Panasonic AGHSC1U AGHSC1U User Guide - Page 28

Setup Setup Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥Connect the battery to an AC adaptor to recharge it. The battery cannot be recharged by simply inserting it into the unit. ≥If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. ≥The Panasonic battery that can be used with this unit is VW-VBG130. Other Panasonic batteries will not work. (l 30) A ª Charging lamp Lights up: Charging Goes off: Charging completed Flashing: Make sure that the terminals of the battery or the AC adaptor are not exposed to dirt, foreign objects or dust, then reconnect them properly. Disconnect the AC cable from the AC outlet when you remove dirt, foreign objects or dust on the terminals of the battery or the AC adaptor. If the charging lamp is still flashing, something may be wrong with the battery or AC adaptor. Contact your dealer. ≥Battery charging time (l 30) ≥We recommend using Panasonic batteries (VW-VBG130). ≥If you use other batteries, we cannot guarantee the quality of this product. 1 Connect the AC cable to the AC adaptor and the AC outlet. ≥Remove the DC cable beforehand. 2 Put the battery on the battery mount by aligning the mark, and then securely plug it in. ≥The output plug of the AC cable is not completely connected to the AC adaptor jack. As shown in A, there is a gap. 28 VQT1F36