Panasonic CSXE9PKUA CS-XE12PKUA User Guide - Page 8

To learn more... Operation mode AUTO : During operation mode selection the POWER indicator blinks. • Unit selects operation mode every 10 minutes according to setting temperature and room temperature. HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation. COOL : Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode. DRY : Unit operates at low fan speed to give a gentle cooling operation. FAN : To circulate air in the room. ECONAVI and AUTO COMFORT ECONAVI AUTO or COMFORT The unit will start to initialize (for approximately 1 minute) The human activity sensor will start to detect. Human activity sensor operation ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy. Mode COOL/DRY HEAT Human Low activity Normal activity High activity Set temperature +2°F / +1°C -4°F / -2°C Absent +4°F / +2°C -4°F / -2°C AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human comfortable consistently. Mode Human Low activity Normal activity High activity Absent COOL/DRY Set temperature +2°F / +1°C +0.5°F / +0.3°C -2°F / -1°C +4°F / +2°C HEAT Set Fan Speed +1 tap* -4°F / -2°C +1 tap -4°F / -2°C ”0HGLXP)DQ * During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached. ** During human absence, maximum fan speed for COOL/DRY mode is medium fan. The human activity sensor will also scan for area of heat source and movement in a room. Detection area • The human activity sensor performance is influenced by indoor unit location, movement speed, temperature range, etc. • The human activity sensor may: - mistakenly detect an object with heat source & movement similar to human, such as pets, etc. - mistakenly detect as non-heat source & movement if a human stays motionless for certain period of time. • Do not place large objects near the sensor and keep away heating units or humidifier from the sensor's detection area. They may cause sensor malfunction. 120º 23ft/7m 8