Panasonic EW3039S Operating Instructions - Page 22

Irregular, pulse, function

Page 22 highlights

Irregular pulse function If the pulse rate varies by more than ±25% from the average while a measurement is being taken, when measurement is completed the mark will be displayed. • The C7 w mark will lit after approx. 6 seconds of blinking when the measurement is completed. • If the C mark is lit, please take the measurement again. • In some cases, if the pulse rate fluctuates greatly while a measurement is being taken, it may be impossible to obtain an accurate reading. Fig. 10-a (Flashes.) S t " „,,8 DIA. q Pulse /min. 88 Ar% Fig. 10-b (Is lit.) • If you save a reading where an irregular pulse was recorded, the mark will be displayed when you recall that reading (Fig. 10-b). If the C mark is displayed an irregular pulse rate is detected, not necessarily due to atrial fibrillation. However if this mark continues to display, consult your physician. * This function is designed to act as a guide to help you to obtain accurate readings (Please see pages 14-16). Even if the Eriv.v.0 mark is not displayed, we recommend that you take measurements 2-3 times at rest. * If the mark is frequently displayed, please consult a health professional for your health condition. Don't try to interpret readings or attempt to treat any condition yourself. Always follow the guidance of a health professional. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Irregular
pulse
function
If
the
pulse
rate
varies
by
more
than
±25%
from
the
average
while
a
measurement
is
being
taken,
when
measurement
is
completed
the
mark
will
be
displayed.
The
mark
will
lit
after
approx.
6
seconds
of
blinking
when
the
measurement
is
completed.
If
the
mark
is
lit,
please
take
the
measurement
again.
In
some
cases,
if
the
pulse
rate
fluctuates
greatly
while
a
measurement
is
being
taken,
it
may
be
impossible
to
obtain
an
accurate
reading.
Fig.
10-a
(Flashes.)
Fig.
10-b
(Is
lit.)
If
you
save
a
reading
where
an
irregular
pulse
was
recorded,
the
mark
will
be
displayed
when
you
recall
that
reading
(Fig.
10-b).
21