Panasonic EY7206 EY7206 User Guide - Page 9

To set the belt hook angle, position, How to use the belt hook, To change the belt hook, location

Get Panasonic EY7206 - 12V IMPACT DRIVER PDF manuals and user guides View all Panasonic EY7206 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

How to use the belt hook WARNING: • Be sure to attach the belt hook securely to the main unit with the screw firmly fastened. When the belt hook is not firmly attached to the main unit, the hook may depart and the main unit may fall. This may result in an accident or injury. • Be sure to attach the belt hook firmly and securely onto a waist belt or other belt. Pay attention to the unit not slipping off from the belt. This may result in an accident or injury. • When the main unit is held by the belt hook, avoid jumping or running with it. Doing so may cause the hook to slip and the main unit may fall. This may result in an accident or injury. • When the belt hook is not used, be sure to return it to the storing position. The belt hook may catch on something. This may result in an accident or injury. • When the unit is hooked onto the waist belt by the belt hook, do not attach driver bits to the unit. A sharp edge object, such as a drill bit, may cause injury or an accident. To set the belt hook angle position 1. Slide the belt hook lock lever # and hold it to unlock the belt hook. 2. Pull the belt hook from $ storing position $ and # set it as desired angle. 3. Release the belt hook % lock lever to lock the angle of belt hook. 4. Make sure the belt hook is firmly locked %. Also make sure the belt hook is firmly locked into position. • The belt hook cannot be locked in this position. Firmly lock it into position before use. To return the belt hook to the storing position, Follow step 1. and 2. above, then lower the belt hook. To secure the lock, follow 3 and 4 above. To change the belt hook location side The belt hook can be attached to either side of the unit. 1. Set the belt hook at storing position. 2. Loosen the screw turning it counter- clock-wise, using a coin or a flat blade screw driver 3. Take out the belt hook and insert into the other side of the slot on the main unit 4. Fasten the screw firmly, turning it clockwise The belt hook can be taken out from the main unit only when it is at storing position. -9-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
– 9 –
WARNING:
• Be sure to attach the belt hook
securely to the main unit with the screw
firmly fastened. When the belt hook is
not firmly attached to the main unit, the
hook may depart and the main unit
may fall.
This may result in an accident or injury.
• Be sure to attach the belt hook firmly
and securely onto a waist belt or other
belt. Pay attention to the unit not
slipping off from the belt.
This may result in an accident or injury.
• When the main unit is held by the belt
hook, avoid jumping or running with it.
Doing so may cause the hook to slip
and the main unit may fall.
This may result in an accident or injury.
• When the belt hook is not used, be
sure to return it to the storing position.
The belt hook may catch on something.
This may result in an accident or injury.
• When the unit is hooked onto the waist
belt by the belt hook, do not attach
driver bits to the unit.
A sharp edge object, such as a drill bit,
may cause injury or an accident.
To set the belt hook angle
position
1. Slide the belt hook lock lever
#
and
hold it to unlock the belt hook.
2. Pull the belt hook from
storing position
$
and
set it as desired angle.
3. Release the belt hook
lock lever to lock the
angle of belt hook.
4. Make sure the belt hook is firmly locked
%
. Also make sure the belt hook is firmly
locked into position.
• The belt hook cannot
be locked in this posi-
tion. Firmly lock it into
position before use.
To return the belt hook to the storing
position, Follow step 1. and 2. above, then
lower the belt hook.
To secure the lock, follow 3 and 4 above.
How to use the belt hook
1. Set the belt hook at storing position.
2. Loosen the screw turning it counter-
clock-wise, using a coin or a flat blade
screw driver
3. Take out the belt hook and insert into
the other side of the slot on the main
unit
4. Fasten the screw firmly, turning it clock-
wise
The belt hook can be taken out from the
main unit only when it is at storing position.
To change the belt hook
location side
The belt hook can be attached to either
side of the unit.
$
#
%