Panasonic DVD-S53S Dvd/cd Player - English/spanish - Page 20

Changing the player settings  "AUDIO" menu SETTING STATE PCM OUTPUT Check the digital input limitations of the equipment you connect using COAXIAL terminal and select the maximum sampling frequency of PCM digital output. DOLBY DIGITAL With COAXIAL or HDMI AV OUT connections ( pages 8 and 9) DTS With COAXIAL or HDMI AV OUT connections ( pages 8 and 9) DYNAMIC RANGE Display the current setting of the items below UP TO 48kHz: When connected to equipment compatible with 44.1 or 48 kHz UP TO 96kHz: When connected to equipment compatible with 88.2 or 96 kHz • Signals from copy-protected discs are converted to 48 or 44.1 kHz. • Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz. Read your equipment's operating instructions for details. BITSTREAM Select "BITSTREAM" when the equipment PCM can decode the bitstream (digital form of multi-channel data). Otherwise, select "PCM". (If the bitstream is output to the equipment BITSTREAM without a decoder, high levels of noise can be PCM output and may damage your speakers and hearing.) ON: Adjusts for clarity even when the volume is low through compressing the range of the lowest sound level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital.) OFF Changing the player settings  When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend on the performance of this connected equipment.  "DISPLAY" menu SETTING STATE LANGUAGE Display the current setting of the items below ENGLISH FRANÇAIS ESPAÑOL  "HDMI" menu RQTC0128 SETTING STATE VIDEO PRIORITY 20 Display the current setting of the items below ON: When connected through the HDMI AV OUT terminal. Video is output from the HDMI terminal. Video is also output from the COMPONENT VIDEO OUT terminal, but only in 480i (interlace). OFF: When connected through the COMPONENT VIDEO OUT terminal. Video is output from the COMPONENT VIDEO OUT terminal according to the setting of "VIDEO OUT (I/P)" ( page 19, "VIDEO" menu). Video is also output from the HDMI terminal. AUDIO OUT RGB RANGE EZ Sync ON: Audio output is from HDMI AV OUT terminal. OFF: Audio output is not from HDMI AV OUT terminal. STANDARD ENHANCED: When the black and white images are not distinct. • It only works when the COLOR SPACE ( page 18, On-Screen Menu 4) is set to RGB. ON: The EZ SyncTM "HDAVI ControlTM" is available ( page 24). OFF  "OTHERS" menu SETTING STATE Display the current setting of the items below REGISTRATION Displays the unit's registration code. SHOW CODE: You need this registration code to purchase and play DivX Video-on-Demand (VOD) content ( page 24, About DivX VOD contents). JPEG TIME To change the slideshow timing 1 SEC to 15 SEC (in 1 unit) 15 SEC to 60 SEC (in 5 unit) 60 SEC to 180 SEC (in 30 unit) • "3 SEC" is the factory preset. FL DIMMER BRIGHT DIM Changes the brightness AUTO: The display is dimmed, but brightens only when you of the unit's display. perform some operations. AUTO POWER OFF ON: The unit switches to standby mode after about 30 minutes in the stop mode. OFF QUICK SETUP SET: Displays the QUICK SETUP settings DVD-VR/DATA Select format to play DVD-RAM discs. DVD-VR: To play DVD-VR on DVD-RAM. DATA: To play MP3 or JPEG contents on DVD-RAM. DEFAULTS RESET This returns all values in The password screen is shown if "RATINGS" ( page 19) is the Setup menus to the set. Please enter the same password and press [ENTER], default settings. then turn the unit off and on again.