Panasonic CF-W4HCEZZBM Operating Instructions - Page 32

Setup Utility (An underline indicates the factory default settings) CD/DVD Drive Power Off • You can set the drive power to [On] or [Off] when the computer is started up. On • When set to [Off]: • From the next time you start the computer, you will be unable to start up from DVD-ROM & CD-R/RW drive. The disk cover cannot be opened until Win- dows has started. To start up from the DVD-ROM & CD-R/RW drive (give preference to [USB CDD] (internal DVD-ROM & CD-R/RW drive) in the [Boot] menu), set this to [On]. • If operations are resumed from hibernation mode while a disk is set, it may take about 20 seconds for operations to resume. • The drive power cannot be turned on/off with the drive power/open switch until Windows starts, regardless of the current on/off status. Battery Charging Indicator • Set the battery indicator to turn on or flash while the battery pack is recharging. On Continuous Flashing Getting Started Advanced Menu NOTE z The [Advanced] menu cannot be changed when the Setup Utility is started up with the User Password. (An underline indicates the factory default settings) Modem • Select whether to use the internal modem function ([Enable]) or not ([Disable]). (This does not work for the external modem.) Disable Enable LAN • Select whether to use the internal LAN function ([Enable]) or not ([Disable]). (This does not work for the external LAN card.) Disable Enable Wireless LAN • Select whether to use the internal wireless LAN function ([Enable]) or not ([Disable]). (This does not work for the external wireless LAN card.) Disable Enable Legacy USB Support • Select whether to use the function that makes the computer recognize internal DVD-ROM & CD-R/RW drive, USB keyboard and USB floppy disk ([Enable]) or not ([Disable]) before starting Windows. Disable Enable Security Menu NOTE z When the Setup Utility is started up with the User Password, only a limited number of items can be displayed and set. (Î page 29) z [SD Startup], [SD Setting Method] and [Clear registered SD card] will be displayed only when an SD memory card has been registered. z When starting up the computer, if the message [Hard disk access is prohibited "Hard Disk Lock"] appears, start up the Setup Utility, and reset the details to match the settings when [Hard Disk Lock] was set. (An underline indicates the factory default settings) Execute-Disable Bit Capability • When [Execute-Disable Bit Capability] is set to [Enable], it means that this computer supports hardware-based Data Execution Prevention (DEP). It should usually be set to [Enable]. DEP is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system. Disable Enable 32