Panasonic FV08VS1 FV08VKL1 User Guide - Page 6

INSTALLATION I (JOIST MOUNTING-I) CONTINUED 3. Install the suspension bracket and the flange of fan body to joists by using long screws (ST4.2X20) ( If spacing A between joists is 12 inches, install the flange of fan body according to Fig. 3-1, others according to Fig. 3-2 to install the product) Joist Joist Fan body 2 Long screws (ST4.2X20) Fig. 3-1 Fan body 4. Install the suspension bracket to joists by using long screws (ST4.2X20) and secure it to the fan body by using screw II (ST4.2X12) (Fig. 4) 5. Remove junction box cover and secure conduit or stress relief to junction box knock-out hole. (Fig. 5) 6. Refer to wiring diagram of page 2. Using wire nuts, connect house power wires to ventilating fan wires: black to black; white to white; green to green; Replace the junction box cover. CAUTION: Mount junction box cover carefully so that lead wires are not pinched. 7. Install a duct and secure it with duct tape or clamps. 4 Long screws(ST4.2X20) Fig. 3-2 Joist 2 Long screws (ST4.2X20) O Screw II (ST4.2X12) Fig. 4 Duct Conduit Junction box cover Joist Duct tape Conduit Junction box 0 Lead wires Green wires 6 Wire nut Fig. 5