Panasonic AGHSC1U AGHSC1U User Guide - Page 23

Before using Using grip belt Adjust the length of the grip belt so that it fits your hand, and hold it properly. 1 Flip the belt. Lens hood Rotate the lens hood counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C. A B C 2 Put your hand through the grip belt. Tripod receptacle The tripod receptacle is a hole used to mount a tripod for the unit. (For details on mounting the tripod, refer to the operating instructions for the tripod.) ≥You cannot use a tripod with a fixed tripod pin. A Rubber grip 1 Loosen the belt. 2 Put your hand through the belt as far as it goes. ≥Slip your hand through the belt as far as it goes so that your fingers will grip the rubber area firmly. 3 Replace the belt. A Camera base B Screw for mounting the unit C Tripod pin ≥You can perform operations easily using the remote control when the tripod is used. (l 24) ≥The battery cover cannot be opened when the tripod is used. Insert the battery before attaching this unit to the tripod. (l 29) ≥Tighten up the belt so that your hand remains firmly in place. 23 VQT1F36