Panasonic BL C131A Operating Instructions

Panasonic BL C131A - Network Camera - Pan Manual

Get Panasonic BL C131A - Network Camera - Pan PDF manuals and user guides
UPC - 037988845156
View all Panasonic BL C131A manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic BL C131A manual content summary:

  • Panasonic BL C131A | Operating Instructions - Page 1
    BL-C111A BL-C131A Operating Instructions Network Camera BL-C111A (Wired Type) Model BL-C131A (Wireless/Wired Type) Please read this document before using the product, and save this document for future reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam for customers in the
  • Panasonic BL C131A | Operating Instructions - Page 2
    your privacy. You can even activate the privacy mode while away from home. UPnP™ support When connecting the camera to a UPnP™ compatible router, the camera's network settings can be automatically configured, making setup quick and easy. For more information, see Page 71. 2 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 3
    (BL-C131A only) The BL-C131A supports wireless standards IEEE 802.11b and IEEE 802.11g, giving you the option of using the camera in either wired or wireless mode. When used in wireless mode, up to 152-bit encryption ensures that access to the camera is secure. Operating Instructions 3
  • Panasonic BL C131A | Operating Instructions - Page 4
    is based in part on the work of the Independent JPEG Group. Abbreviations • UPnP is the abbreviation for "Universal Plug and Play". • The Network Camera is referred to as "the camera" in this document. • The Setup CD-ROM is referred to as "the CD-ROM" in this document. 4 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 5
    Network Settings ...81 Network (IPv4) Settings 82 Proxy Server Settings ...87 Using the Camera in Wireless Mode (BL-C131A Only 88 Configuring the Camera for Wireless Connection (BL-C131A Only 89 Restarting the Camera in Wireless Mode (BL-C131A Only 93 UPnP™ Settings ...94 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 6
    and Maintenance 119 8.1 Confirming Camera Status 119 8.2 Confirming Wireless Status (BL-C131A Only 120 8.3 Confirming Session Status 121 8.4 Confirming Alarm Logs 122 8.5 Restarting the Camera 123 8.6 Updating the Camera Firmware 124 8.7 Saving Settings in a Configuration
  • Panasonic BL C131A | Operating Instructions - Page 7
    the following information to access the camera. • The camera's IP address (e.g., 192.168.0.253) or URL (e.g., bob.viewnetcam.com) • The port number of the camera, if it is not 80. • The user name and password required to access the camera, which were set during camera setup. 1. Start your PC's web
  • Panasonic BL C131A | Operating Instructions - Page 8
    URLs for Panasonic Network Camera support sites on the Internet (see Page 129) I. To log in to the camera as the administrator or as a general user (see Page 109) J. Click the desired display language K. Displays the camera's model number L. Displays the camera's firmware version number M. Displays
  • Panasonic BL C131A | Operating Instructions - Page 9
    • ActiveX® Controls must be installed in order to view MPEG-4 images, MJPEG images, or to use audio features. If the appropriate ActiveX Control is not installed, the camera will prompt you to install them. For more information see Page 11 or Page 12 depending on which operating system you are using
  • Panasonic BL C131A | Operating Instructions - Page 10
    camera in wireless mode, camera images will stop refreshing if there is a disturbance in the wireless signal. If you experience difficulty when accessing the camera in wireless mode, refer to the 1.4 Wireless Connection Issues (BL-C131A Only) in the Troubleshooting Guide. 10 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 11
    be installed, download them from the Panasonic Network Camera website (http://panasonic.co.jp/pcc/products/en/netwkcam/). 1. When the ActiveX Control message is displayed in Internet Explorer®, click the message and select [Install ActiveX Control...]. 2. Click [Install]. Operating Instructions 11
  • Panasonic BL C131A | Operating Instructions - Page 12
    you need to install ActiveX Controls, you can download them from the Panasonic Network Camera support site (http://panasonic.co.jp/pcc/products/en/netwkcam) or install them using the CD-ROM included with your camera. 1. After downloading the ActiveX Controls installer or inserting the CD-ROM in your
  • Panasonic BL C131A | Operating Instructions - Page 13
    or your network uses a firewall for security purposes, the firewall may prevent video images from being displayed. In this case, you can use the [Refresh Rate] selector to select to view still images. If you want to view video images, consult your network administrator. Operating Instructions 13
  • Panasonic BL C131A | Operating Instructions - Page 14
    is turned on, however, the current settings are saved when registering a preset (see Page 22) are those settings are used when viewing a preset. The camera lens moves to the home position when it is turned on. You can change the home position if necessary (see Page 22). 14 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 15
    from the center position. If the [Pan/Tilt Range] button was used to limit the maximum pan and tilt range of the camera (see Page 17), the lens can only be moved to the maximum pan or tilt range allowed. 1. Pan: -50 ° to button to move the lens to the home position. Operating Instructions 15
  • Panasonic BL C131A | Operating Instructions - Page 16
    1.2.2 Aiming the Camera Lens • The camera lens moves to the home position when it is turned on. You can change the home position if necessary (see Page 22 navigation button. This feature can be disabled for general users (see Page 104) and for guest users (see Page 107). 16 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 17
    point you want to allow to be seen, then click . 5. Aim the camera to the lowermost point you want to allow to be seen, then click . 6. Click [Save]. Note • You can aim the camera by clicking on the desired navigation button, or by using the click to center feature. Operating Instructions 17
  • Panasonic BL C131A | Operating Instructions - Page 18
    light (4000 K) - [Fluorescent (Daylight)]: Daylight type fluorescent light (4800 K) - [Outdoor]: Solar light (6000 K) - [Hold]: Maintains the current white balance setting Note • The current white balance setting is saved when you register a preset (see Page 22). 18 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 19
    in the operation bar, you can select whether video images ([MPEG-4] or [MJPEG]) are displayed, or still images that are refreshed periodically (3 seconds, 5 seconds, etc.) are displayed. You can change the default setting for [Refresh Rate] that is used each time the single camera page is accessed
  • Panasonic BL C131A | Operating Instructions - Page 20
    • Zooming is not available for MPEG-4 images. Zooming is not available when viewing camera images on a mobile phone. buttons, etc.) even when zooming. The digital zoom uses the ActiveX Controls installed on your PC; the lens itself does not zoom. This means that while 2 20 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 21
    Taking Snapshots 1.2.7 Taking Snapshots You can take snapshots while viewing camera images and save them on your PC. 1. Click the snapshot button ( ). • The camera image opens in a new window. 2. Right-click the image (see Page 104) and for guest users (see Page 107). Operating Instructions 21
  • Panasonic BL C131A | Operating Instructions - Page 22
    that the lens moves to when you turn the camera on or click the center navigator button) • Sensor position • Presets 1-8 Additionally, the first 4 presets are set by default. • 1: Upper Left • 2: Upper Right cancel. • When [Success!] is displayed, click [Back] to continue. 22 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 23
    camera, you can monitor the audio from the camera By default the reset to the center position and the mute will be turned off (i.e., audio will be heard again). If you experience difficulty when using audio features, refer to 1.10 Audio Issues in the Troubleshooting Guide. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 24
    Viewing Multiple Camera Images 1.3 Viewing Multiple Camera Images You can register other Panasonic Network Cameras to this camera (see Page 113) and use the multi camera page to view images from multiple cameras. After you have registered the other cameras to this camera (up to 16 cameras can be
  • Panasonic BL C131A | Operating Instructions - Page 25
    ). • When configuring cameras for the multi camera page, make sure that the cameras you want to access from the Internet have been registered to this camera using their global IP addresses. For Internet access, local IP addresses (such as 192.168.xxx.xxx) cannot be used. Operating Instructions 25
  • Panasonic BL C131A | Operating Instructions - Page 26
    where the camera is installed. - Buffer images all day on weekends using the camera's motion camera is triggered. Buffering or transferring begins. B Buffering or transferring ends. Follow the procedures in this section to configure the camera to buffer or transfer images. 26 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 27
    2.1 Configuring a Timer Trigger 2.1 Configuring a Timer Trigger 1. Click the [Setup] tab. 2. On the left side of the screen under [Buffer/Transfer], click [Trigger]. 3. Click a trigger number (1-5). Operating Instructions 27
  • Panasonic BL C131A | Operating Instructions - Page 28
    images to a mobile phone's E-mail address, set the image resolution to 192 ´ 144, and set the image quality to [Favor Motion]. 9. Under [Image Buffer Frequency], select the desired buffer or transfer rate. 10. Under [Transfer Method], select the desired transfer method. 28 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 29
    sure the camera's date and time setting is correct (see Page 95). When selecting the buffer or transfer rate, keep in mind that the actual rate may be slower depending on network conditions, the number of people accessing the camera, and the type of objects being viewed. Operating Instructions 29
  • Panasonic BL C131A | Operating Instructions - Page 30
    2.2 Configuring a Sensor or Motion Detection Trigger 2.2 Configuring a Sensor or Motion Detection Trigger 1. Click the [Setup] tab. 2. On the left side of the screen under [Buffer/Transfer], click [Trigger]. 3. Click a trigger number (1-5). 30 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 31
    and tilting the camera lens, i.e., moving the camera lens will not MPEG-4] is selected as the image format. • When configuring the trigger to transfer images to a mobile phone's E-mail address, set the image resolution to 192 ´ 144, and set the image quality to [Favor Motion]. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 32
    be triggered. The camera is buffering or transferring images and cannot be triggered during this time. Deactivation time; the camera cannot be triggered. A B C A The camera is triggered. Buffering or transferring begins. No new images will be buffered or transferred. 32 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 33
    . The camera can buffer or transfer images again. 12. Under [Transfer Method], select the desired transfer method. • MPEG-4 images Mail]: After the camera is triggered, it sends images to the specified E-mail address. - [HTTP]: After the camera is triggered, it see Page 48. Operating Instructions 33
  • Panasonic BL C131A | Operating Instructions - Page 34
    sure the camera's date and time setting is correct (see Page 95). When selecting the buffer or transfer rate, keep in mind that the actual rate may be slower depending on network conditions, the number of people accessing the camera, and the type of objects being viewed. 34 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 35
    disabled, a trigger will not buffer images, transfer images, or send trigger notification. 1. Click the [Setup] tab. 2. On the left side of the screen under [Buffer/Transfer], click [Trigger]. 3. buffered images for the selected trigger are deleted when you click [Save]. Operating Instructions 35
  • Panasonic BL C131A | Operating Instructions - Page 36
    Transfer Images When configuring the camera's timer, sensor, or motion detection triggers, you can set the camera to transfer the captured images by FTP (see Page 37), E-mail (see Page 39), or HTTP (see Page 42). Once images are successfully transferred, they are deleted. 36 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 37
    procedure below to configure the camera to transfer images to an FTP site. Ask the FTP server administrator for the appropriate settings. 1. Enter the IP address or host name*1 of the FTP server. • An IPv6 address can be entered. 2. Enter the port number used by the server. (Port 21 is normally used
  • Panasonic BL C131A | Operating Instructions - Page 38
    selected to send notification when the camera is triggered, click [Next]. • The appropriate notification settings page is displayed. - For E-mail notification, see Page 45. - For HTTP notification, see Page 48. *1 [Space and [>] cannot be entered. *2 ["] cannot be entered. 38 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 39
    transfer images by E-mail while configuring a timer, sensor, or motion detection trigger (see Page 27 or Page 30). Follow the procedure below to configure the camera to Operating Instructions 39
  • Panasonic BL C131A | Operating Instructions - Page 40
    2.4.2 Transferring Images by E-mail send images to an E-mail address. Ask your Internet Service Provider (ISP) or network administrator for the appropriate settings. 40 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 41
    IP address or the host name*1 of the POP3 server (incoming mail server). • An IPv6 address can be entered. b. Enter the port number used by the server. (Port . 63 characters). b. Enter the password*2 required to access the server (max. 63 characters). • The camera supports LOGIN, PLAIN, and CRAM-MD5
  • Panasonic BL C131A | Operating Instructions - Page 42
    camera to transfer images to an HTTP site. Ask the HTTP server administrator for the appropriate settings. Note • If your computer network address can be entered. 2. Enter the login ID*1 (user name) required to access the server (max. 63 characters). 3. Enter the password camera the camera, camera
  • Panasonic BL C131A | Operating Instructions - Page 43
    when you click [Save]. b. If you selected to send notification when the camera is triggered, continue from the appropriate page. - For E-mail notification, see Page 45. - For HTTP notification, see Page 48. *1 ["] cannot be entered. *2 [Space and [>] cannot be entered. Operating Instructions 43
  • Panasonic BL C131A | Operating Instructions - Page 44
    the camera to send notifications via E-mail (see Page 45) or HTTP (see Page 48) when the camera is triggered. Note • Notifications cannot be sent when buffering or transferring images by timer. You can also send a log of trigger notifications once a day (see Page 59). 44 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 45
    by E-mail 2.5.1 Sending Trigger Notifications by E-mail The following screen is displayed while configuring the camera to buffer or transfer images by sensor or by motion detection (see Page 30) if you select [Send E-mail Notification]. Follow the procedure below to send Operating Instructions 45
  • Panasonic BL C131A | Operating Instructions - Page 46
    via E-mail. Ask your Internet Service Provider (ISP) or network administrator for the appropriate settings. 1. Under [E-mail Notification When Triggered], enter the IP address or the host name*1 of the SMTP server (outgoing mail server). • An IPv6 address can be entered. 46 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 47
    characters). • The camera supports LOGIN, PLAIN, and CRAM-MD5 authentication. 8. Click [Save], then click [Go to Trigger page]. • All buffered images for the selected trigger are deleted when you click [Save]. *1 [Space and [>] cannot be entered. *2 ["] cannot be entered. Operating Instructions 47
  • Panasonic BL C131A | Operating Instructions - Page 48
    camera network uses a proxy server, the appropriate proxy server settings must be made on the [Network address can be entered. 2. Enter the login ID*1 (user name) required to access the server (max. 63 characters). 3. Enter the password camera file uploaded by the camera, i.e., only 1 file the camera to
  • Panasonic BL C131A | Operating Instructions - Page 49
    2.5.2 Sending Trigger Notifications by HTTP • All buffered images for the selected trigger are deleted when you click [Save]. *1 ["] cannot be entered. *2 [Space and [>] cannot be entered. Operating Instructions 49
  • Panasonic BL C131A | Operating Instructions - Page 50
    on buffered images according to the [Overlay Setting] (see Page 110). See Page 9 for an example of a camera image overlays. 1. Timer 2. Sensor 3. Motion Detection 4. Timer 5. Timer 2. Click the trigger title corresponding to buffered images you want to view. 50 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 51
    buffered MPEG-4 videos A B xxRECAPTURE 2.6 Viewing Buffered Images C D A. Start and end date and time when the image was buffered B. Camera image C. Playback controls (refer to the Windows Media® Player help file for details) D. Click to save the video to your PC Operating Instructions 51
  • Panasonic BL C131A | Operating Instructions - Page 52
    using the Network Camera Viewer program, which you can download from the Panasonic Network Camera website (http:// panasonic.co.jp/pcc/products/en/netwkcam/). You can also download a still image by right-clicking in the image area and selecting [Save Picture As...]. 52 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 53
    between the number of triggers that are configured. For example, if 5 triggers are set, each trigger can buffer about xx50 images. The camera allows up to 30 users to view live video images and buffered images simultaneously. Additional users will see a gray screen. Operating Instructions 53
  • Panasonic BL C131A | Operating Instructions - Page 54
    2.7 Deleting Buffered Images 2.7 Deleting Buffered Images You can delete all images buffered by a specific trigger. 1. Click the [Setup] tab. 2. On the left side of the screen under [Buffer/Transfer], click [Trigger]. 3. Click a trigger number (1-5). 54 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 55
    camera (see Page 123), buffered images for all triggers are deleted. The following operations also delete buffered images for all triggers. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 56
    ], click [Sensor Sensitivity]. 3. Select the desired setting. - [Low]: The sensor is less sensitive to heat variations (default). - [Middle]: The sensor is moderately sensitive to heat variations. - [High]: The sensor is more sensitive to heat variations. 4. Click [Save]. 56 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 57
    and sensitivity interact will help you adjust the motion light green area. [Sensitivity]: Determines how easily the camera detects motion. Lower sensitivity means the camera is less likely to detect motion. Higher sensitivity means the camera motion detection is triggered Operating Instructions 57
  • Panasonic BL C131A | Operating Instructions - Page 58
    object brightness, however, in some cases the camera may detect rapid brightness changes by artificial light sources (such as fluorescent lights) as motion. The camera's motion detection feature detects motion differently than the Network Camera Recorder software (sold separately). Motion may not be
  • Panasonic BL C131A | Operating Instructions - Page 59
    any events that triggered the camera. Ask your Internet Service Provider (ISP) or network administrator for the appropriate settings. 1. Click the [Setup] tab. 2. On the left side of the screen under [Buffer/Transfer], click [Alarm Log]. 3. Under [A setup of operation], select the desired setting
  • Panasonic BL C131A | Operating Instructions - Page 60
    Log Information 5. Under [Notice setup of an alarm log], enter the IP address or the host name*1 of the SMTP server (outgoing mail server). • An IPv6 address can be entered. • This feature cannot transfer images to web-based mail servers, such as Hotmail. 6. Enter the port number used by the server
  • Panasonic BL C131A | Operating Instructions - Page 61
    Log Information • The camera supports LOGIN, PLAIN, and CRAM-MD5 authentication. 11. Click [Save], then click [Go to Alarm Log page]. Note • When the settings are saved, the number of new alarm logs becomes 0. *1 [Space and [>] cannot be entered. *2 ["] cannot be entered. Operating Instructions 61
  • Panasonic BL C131A | Operating Instructions - Page 62
    that do not support password authentication are not compatible with Panasonic Network Cameras. • Certain mobile phones may not display images correctly. • Video images cannot be displayed on mobile phones. • The camera's audio features are not available with mobile phones. 62 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 63
    and /mobile, then press [OK]. Example: http mobile If the camera's port number is a port number other than 80, enter ":" and the port number after the IP address. Example: http 50001/mobile If you have registered with a DNS service, such as Viewnetcam.com (see Page 75), enter the URL instead
  • Panasonic BL C131A | Operating Instructions - Page 64
    by selecting [Alarm Log], [Buffer/Transfer], or [Privacy Mode], and then entering the user name and password when the authentication dialog is displayed. If you turn privacy mode on, camera images are not buffered even if the camera is configured to buffer images. 64 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 65
    detection) of the last 50 times the camera was triggered. Note • You must be logged in to the camera as an administrator to use this feature. 1. Access the camera with your mobile phone (see Page • MD indicates a motion detection. B • S indicates a sensor detection. C Operating Instructions 65
  • Panasonic BL C131A | Operating Instructions - Page 66
    page on your mobile phone. Note • You must be logged in to the camera as an administrator to use this feature. 1. Access the camera with your mobile phone (see Page 63). 2. Select [Buffer/Trigger]. 3. 5. Select [Control Page] when finished to return to the previous screen. 66 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 67
    same LAN (local area network, i.e., personal network) are called local IP addresses. The IP addresses in the examples above are local IP addresses. So how can you access your camera when you are away from home if other people are using the same IP address as your camera? Operating Instructions 67
  • Panasonic BL C131A | Operating Instructions - Page 68
    its global IP address, it passes it on to one of your cameras depending on which port number you entered after the global IP address. But how does your router know which camera to pass information to? Understanding port forwarding If your router supports a feature called port forwarding (sometimes
  • Panasonic BL C131A | Operating Instructions - Page 69
    called UPnP™ (Universal Plug and Play), you will have to manually configure your router for port forwarding. Refer to the operating instructions included with your router for more information. If your router does support UPnP™, your cameras and router can communicate with each other so that the
  • Panasonic BL C131A | Operating Instructions - Page 70
    may be turned off by default) or for information on setting port forwarding. 2. If your ISP has assigned you a dynamic global IP address, register with a Dynamic DNS service. We recommend using Viewnetcam.com, a Dynamic DNS service that is designed for use with Panasonic Network Cameras. (For more
  • Panasonic BL C131A | Operating Instructions - Page 71
    feature manually. See Page 73. If your router's UPnP™ feature is turned off (most routers have UPnP™ turned off by default), you need to turn it on in order to configure port forwarding automatically. Refer to the operating instructions included with your router and the Panasonic Network Camera
  • Panasonic BL C131A | Operating Instructions - Page 72
    IP address changes, you will not be able to access any of the cameras. To disable Viewnetcam.com service for this camera later, access the Viewnetcam.com website (http:// www.viewnetcam.com) and cancel your registration. Enabling [Auto Port Forwarding] using from the [UPnP] page 1. Click the [Setup
  • Panasonic BL C131A | Operating Instructions - Page 73
    1.5 Camera Access Issues in the Troubleshooting Guide. Configuring port forwarding without using UPnP™ If your router does not support UPnP™, you need to configure the router's port forwarding feature manually. 1. Click the [Setup] tab. 2. On the left side of the screen under [Basic], click [Network
  • Panasonic BL C131A | Operating Instructions - Page 74
    notifies the service of its current address. If you are interested in accessing your camera over the Internet, we recommend using a Dynamic DNS service, such as Viewnetcam.com. For more information about Viewnetcam.com, please visit http:// www.viewnetcam.com for details. 74 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 75
    see Page 76. Note • • • • If your router supports UPnP™ and you want to enable auto port forwarding as well as use Viewnetcam.com, use the procedure described in Page 71. If you have multiple cameras connected to the same network, only one of the cameras needs to be registered with Viewnetcam.com
  • Panasonic BL C131A | Operating Instructions - Page 76
    's refresh button. • When registration is complete, you can access the camera using the Viewnetcam.com URL you selected during registration. Note that you can access the camera using this URL only from a PC that is not connected to the same network (LAN) as the camera. 76 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 77
    with Viewnetcam.com, your personalized URL is displayed. This is the address you can use to access the camera over the Internet. You can also access the URL displayed next to • If the status is displayed as [Expired], restart the camera and access this page again. Operating Instructions 77
  • Panasonic BL C131A | Operating Instructions - Page 78
    ). 5. Select how often the camera notifies the Dynamic DNS service of its current address. 6. Enter the user name*2 provided by the Dynamic DNS service provider (max. 63 characters). 7. Enter the password*2 provided by the Dynamic DNS service provider (max. 63 characters). 78 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 79
    to stop the camera from notifying the Dynamic DNS service when your global IP address changes. Note that if you intend to stop using the Dynamic DNS service altogether, you may need to contact the Dynamic DNS service provider in order to cancel your subscription. 1. Click the [Setup] tab. 2. On the
  • Panasonic BL C131A | Operating Instructions - Page 80
    Access 4.3 Confirming Internet Access After configuring the camera to use a Dynamic DNS service and configuring your router for port forwarding, confirm that the camera can be accessed over the Internet. Most routers will not allow you to access a camera over the Internet using a PC connected to
  • Panasonic BL C131A | Operating Instructions - Page 81
    network settings. If you cannot access the camera after changing certain network settings, use the Setup Program to confirm the camera's IP address (see Page 143) or reconfigure the camera as explained in the Setup Guide. If your network uses the IPv6 protocol, see Page 130. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 82
    ]. • BL-C131A only: If using the camera in wireless mode, [Auto Negotiation] must be selected. 3. Click [Save]. 4. When the [New settings are saved.] message is displayed, click [Restart]. Note • • If the camera's IP address was changed as a result of changing the network settings, use the Setup
  • Panasonic BL C131A | Operating Instructions - Page 83
    • If you are connecting multiple cameras and plan on using port forwarding to allow Internet access to the cameras, assign a different port number to each camera. We recommend using port numbers in the 50000-50050 range. 3. Enter the IP address to be assigned to the camera. Operating Instructions 83
  • Panasonic BL C131A | Operating Instructions - Page 84
    . • BL-C131A only: If using the camera in wireless mode, camera is restarted. Note • • To access the camera again, use the IP address you assigned to the camera in this procedure. The current network settings can be confirmed on the [Status] page (see Page 119). 84 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 85
    Settings [DHCP] 1. Under [Network Configuration from Setup Program], select whether or not you want to allow the camera to be configured using the Setup Program on the CD-ROM. 2. Under [Internet Connection], enter the port number to be assigned to the camera. • The default port number is 80, however
  • Panasonic BL C131A | Operating Instructions - Page 86
    . Note • • If the camera's IP address was changed as a result of changing the network settings, use the Setup Program on the CD-ROM to find the camera's new IP address (see Page 143). The current network settings can be confirmed on the [Status] page (see Page 119). 86 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 87
    . 1. Click the [Setup] tab. 2. On the left side of the screen under [Basic], click [Network (IPv4)]. 3. Under [Proxy Server Settings], enter the appropriate settings to use the proxy server. • Ask your ISP or network administrator for the correct settings. 4. Click [Save]. Operating Instructions 87
  • Panasonic BL C131A | Operating Instructions - Page 88
    Camera in Wireless Mode (BL-C131A Only) The BL-C131A can be used wirelessly. In this case, there is no need to connect a LAN cable to the camera. In order to use the camera wirelessly, you must: a. Configure the camera for wired connection. Refer to the included Installation Guide and Setup Guide
  • Panasonic BL C131A | Operating Instructions - Page 89
    Wireless Connection (BL-C131A Only) Configure the camera for wireless access by configuring the corresponding camera settings to match the wireless settings of your wireless router. For more information, refer to the operating instructions included with your wireless router. Note • Encryption helps
  • Panasonic BL C131A | Operating Instructions - Page 90
    5.2.1 Configuring the Camera for Wireless Connection (BL-C131A Only) When [No encryption] is selected When [No encryption] is selected, encryption will not be used for wireless communications, and therefore wireless communication may not be secure. If you select [No encryption], click [Save] to
  • Panasonic BL C131A | Operating Instructions - Page 91
    5.2.1 Configuring the Camera for Wireless Connection (BL-C131A Only) Key Format [HEX, 10 characters, 64-bit] [HEX, 26 characters, 128-bit] [HEX, 32 characters, 152-bit] [ASCII, 5 characters, 64-bit] [ASCII, 13 characters,
  • Panasonic BL C131A | Operating Instructions - Page 92
    5.2.1 Configuring the Camera for Wireless Connection (BL-C131A Only) When [WPA2-PSK (AES)] is selected When [WPA2-PSK (AES)] is selected, the WPA2-PSK (AES) standard will be used for encryption. Refer to the settings of your wireless router, then enter the [Network Key], select the key format from
  • Panasonic BL C131A | Operating Instructions - Page 93
    turned on in wired mode, it emits radio waves for about 5 minutes. During this time, the router's wireless indicator may light or flash. If you still cannot access the camera in wireless mode, see 1.4 Wireless Connection Issues (BL-C131A Only) in the Troubleshooting Guide. Operating Instructions 93
  • Panasonic BL C131A | Operating Instructions - Page 94
    in your computer's [My Network Places] folder that will be automatically updated even if the camera's IP address changes. (Windows XP is required.) 1. Click the [Setup] tab. 2. On the left side of the screen under [Basic], click [UPnP]. 3. Under [Auto Port Forwarding], select [Enable] if you want
  • Panasonic BL C131A | Operating Instructions - Page 95
    whether you want the camera to automatically adjust its date and time for Daylight Saving Time. a. If you select to enable this feature, enter the month, day, and time when Daylight Saving Time begins. (The camera's clock moves forward one hour at the set date and time.) Operating Instructions 95
  • Panasonic BL C131A | Operating Instructions - Page 96
    the camera's time setting from fraudulent NTP server tampering, incorrect time information, etc. The camera's clock becomes less accurate over time and can be affected when the camera's temperature changes. Using the [Automatic Time Adjustment] feature is recommended. 96 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 97
    Hz. - [60 Hz]: Select this item if your AC power source operates at 60 Hz. Note • [60 Hz] is the default setting. This setting should not need to be changed. 4. Under [Return to Specified Position], select whether you want the camera to move the lens to a specific preset position after a specified
  • Panasonic BL C131A | Operating Instructions - Page 98
    muted when the camera is panning or tilting. • This feature is disabled by default. • When this feature is set to [Disable], the microphone will be enabled when the camera pans or tilts. The sound of the lens moving may be picked up by the microphone. 6. Click [Save]. 98 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 99
    port number above RTP is used for RTCP. For example, when port number 33000 is used for RTP, port number 33001 is used for RTCP. 7. Under [Multicast], check [Multicast settings screen is displayed.] to configure the camera for multicasting, otherwise click [Save] to finish. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 100
    camera page. 8. Under [Packet Availability Time], enter the desired setting. 9. Under [Multicast (IPv4)], check [Use] to enable multicasting for IPv4. If used, the following settings are also necessary. a. Enter the IP address of the multicast. b. Enter the first port number to be used for MPEG
  • Panasonic BL C131A | Operating Instructions - Page 101
    5.7 Changing Video Streaming Settings b. Enter the first port number to be used for MPEG-4 streaming. This port number must be an even number. c. Enter the port number to be used for audio streaming. This port number must be an even number. 11. Click [Save]. Operating Instructions 101
  • Panasonic BL C131A | Operating Instructions - Page 102
    controls which features each general user can access (see Page 104). Cannot configure the camera. The administrator controls which features each general user can access. Additionally, you can limit guest user access to the mobile phone page only (see Page 107). 102 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 103
    under [Account], click [Administrator]. 3. Under [Administrator Authentication], enter the user name and password, then re-enter the password for verification. • See Page 147 for a list of valid characters. Note that [Space and [:] are not available. 4. Click [Save]. Operating Instructions 103
  • Panasonic BL C131A | Operating Instructions - Page 104
    user account you want to modify, then click [Modify]. 4. Under [Input User Name and Password], enter the user name and password, then re-enter the password for verification. • See Page 147 for a list of valid characters. Note that [Space and [:] are not available. 104 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 105
    for [Video Display Time]. 6.3 General Users - [Unlimited]: The user can view video images ([MPEG-4] or [MJPEG]) from the camera without restriction. - [Not permitted]: The user can view only still images. - [10 s]-[60 the zoomed area, but the lens will not pan or tilt. Operating Instructions 105
  • Panasonic BL C131A | Operating Instructions - Page 106
    6.3 General Users Deleting a general user account 1. Click the [Setup] tab. 2. On the left side of the screen under [Account], click [General User]. 3. Under [User ID that you have selected the desired general user account to be deleted, then click [Delete]. 5. Click [OK]. 106 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 107
    users 1. Make sure you configured the camera to allow guest users to access the camera (explained above). 2. Click the [Setup] tab. 3. On the left side of the screen under [Account], click [General User]. 4. Under [User ID List], select [Guest User], then click [Modify]. Operating Instructions 107
  • Panasonic BL C131A | Operating Instructions - Page 108
    select the desired setting for [Video Display Time]. - [Unlimited]: The user can view video images ([MPEG-4] or [MJPEG]) from the camera without restriction. - [Not permitted]: The user can view only still images. - [10 s]-[60 area, but the lens will not pan or tilt. 108 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 109
    Login Tab When guest users are allowed to access the camera (see Page 107), no authentication dialog is displayed when you access the camera, and the [Login] tab is displayed on the top page. Click this tab to log in to the camera as the administrator or as a general user. Operating Instructions 109
  • Panasonic BL C131A | Operating Instructions - Page 110
    status are displayed) - Default display language - Banner settings (control whether a banner is displayed on the single camera page, and the properties of the banner) 1. Click the [Setup] tab. 2. On the left side of the screen under [Advanced], click [Image Display]. 110 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 111
    . Note that [Space and [>] are not available. 4. Under [Single Camera], select the desired default image resolution, image quality, and image refresh rate. 5. Under [Multi-Camera], select the desired default image resolution, image quality, and image refresh rate. Operating Instructions 111
  • Panasonic BL C131A | Operating Instructions - Page 112
    format, see Page 95. b. Select whether you want to display a text message in the lower left corner of camera images, then enter the desired text (max. 20 characters). • See Page 147 for a list of valid characters. [Save]. *1 Note that [Space and [>] are not available. 112 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 113
    Cameras 7.2 Registering Multiple Cameras You can register other Panasonic Network Cameras to this camera's [Multi] tab. This allows you to view images from up to 16 cameras by simply accessing this camera and clicking the [Multi] tab. Registering other cameras to this camera 1. Click the [Setup
  • Panasonic BL C131A | Operating Instructions - Page 114
    [Multi-Camera]. 3. Under [Change Camera Order], select the number of the camera you would like to move, and select the number you would like to move the camera to. • For example, to move camera number 2 to position number 1, select [From No.] 2 [To No.] 1. 4. Click [Move]. 114 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 115
    general user or guest user during a time the camera is outside of the operational time to confirm that camera images cannot be seen. • Make sure the camera's date and time setting is correct in order for this feature to function as desired. 1. Click the [Setup] tab. 2. On the left side of the screen
  • Panasonic BL C131A | Operating Instructions - Page 116
    Times In the example below, the camera is set to be disabled on Mondays (in setting No. 1) and is set to be disabled on Tuesdays (in setting No. 2). However, the camera can be accessed on both Mondays and Tuesdays because these days are each enabled by one of the settings. 116 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 117
    [Setup] tab. 2. On the left side of the screen under [Advanced], click [Indicator Control]. 3. Select the desired setting. 4. Click [Save]. Note • If the indicator lights in any color other than green, refer to 1.2 Camera Indicator Issues in the Troubleshooting Guide. Operating Instructions 117
  • Panasonic BL C131A | Operating Instructions - Page 118
    's user name and password must be entered. Turning privacy mode on You can turn privacy mode on by: - Pressing the PRIVACY button on the front of the camera (the indicator will turn from green to red). - Accessing the camera with a PC as the administrator. 1. Click the [Setup] tab. 2. On the
  • Panasonic BL C131A | Operating Instructions - Page 119
    . 2. On the left side of the screen under [Maintenance], click [Status]. 3. Confirm the desired information. Note • See the Panasonic Network Camera support site (http://panasonic.co.jp/pcc/products/en/netwkcam) for details about the information displayed on this page. Operating Instructions 119
  • Panasonic BL C131A | Operating Instructions - Page 120
    strength is 15%-49% - [Weak]: When the signal strength is 1%-14% - [No connection]: When there is no signal (0%) See the Panasonic Network Camera support site (http://panasonic.co.jp/pcc/products/en/netwkcam) for details about the information displayed on this page. 120 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 121
    on the [Session Status] page such as: - The number of active video (MPEG-4 and MJPG) and audio sessions - Multicast session status 1. Click the [Maintenance] phone access - Still image viewing - Accessing the [Top], [Setup], [Internet], [Maintenance], and [Support] pages Operating Instructions 121
  • Panasonic BL C131A | Operating Instructions - Page 122
    screen under [Maintenance], click [Alarm Log]. 3. Confirm the desired information. Note • • When the camera is restarted, the alarm log content is deleted. You can configure the camera to send a daily log by E-mail that reports the status of triggers 1-5 (see Page 59). 122 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 123
    . 2. On the left side of the screen under [Maintenance], click [Restart]. 3. Under [Scheduled Restart], click [Enable]. 4. Select the days and times you would like the camera to automatically restart. 5. Click [Save]. Operating Instructions 123
  • Panasonic BL C131A | Operating Instructions - Page 124
    when the firmware is updated. All alarm logs are deleted when the firmware is updated. You can also use the Setup Program to update the camera's firmware (see Page 143). The camera's current firmware version can be confirmed on the [Top] page and the [Status] page. 124 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 125
    names, passwords, and Setup update the camera's firmware later, the configuration file may not be able to be restored properly. If you regularly save a configuration file of the camera's settings, remember to save a configuration file after you update the camera's firmware. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 126
    Alarm logs will be deleted when you load the saved configuration file and restart the camera. If you have updated the camera's firmware, you may not be able to restore a configuration file correctly if the configuration file was saved with the old camera firmware version. 126 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 127
    the camera by referring to the [Setup Guide]. When the camera is reset, the internal clock will not be reset, but the time format will be set to AM/PM mode. Change the setting if necessary (see Page 95). See Page 149 for a list of the camera's default settings. Operating Instructions 127
  • Panasonic BL C131A | Operating Instructions - Page 128
    FACTORY DEFAULT RESET button You can also reset all of the camera's settings to their factory default settings by pressing the FACTORY DEFAULT RESET button for about one second with a pointed object. The camera must be turned on in order to reset it. FACTORY DEFAULT RESET 128 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 129
    The [Wireless Help] page (BL-C131A only) Displays basic help information regarding wireless settings. The [Product Information] page Displays a link to the Panasonic Network Camera website where you can view product information. The [Support Information] page Displays a link to the Panasonic Network
  • Panasonic BL C131A | Operating Instructions - Page 130
    DNS service You cannot access the camera by entering its IPv6 address in your web browser, therefore, you need to subscribe to an IPv6-compatible domain name service or Dynamic DNS service. We recommend using Viewnetcam.com, a Dynamic DNS service designed for use with Panasonic Network Cameras. For
  • Panasonic BL C131A | Operating Instructions - Page 131
    Router for IPv6 Refer to your Internet Service Provider and the operating instructions included with your router for information on configuring Panasonic Network Camera website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for information about the recommended routers. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 132
    If you use Windows XP Service Pack 2, the following procedure is also necessary. 1. Click [Start]®[Control Panel]®[Security Center]®[Windows Firewall]®[Advanced] tab. 2. Click the [Settings...] button under [ICMP]. 3. Check [Allow incoming router request], then click [OK]. 132 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 133
    be selected. 4. Click [Save]. 5. When the [New settings are saved.] message is displayed, click [Restart]. Note • The current network settings can be confirmed on the [Status] page (see Page 119). You can also confirm the camera's IPv6 address using the Setup Program. Operating Instructions 133
  • Panasonic BL C131A | Operating Instructions - Page 134
    at [Auto Negotiation]. • This setting is effective for both IPv4 and IPv6 connections. • BL-C131A only: If using the camera in wireless mode, [Auto Negotiation] must be selected. 7. Click [Save]. 8. When the [New settings are saved.] message is displayed, click [Restart]. 134 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 135
    10.3 Configuring Your Camera for IPv6 Note • The current network settings can be confirmed on the [Status] page (see Page 119). You can also confirm the camera's IPv6 address using the Setup Program. Operating Instructions 135
  • Panasonic BL C131A | Operating Instructions - Page 136
    or Dynamic DNS service you registered the camera to (e.g., bob.viewnetcam.com). • The port number of the camera, if it is not 80. • The user name and password required to access the camera, which were set during camera setup. 1. Start your PC's web browser. 2. In the browser's address bar, enter
  • Panasonic BL C131A | Operating Instructions - Page 137
    web browser to bypass the proxy server when accessing the camera over the LAN. Note • • Consult your Internet Service Provider or network administrator to find out if your network uses a proxy server and consult your network administrator before changing your PC's proxy server settings. The video
  • Panasonic BL C131A | Operating Instructions - Page 138
    11.1 Proxy Server Settings 3. Click the [Connections] tab, then click [LAN Settings...]. 4. If there is a check next to [Use a proxy server for your LAN], click [Advanced]. 138 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 139
    11.1 Proxy Server Settings • If there is no check next to [Use a proxy server for your LAN], click [Cancel]. You do not need to change any settings. 5. Enter the camera's IP address in the field under [Do not use proxy server for addresses beginning with:]. 6. Click [OK]. Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 140
    Creating a Shortcut to the Camera 11.2 Creating a Shortcut to the Camera If you are using Windows XP, you can create a shortcut to the camera in your computer's [My Network Places] folder that will be automatically updated even if the camera's IP address changes. In order to use this feature, you
  • Panasonic BL C131A | Operating Instructions - Page 141
    the [Temporary Internet files] Setting 11.3 Changing the [Temporary Internet files] Setting If old images are displayed when you access the camera, change the [Temporary Internet files] to the page] under [Check for newer versions of stored pages]® [OK]®[OK]®Complete Operating Instructions 141
  • Panasonic BL C131A | Operating Instructions - Page 142
    11.4 About the MPEG-4 Viewer Program 11.4 About the MPEG-4 Viewer Program The MPEG-4 viewer program is an ActiveX Control that is used to play MPEG-4 files within Internet Explorer. This software is installed automatically the first time you view MPEG-4 videos. A software license for the MPEG-4
  • Panasonic BL C131A | Operating Instructions - Page 143
    Using the Setup Program The Setup Program, found on the included CD-ROM, can be used to: - Find cameras on the LAN and confirm information (IP address, firmware version, status, etc.) as needed (see Page 143). - Configure a camera's network settings (see Page 143). - Update a camera's firmware (see
  • Panasonic BL C131A | Operating Instructions - Page 144
    double-click Setup.exe found on the CD-ROM. 3. Click [Update Firmware]. A dialog prompts you to specify the location of the firmware file. 4. Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. 5. Select the camera you would like to update, then click
  • Panasonic BL C131A | Operating Instructions - Page 145
    status. 7. xxCONFIRM SPEC 8. After the settings have been restored to the camera, the camera will restart automatically. Note • Network settings and the administrator user name and password are not changed when you restore a configuration file using the Setup Program. Operating Instructions 145
  • Panasonic BL C131A | Operating Instructions - Page 146
    hot water when cleaning the camera, as they may cause a change in the shape or color of the camera. Do not apply pressure to the lens housing (pan/tilt mechanism) of the camera. Any forced movement can touch the lens directly. Fingerprints may cause an unclear image. 146 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 147
    2 B R b r # 3 C S c s $ 4 D T d t % 5 E U e u & 6 F V f v ' 7 G W g w ( 8 H X h x ) 9 I Y i y * : J Z j z + ; K [ k { , < L \ l | - = M ] m } . > N ^ n ~ / ? O _ o 13.2 ASCII Character Table Operating Instructions 147
  • Panasonic BL C131A | Operating Instructions - Page 148
    Internal Memory Specifications for Buffered Images The camera's internal memory can buffer images according to 250 5 KB 800 Favor Motion 20 KB 200 8 KB 500 3 KB 1330 MPEG-4 videos Resolution Specification Snapshot 640 ´ 480 320 ´ 240 192 ´ 144 File Size xxOLD SPEC 148 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 149
    Max. Bandwidth Usage (Mbps) Unlimited Connection Type Auto Negotiation Wireless (BL-C131A on- Communication Mode ly) Channel 802.11 b/g Auto SSID xxCONFIRM xxSpeed xxAuto Encryption No encryption UPnP™ Auto Port Forwarding Disable Display Shortcut Icon in My Net- Enable work Places
  • Panasonic BL C131A | Operating Instructions - Page 150
    2 AM Network Camera Auto 60 Hz -50 ° 0 ° +50 ° -40 ° 0 ° +10 ° Notes - - - - - - 1-15 characters - - - - Account Items Security: Administrator General Authentication General User User Name Password Retype Password User ID List User Name Password Retype Password Access Level Default Do not
  • Panasonic BL C131A | Operating Instructions - Page 151
    IP Address or Host Name Port No. Camera Name Checked - - - - Host name is 1-255 characters 20, 21, 25 and 110 are not available 1-15 characters Status Off - Trigger Timer - Active Time of Trigger Always - Transfer Method No Transfer, No Memory - Overwrite Notify - - Operation
  • Panasonic BL C131A | Operating Instructions - Page 152
    13.4 Default Setting List Preset Buttons Presets 1-20 Items Preset 1 Preset 2 Preset 3 Preset 4 Default UpperLeft UpperRight LowerLeft LowerRight Notes - - - - 152 Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 153
    mode) Auto/Manual/Hold 9 steps image quality) with time display Camera to PC ADPCM 32 kbps 300 IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, UPnP™, SMTP Authentication, RTP, RTSP, RTCP IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, RTP, RTSP, RTCP Operating Instructions
  • Panasonic BL C131A | Operating Instructions - Page 154
    : About 30 ° Vertical: About 85 ° Distance: About 5 m (16 feet 5 inches) Power Network Communication Camera Operation Ethernet Link Sensor Detection 74 mm ´ 98 mm ´ 73 mm (2 15/16 inches ´ 3 7/8 inches ´ 2 7/8 inches) BL-C111A: 180 (0.4 lb.) BL-C131A: 210 (0.46 lb.) AC adaptor: Input 120 V AC, 60 Hz
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Operating Instructions
Network Camera
BL-C111A (Wired Type)
Model
BL-C131A (Wireless/Wired Type)
BL-C111A
BL-C131A
Please read this document before using the product, and save this document for future reference.
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico