Panasonic AW-UN70 Operating Instructions - Page 14
Removing the camera
View all Panasonic AW-UN70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Removing the camera 1 Turn off the circuit breaker and power. 2 Disconnect the cables. Disconnect the power cable, video cable, and control cable, etc. 3 Remove the main unit mounting screw used to secure the unit and mount bracket. 4 Push the unit (A). Turn it approximately 15 degrees away from the installed position (B), and remove it (C). Approx. 15° Main unit mounting screw (M3 screw) (with flat washer, spring washer) Note ●● Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit. 5 Disengage the drop-prevention wire from the mount bracket. 14
14
Removing the camera
1
Turn off the circuit breaker and power.
2
Disconnect the cables.
Disconnect the power cable, video cable, and control cable, etc.
3
Remove the main unit mounting screw used to secure the unit and mount bracket.
4
Push the unit (
A
). Turn it approximately 15 degrees away from the installed position (
B
),
and remove it (
C
).
Main unit mounting
screw (M3 screw)
(with flat washer,
spring washer)
Approx.
15°
●
Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.
Note
5
Disengage the drop‑prevention wire from the mount bracket.