Panasonic CF-W4HCEZZBM Operating Instructions - Page 53
Changing the drive letter
UPC - 092281861371
View all Panasonic CF-W4HCEZZBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
E The message "[Recovery] is complete" will be displayed. Remove the Product Recovery DVD-ROM, and press any key to shut down the computer. 4 Return the Setup Utility settings to their default values. Return the Setup Utility to its settings at the time of purchase to ensure proper setup of Windows. A Turn on the computer, and press the F2 key while [Panasonic] boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password, and press the Enter key. B Press the F9 key. At the confirmation message, select [Yes] and press the Enter key. C Press the F10 key. At the confirmation message, select [Yes] and press the Enter key. The Setup Utility will close, and the computer will restart. 5 Setup Windows. (Î page 18) 6 Run the Setup Utility and change the settings where neces- sary. (The Setup Utility settings will return to their default values. Even the security settings with the exception of the password(s), date and time will return to their default values.) 7 If you can connect to the Internet, perform Windows Update. (Î "To Update this Computer to its Latest Version" in onscreen Reference Manual) Changing the drive letter You can change the drive letter for the DVD-ROM & CD-R/RW drive or hard disk drive by the following steps. z The C drive cannot be changed. z DVD-ROM & CD-R/RW drive is the D drive at the time of purchase. z We recommend that you make these changes before installing applications. A Click [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools] and double-click [Computer Management]. B Click [Disk Management] on [Storage]. C Right-click the partition of the hard disk or the name of the DVD-ROM & CD-R/RW drive and click [Change Drive Letter and Paths...]. D Click [Change]. E Click [Assign the following drive letter] and select the new drive letter, and then click [OK]. F At the confirmation message, click [Yes]. 53 Troubleshooting