Panasonic CQC5410U CQC5110U User Guide - Page 13

E N G Audio Settings L I S H 17 1 Press [VOLUME] (SEL: select). Volume Default:18 Setting range: 0 to 40 Bass/Treble You can adjust the bass and treble sound. Default: BAS (bass) 0 dB TRE (treble) 0 dB Setting range: j12 dB to i12 dB (by 2 dB) SQ Adjustment You can adjust the characteristics of the currently selected sound type (SQ). It is also possible for a maximum of 5 different adjusted SQ to be preset. Adjustable frequency: 60 Hz, 160 Hz, 400 Hz, 1 kHz, 3 kHz, 6 kHz, 16 kHz Setting range: j12 dB to i12 dB (by 2 dB) ≥ Setting of SQ, bass/treble and volume are influenced one another. If the influence mentioned above causes distortion to the audio signal, readjust bass/treble or volume. (Push.) (Example: Radio mode) Select Select Select Select (page 38) 36 CQ-C5410/5310/5210/5110U 2 Turn [VOLUME]. (Press [VOL "] or [VOL #] on the remote control unit.) [VOLUME #] [VOLUME "] [SEL] (Select) [%] [$] [BAND] POWER MENU SOURCE SEL NUMBER VOL MUTE # 123 RAND SCAN REP 456 789 6 5 0 BAND DISP SET Car Audio E N G L I S H 18 [VOL "] [VOL #] [2] to [6] (SQ preset buttons) [DISP] (Display) [VOLUME "]: Up [VOLUME #]: Down [VOLUME "]: Increased [VOLUME #]: Decreased [VOLUME "]: Increased [VOLUME #]: Decreased (SQ adjustment mode) 1 Press [$] or [%] to select a frequency. [$]: Increased [%]: Decreased 2 Turn [VOLUME "#]. [VOLUME "]: Increased [VOLUME #]: Decreased 3 Press and hold one of the buttons from [2] to [6] for more than 2 seconds. ≥ The adjusted SQ is preset in the number of the selected button, and the regular display is restored. ∫ To return an adjusted SQ to the default setting 1 Press [SQ], and select the SQ which is to be returned to the default setting. 2 Press and hold [BAND] for more than 2 seconds. Note: ≥ Press [DISP] (display) to return to the regular mode. ≥ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume setting, 10 seconds in SQ adjustment), the display returns to the regular mode. ≥ The volume can also be adjusted directly using [VOLUME] on the main unit. (page 23) Note: ≥ Only buttons [2] to [6] can be used to preset the adjusted SQ. An adjusted SQ cannot be preset in button [1]. ≥ To call a preset SQ, refer to page 25. ≥ While the SQ adjustment mode is established, only adjustments are performed, and even if the adjustment mode is exited without presetting an adjusted effect, what has been set will be reflected as the current SQ until another SQ is selected. ≥ Even when the SQ presets are adjusted, the display which appears when the settings are called remains unchanged. ≥ The SQ adjustment mode can be established also by pressing [SQ] for more than 2 seconds. CQ-C5410/5310/5210/5110U 37