Panasonic BLPA300A BLPA300A User Guide - Page 18
Resetting an adaptor, FACTORY DEFAULT RESET
UPC - 037988845569
View all Panasonic BLPA300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Useful Information Resetting an adaptor Normally an adaptor does not need to be reset, however, you may need to reset an adaptor if: • You are concerned that another adaptor may have been accidentally registered to your master. (For example, the adaptor of someone who lives in the same apartment building as you.) • An error occurs while registering a terminal to the master. • You are registering an adaptor. Note • Resetting a terminal erases its registration to the master. It must be registered to the master again in order to be used. • If the master is reset, all terminals must be registered to the master again in order to be used. Follow the procedure below to reset an adaptor. 1. With a pointed object press the FACTORY DEFAULT RESET button on the adaptor for about 3 seconds. • All the adaptor's indicators will begin flashing. 2. Once all the adaptor's indicators stop flashing, the adaptor has been reset. • Do not unplug the adaptor for about 30 seconds. 18