Panasonic AG-AC160A Operating Instructions Basic - Page 18

Before using the camera, Before use

Page 18 highlights

Before use Before using the camera Always take trial shots ••When shooting important events (such as weddings), make sure to take trial shots to confirm that sound and image are being properly recorded before actual shooting. Be sure to check and set the calendar and time zone ••These settings affect the control and playback sequence of recorded contents. Check and set the calendar and time zone before shooting. (Page 33) There are no guarantees for recorded content ••In the unlikely event that content that was not recorded due to a malfunction in the camera or the memory card in use, please understand that no compensation can be provided. Copyrights ••Copyright laws forbid the use of video and audio material that you recorded for any purpose other than your own personal enjoyment. Caution regarding laser beams ••The MOS sensor may suffer damage if the lens is subjected to light from a laser beam. When using the camera-recorder in locations where laser irradiation equipment is used, be careful not to allow the laser beam to shine directly on the lens. Media that can be used with this camera ••SD/SDHC/SDXC memory cards can be used. See page 14 for details. Attaching the camera to a tripod ••The tripod hole supports 1/4-20UNC and 3/8-16UNC screws. Use it according to the fixing screw diameter of the tripod. ••The depth of the tripod hole is 5.5 mm. Do not tighten the tripod screw excessively when attaching this camera to a tripod. Attach the tripod to the tripod hole on the bottom side. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

18
Before using the camera
Always take trial shots
When shooting important events (such as weddings), make sure to take trial shots to confirm that sound
and image are being properly recorded before actual shooting.
Be sure to check and set the calendar and time zone
These settings affect the control and playback sequence of recorded contents. Check and set the
calendar and time zone before shooting. (Page 33)
There are no guarantees for recorded content
In the unlikely event that content that was not recorded due to a malfunction in the camera or the memory
card in use, please understand that no compensation can be provided.
Copyrights
Copyright laws forbid the use of video and audio material that you recorded for any purpose other than
your own personal enjoyment.
Caution regarding laser beams
The MOS sensor may suffer damage if the lens is subjected to light from a laser beam. When using the
camera-recorder in locations where laser irradiation equipment is used, be careful not to allow the laser
beam to shine directly on the lens.
Media that can be used with this camera
SD/SDHC/SDXC memory cards can be used. See page 14 for details.
Attaching the camera to a tripod
The tripod hole supports 1/4-20UNC and 3/8-16UNC screws. Use it according to the fixing screw
diameter of the tripod.
The depth of the tripod hole is 5.5 mm. Do not tighten the tripod screw excessively when attaching this
camera to a tripod.
Attach the tripod to the tripod hole on the bottom side.
Before use