Panasonic AKHC1800N AKHC1800N User Guide - Page 17

Configuration example 4: Controlling the camera from the AW-RP655 or AW-RP555 controller

Get Panasonic AKHC1800N - HD BOX CAMERA PDF manuals and user guides View all Panasonic AKHC1800N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

How to set up the system Configuration example 4: Controlling the camera from the AW-RP655 or AW-RP555 controller When installing the camera on the AW-PH650 outdoor pan/tilt head, refer to the operating instructions of the AW-PH650. When placing the camera on the AW-PH650 and controlling it from the AW-RP655 or AW-RP555 controller, select "4" as the PROTOCOL setting of the AK-HC1800N, and set the camera control selector switch inside the housing of the AW-PH650 to "CB400." When using G/L signals, select "DSUB" as the GEN-LOCK INPUT setting of the AK-HC1800N. Be absolutely sure to perform and check these settings prior to installation. AK-HC1800N When mounting the camera on the pan/tilt head: Select "4" as the PROTOCOL setting. Select "DSUB" as the GEN-LOCK INPUT setting. AK-HC1800N When connecting this unit directly to the controller: Select "3" as the PROTOCOL setting. Set GEN-LOCK INPUT as required. AC adapter AW-PS510AN AW-PH650 Set the camera control selector switch inside the housing to "CB400". MULTI SDI OUT POWER Outdoor pan/tilt head AW-PH650 Controller AW-RP655 or AW-RP555 RJ-45 relay adapter 10BASE-T (UTP category 5) straight cable AC adapter AW-PS510AN G/L input To be locally purchased Monitor Monitor When the AK-HC1800N, to which the motor drive lens is connected, has been directly connected to the AW-RP655 or AW-RP555 controller, zooming and focusing can be controlled using the controller's joystick. - 17 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
- 17 -
Configuration example 4: Controlling the camera from the
AW-RP655 or AW-RP555 controller
When installing the camera on the AW-PH650 outdoor pan/tilt head, refer to the operating instructions
of the AW-PH650.
When placing the camera on the AW-PH650 and controlling it from the AW-RP655 or AW-RP555
controller, select “²” as the PROTOCOL setting of the AK-HC1800N, and set the camera control
selector switch inside the housing of the AW-PH650 to “CB²00.”
When using G/L signals, select “DSUB” as the GEN-LOCK INPUT setting of the AK-HC1800N.
Be absolutely sure to perform and check these settings prior to installation.
To be locally
purchased
Controller
AW-RP655 or
AW-RP555
Monitor
POWER
SDI
OUT
RJ-45 relay adapter
10BASE-T (UTP
category 5) straight
cable
MULTI
AC adapter
AW-PS510AN
G/L input
Outdoor
pan/tilt
head
AW-PH650
Monitor
AK-HC1800N
When mounting the camera on the pan/tilt head:
Select “4” as the PROTOCOL setting.
Select “DSUB” as the GEN-LOCK INPUT setting.
AK-HC1800N
When connecting this unit
directly to the controller:
Select “3” as the PROTOCOL setting.
Set GEN-LOCK INPUT as required.
AC adapter
AW-PS510AN
AW-PH650
Set the camera control
selector switch inside the
housing to “CB400”.
When the AK-HC1800N, to which the motor drive lens is connected, has been
directly connected to the AW-RP655 or AW-RP555 controller, zooming and
focusing can be controlled using the controller’s joystick.
How to set up the system