Panasonic CSXE9PKUA CS-XE12PKUA User Guide - Page 3

Quick guide 1 3 Inserting the batteries 2 1 Pull out the back cover of remote control 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover 2 3 Clock setting TIMER ON SET 1 Press CLOCK 1 2 3 2 Set the time OFF CANCEL 1 AC RC SET CHECK CLOCK RESET 3 Confirm Basic operation 1 Select the desired mode AUTO HEAT RFP FAN DRY COOL AUTO HEAT COOL FAN SPEED AIR 2 Start/stop the operation DRY SWING FAN 2 OFF/ON AUTO ECONAVI COMFORT 3 MODE 1 RFP TEMP AIR SWING POWERFUL/ QUIET FAN SPEED TIMER ON SET 1 2 3 OFF CANCEL AC RC SET CHECK CLOCK RESET POWER • Please note that the OFF indication is on to start. 3 Select the desired temperature • Selection range (Not applicable for FAN mode): 60°F ~ 86°F / 16°C ~ 30°C. • Operating the unit within the recommended temperature may save energy. HEAT : 68°F ~ 75°F / 20°C ~ 24°C. COOL : 78°F ~ 82°F / 26°C ~ 28°C. DRY : 2°F ~ 4°F / 1°C ~ 2°C lower than room temperature. 26ft/8m • To dim or restore the unit's indicator brightness, press and hold for 5 seconds. • Use remote control within 26ft/8m from the remote control receiver of the indoor unit. The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subject to change without notice for future improvement. Table of contents Safety precautions 4-5 How to use 6-7 To learn more 8-9 Cleaning instructions 10 Troubleshooting 11 Information 12 Accessories • Remote control • AAA or R03 batteries × 2 • Remote control holder • Screws for remote control holder × 2 3 English