube clogged. Clear obstruction. Bag pores are Change bag. clogged with fine dust. Impeller fan is broken. Return to Service Center for repair
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
HIGH SPEED UPRIGHT VACUUM
CLEANER WITH
™
CLEANING SYSTEM
SIMPLY
AMAZING
™
U
SER
’
S
G
UIDE
•IMPORTANT•
SAVE THIS BOOKLET!
Includes:
• Safety Warnings
• Warranty
• Operating Instructions
• Trouble Diagnosis
• Accessories
XL2800H2