Panasonic AW-UN70 Operating Instructions - Page 44
FOCUS buttons [F] [N], OPT buttons [ON] [OFF]
View all Panasonic AW-UN70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Parts and their functions (continued) iPRESET/LIMIT button This is used to register the settings in the preset memories or set or release the limiters. When a preset memory call button is pressed while the PRESET/LIMIT button is held down, the information on the unit's current direction and other settings is registered in the call button. Preset memory call buttons [1] to [12] correspond to the unit's No.1 to No.12 preset memories. Furthermore, the pan and tilt movement range limits (limiters) are set and released by operating the PRESET/ LIMIT button, MENU button and the pan/tilt buttons and [►]). For details, refer to "Limiters" (pages 125 to 126 in the ). jPan-tilt buttons and menu operation buttons (1) These are used to change the unit's direction. The unit is tilted in the up/down direction using the [▲] and [▼] buttons and panned in the left/right direction using the [◄] and [►] buttons. The [○] button does not work during tilting and panning. When the [▲] or [▼] and [◄] or [►] buttons are pressed at the same time, the unit moves diagonally. (2) The buttons are used for menu operations when the unit displays the camera menus. Use the and [►] buttons to select the menu items. When a selected item has a sub‑menu, the sub‑menu will be displayed by pressing the [○] button. When the cursor is aligned with a particular item and the [○] button is pressed on the setting menu at the bottom hierarchical level, the setting of the selected item blinks. When the [○] button is pressed after the setting has been changed using the and [►] buttons, the setting stops blinking, and the new setting is entered. With a regular menu, the new setting is reflected immediately after it has been changed if the change was made from the setting in the blinking status, but there are some menus (Scene, Format and Initialize) where it is reflected only after the [○] button has been pressed, the blinking has stopped and the new setting has been entered. If the MENU button is pressed quickly (for less than 2 seconds) while the setting is in the blinking status, the change will be canceled, and the setting selected prior to the change will be restored. kFOCUS buttons [F] [N] These are used to adjust the lens focus manually when the manual setting is established for the lens focus. The focus is adjusted in the far using the [F] button and in the near using the [N] button. lA/FOCUS button This is used when automatically adjusting the lens focus. mM/FOCUS button This is used when manually adjusting the lens focus. The FOCUS buttons ([F] and [N]) are used when performing the actual adjustment. nOPT buttons [ON] [OFF] This is used to select the Day mode or Night mode. [ON]: Night mode [OFF]: Day mode (standard setting) oHOME button When this is pressed for 2 seconds, the unit's direction (panning or tilting) returns to the reference position. pZOOM buttons [T] [W] These are used to adjust the lens zoom. The zoom is adjusted in the wide-angle using the [W] button and in the telephoto using the [T] button. qFAST button This is used to change the movement speed at which the panning, tilting, zooming and focusing operations are performed to the high speed. When the button is tapped, the movement speed can be set to the normal high-speed operation. When the button is held down, it can be set to an even faster high-speed operation. Tap the button to return the movement speed to the normal high-speed operation. Note ●● The operating speed for panning and tilting when the preset memory settings have been called can be changed using the Preset Speed item and Preset Speed Table item of the camera menu. rSLOW button This is used to change the movement speed at which the panning, tilting, zooming and focusing operations are performed to the low speed. When the button is tapped, the movement speed can be set to the normal low-speed operation. When the button is held down, it can be set to an even slower low-speed operation. Tap the button to return the movement speed to the normal low-speed operation. sA/IRIS button This establishes the setting for adjusting the lens iris automatically in line with the light quantity. tM/IRIS button This establishes the setting for adjusting the lens iris manually. The IRIS + and IRIS - buttons are used when performing the actual adjustment. uIRIS + button This is used to adjust the lens iris in the opening direction. vIRIS - button This is used to adjust the lens iris in the closing direction. 44