Panasonic CQC5410U CQC5110U User Guide - Page 14

E N G Audio Settings (continued) L I S H 1 Press [VOLUME] 19 (SEL: select). Balance/Fader You can adjust the sound balance among the front, rear, right and left speakers. Default: BAL (balance) CNT (center) FAD (fader) CNT (center) Setting range: 15 levels each Subwoofer Level You can change the subwoofer volume level. Default: 0 dB Setting range: MUTE (subwoofer mute), j6 dB to i6 dB (by 2 dB) Subwoofer Low Pass Filter (LPF) You can select the upper limit frequency of the sound from subwoofer. Default: 80 Hz Setting range: 80 Hz/120 Hz/160 Hz High Pass Filter (HPF) Select the lower limit frequency of the sound from speakers (except subwoofer) Default: OFF Setting range: OFF/90 Hz/135 Hz/180 Hz/225 Hz (Push.) Select Select Select Select Select 38 CQ-C5410/5310/5210/5110U 2 Turn [VOLUME]. (Press [VOL "] or [VOL #] on the remote control unit.) [VOLUME #] [VOLUME "] E N G L I S H [SEL] (Select) POWER MENU SOURCE SEL 20 [VOL "] NUMBER VOL MUTE # [VOL #] 123 RAND SCAN REP 456 789 6 5 0 BAND DISP SET Car Audio [DISP] (Display) [VOLUME "]: Right enhanced [VOLUME #]: Left enhanced [VOLUME "]: Front enhanced [VOLUME #]: Rear enhanced [VOLUME "]: Increased [VOLUME #]: Decreased Note: ≥ Press [DISP] (display) to return to the regular mode. ≥ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume setting, 10 seconds in SQ adjustment), the display returns to the regular mode. ≥ When SBC-SW setting (page 23) has been selected to ON, the settings resulting from the adjustments performed at the subwoofer level and subwoofer low pass filter settings are reflected in the output. [VOLUME "]: Increased [VOLUME #]: Decreased [VOLUME "]: Increased [VOLUME #]: Decreased CQ-C5410/5310/5210/5110U 39