Panasonic AW-UN70 Operating Instructions - Page 54
continued, AC adaptor
View all Panasonic AW-UN70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Specifications (continued) [SD card recording] MPEG-4 AVC file standard compliant (.MP4) Video compression format: MPEG-4 AVC/H.264 High Profile Audio compression format: AAC-LC (48 kHz, 16 bit, 2 ch, 128 kbps) Recording format / Bit rate System frequency System frequency 59.94 Hz 50 Hz Bit rate 3840×2160/29.97p 3840×2160/25p Up to 72 Mbps 1920×1080/59.94p 1920×1080/50p Up to 28 Mbps Average 15 Mbps 1920×1080/29.97p 1920×1080/25p Average 10 Mbps Average 6 Mbps 1280×720/59.94p 1280×720/50p Average 15 Mbps Average 8 Mbps 1280×720/29.97p 1280×720/25p Average 4 Mbps Average 2 Mbps Average 1 Mbps ■■AC adaptor Input: AC 100 V to 240 V, 1.2 A, 50/60 Hz Output: DC 12 V, 3.0 A, 36 W indicates safety information. Mass: Approx. 220 g (0.485 lb) Dimensions (W × H × D): 115 mm × 37 mm × 57 mm (4-17/32 inches × 1-59/128 inches × 2-31/128 inches) The symbols on this product (including the accessories) represent the following: AC DC Class II equipment (The construction of the product is double-insulated.) [Network] Transfer modes: Image JPEG H.264 Resolution 1920×1080 1280×720 640×360 320×180 3840×2160 1920×1080 1280×720 640×360 320×180 Frame rate*1 System frequency 59.94 Hz System frequency 50 Hz 30fps 15fps 5fps 25fps 12.5fps 5fps 60fps*2 30fps 15fps 5fps 50fps*2 25fps 12.5fps 5fps *1: The frame rate may be lower than the setting depending on the operating conditions. *2: When the image resolution is "3840×2160", "640×360" or "320×180", 60fps or 50fps cannot be selected for the frame rate. Supported protocol: IPv4 TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, DHCP, DNS, NTP, IGMP, UPnP, ICMP, ARP, RTSPoverTCP, RTSPoverHTTP, SSL(TLS), MultiCast/UniCast IPv6 TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, DHCPv6, DNS, NTP, ICMPv6(MLD), RTSPoverTCP, RTSPoverHTTP, SSL(TLS), MultiCast/UniCast i-OS, Android support: JPEG image display Inrush current, measured according to European standard EN55103-1, on initial switch-on: 4.5 A, after a supply interruption of 5 s: 16 A 54