Panasonic AKHC1800N AKHC1800N User Guide - Page 10
HD SDI output connector [HD SDI OUT], G/L input connector [G/L IN], Operate indicator, Cooling fan
View all Panasonic AKHC1800N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Major operating controls and their functions HD SDI output connector [HD SDI OUT] HD SDI signal output is given by this line. G/L input connector [G/L IN] For gen-lock with the camera, the external sync signal (black burst) or tri-level sync signal is supplied to this input connector. Operate indicator Green LED lamp lights to indicate that the specified DC 12 V power is supplied to the interface connector . Cooling fan • Do not block or obstruct the ventilation during operation. It may otherwise cause internal heating or fire. • The life of this fan is approximately 30,000 hours (at room temp. 77 °F (25 °C)). Replace the fan as needed. (When the room temperature is higher than 95 °F (35 °C), replace the fan 30 % earlier.) Be sure to ask the dealer for the replacement. Interface connector [I/F] Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal Gen-lock signal GND Not used Not used TX_N (EIA422)/TXD (EIA232) output RX_N (EIA422)/RXD (EIA232) input DC power supply input (+12 V) Gen-lock signal input DC GND TX_P (EIA422) output RX_P (EIA422) input GND Not used GND GND GND When supplying DC power, supply the DC +12 V voltage to pin 6 and connect GND to pin 8. - 10 -