Panasonic CF-50GB2UUKM Operating Instructions - Page 12

Getting Started

Page 12 highlights

Getting Started First-time Operation 4 Match the mark on the cover to the body of the computer and slide the cover back into place. Be sure the tab does not get caught when closing the cover. CAUTION If the cover is not attached properly, the battery may fall out while the computer is being carried. Mark 4 Connect your computer to a power outlet The battery pack will be charged automatically. DC-IN Jack DC IN 15.6V Charging Time: Approx. 3.5 hours (Varies depending on the usage conditions.) CAUTION Be sure the AC adaptor is connected until completing the first-time use operation. When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer. Handling the AC adaptor Do not twist or pull the AC power cord forcefully. Doing so may damage the connections. Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer. When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. 5 Open the display 1 Slide the latch located at the front. 2 Lift open the display. Power Switch Power Indicator 12 6 Turn your computer on Press the power switch and hold it for approximately one second until the power indicator turns on before releasing it. CAUTION Do not press the power switch repeatedly. Once the computer is powered off, you must wait at least ten seconds before powering it on again.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

12
Getting Started
First-time Operation
6
Turn your computer on
Press the power switch and hold it for approximately one second until the power indicator
turns on before releasing it.
Do not press the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before pow-
ering it on again.
4
Connect your computer to a power outlet
The battery pack will be charged automatically.
Charging Time: Approx. 3.5 hours
(Varies depending on the usage conditions.)
Be sure the AC adaptor is connected until completing the first-time use operation.
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully.
Doing so may damage the
connections.
Use only the specified AC adaptor with your computer.
Using an AC adaptor other
than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord from
your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and
lightning.
Since this could adversely affect your computer, an uninterruptible power
source (UPS) is highly recommended unless running from the battery pack alone.
5
Open the display
1
Slide the latch located at the front.
2
Lift open the display.
CAUTION
CAUTION
Power
Switch
Power Indicator
If the cover is not attached properly, the battery may fall out while the com-
puter is being carried.
CAUTION
4
Match the mark on the cover to the body of the computer and slide the cover back
into place. Be sure the tab does not get caught when closing the cover.
Mark
DC-IN Jack
DC IN 15.6V