Panasonic CF-50GB2UUKM Operating Instructions - Page 17
If [Enter Password] is displayed
View all Panasonic CF-50GB2UUKM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
If [Enter Password] is displayed Enter your password* and press Enter .( "Security Measures") Enter Password [ ] The correct password Will Start Three incorrect attempts or No password for about a minute * Supervisor Password or User Password set in the Setup Utility (not the Windows password). Will Not Start (Power off) When an application or file that was previously displayed appears on your screen The standby or hibernation mode has been set ( "Standby/Hibernation Func- tions"). 3 Log on to Windows Windows 2000 Wait for 10 seconds after confirming that the hard disk drive access has been completed, input the user name and password, then select [OK]. Until the correct user name and password are entered, the computer will not operate. Windows XP Wait for 10 seconds after confirming that the hard disk access has been completed, select the user and input the password, then select . Until the correct password is entered, the computer will not operate. 4 Select your application You are able to start working on your computer. NOTE The power saving function is factory set, so if there is no input from a key, the touch pad or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad or an external mouse (when one is connected) is used or a key is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press Space or Enter to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like Ctrl . In addition, when the computer is left alone, it automatically enters the standby or hiber- nation mode ( "Standby/Hibernation Functions"). The computer will resume by pressing the power switch. Windows XP When switching to a different user with the Fast User Switching function, it may not be possible to set the settings of the display. In this case, log off all users, and try the operation once more. If the problem persists, restart the computer. Operation 17