Panasonic CF-W4HCEZZBM Operating Instructions - Page 51

Reinstalling 1 Connect the AC adaptor. Do not interrupt the reinstallation procedure before completion, for example by turning off the computer or pressing the Ctrl + Alt + Del key, as this may prevent Windows from starting up, or may cause data to be lost so that the reinstallation procedure cannot be executed. 2 Change the settings in the Setup Utility. Make the following settings. z Return settings to the status at the time of purchase. z Change settings to enable startup from DVD-ROM & CD-R/RW drive. If you change the settings from that at the time of purchase, we recommend that you make a note of the settings that are changed. A Turn on the computer, and press the F2 key while [Panasonic] boot screen is displayed. The Setup Utility will start up. z If the password has been set, enter the Supervisor Password, and press the Enter key. B Press the F9 key. At the confirmation message, select [Yes] and press the Enter key. C Select the [Boot] menu, then select [USB CDD] and press the F6 key until [USB CDD] is at the top of [Boot priority order]. D Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW drive. z When the disk cover does not open: [CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Perform the following procedure. Press the F10 key. At the confirmation message, select [Yes] and press the Enter key. (The computer will restart) Press the F2 key while [Panasonic] boot screen is displayed. Place the Product Recovery DVD-ROM, and execute step E. E Press the F10 key. At the confirmation message, select [Yes] and press the Enter key. The Setup Utility will close, and the computer will restart. z If the password has been set, enter the Supervisor Password, and press the Enter key. 3 Use the Product Recovery DVD-ROM to execute reinstalla- tion. A Press the 1 key to execute [1. [Recovery]]. (All of the screens below are only examples.) Troubleshooting 51