Panasonic AGAC130AP Operating Instructions Advanced - Page 88
[AV OUT SETUP] screen, SIDE CROP]
View all Panasonic AGAC130AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
[AV OUT SETUP] screen Item [HDMI OUT SEL] [DOWNCON MODE] [HP MODE] [TEST TONE] [VIDEO SETUP] [AUDIO OUT] Display mode Description of settings Sets the video format of the output. [1080i/720P]: Outputs at the resolution set in [REC FORMAT]. (AVCHD [DOWN CONV]: is output at 480P. mode only) Switches down-conversion output mode. [SIDE CROP]: (AVCHD mode only) Crops the left and right edges. Images output from the external output terminals , will have portions which extend beyond the edges of the screen and cannot be seen. [LETTER BOX]: Adds black bands at the top and bottom of the image. [SQUEEZE]: Squeezes images horizontally. Selects the sound heard from the headphones. [LIVE]: The sound input from the microphone is output as is. This setting is selected when delays in the sound are annoying. [RECORDING]: The sound in the status to be recorded (the sound synchronized with the images) is output. Sets test tone output to channels 1 and 2 when BARS setting is ON. [LEVEL1]: Outputs the 1 kHz test tone. [LEVEL2]: Test tone is output at lower volume than LEVEL1. [OFF]: Does not output the test tone. Sets the setup level of video signals. [0%]: terminal output and recording setup levels will both be set to 0%. [7.5%A]: terminal output setup level will be set to 7.5%, while recording setup level will be set to 0%. Sets the audio signals to output from the terminal (A/V OUT). [CH1/CH2]: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals [CH1]: CH1 terminal = CH1 signals, CH2 terminal = CH1 signals [CH2]: CH1 terminal = CH2 signals, CH2 terminal = CH2 signals ••When a memory card containing 5.1 channel content recorded on another equipment is played back on the camera, it is down-mixed to 2 channels when output through the and headphone terminals. is the factory default mode. 88