Panasonic AGHSC1U AGHSC1U User Guide - Page 34
Inserting/removing an SD
View all Panasonic AGHSC1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setup 3 Open the LCD monitor. A The status indicator A lights red and the unit is put into recording pause approx. 1.7 seconds after it is turned on. ª To cancel Quick start Press the MENU button, then select [SETUP] # [QUICK START] # [OFF] and press the cursor button. ≥The status indicator goes off, the lens cover closes and the power turns off if the mode dial is set to OFF while the unit is in quick start standby mode. ≥The status indicator goes off and the power turns off if quick start standby mode continues for approx. 5 minutes. ≥Quick start standby mode is canceled, the status indicator goes off and the power turns off in the following cases. - the mode dial is switched - the battery is removed ≥When this unit is quick-started with the white balance on automatic, it may take some time until the white balance is adjusted if the scene being recorded has a light source different from the scene last recorded. (When the MagicPix function is used, however, the white balance of the scene last recorded is retained.) ≥When this unit is quick-started, the zoom magnification becomes 1k and the picture size may differ from what it was before quick start standby mode. ≥If [POWER SAVE] (l 107) is set to [5 MINUTES] and the unit automatically goes into quick start standby mode, close the LCD monitor and then open it again. Inserting/removing an SD card Be sure to set the mode dial to OFF before inserting/removing an SD card. If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost. 1 Set the mode dial to OFF. ≥Check that the status indicator has gone off. 2 Open the LCD monitor and then open the card slot cover. 3 Insert/remove the SD card into/ from the card slot. A ≥When inserting an SD card, face the label side A upwards and press it straight in as far as it goes. ≥When removing the SD card, press the center of the SD card and then pull it straight out. 4 Securely close the card slot cover. 34 VQT1F36