Panasonic FV15VQL4 Installation Instructions - Page 7
Fig.3-2
View all Panasonic FV15VQL4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INSTALLATION I (JOIST MOUNTING-I) CONTINUED 3. Install the suspension bracket and the flange of fan body to joists by using long screws (ST4.2X20) (If spacing A between joists is 10 1/4-12 inches, install the flange of Joist fan body according to Fig.3-2, others according to Fig.3-1 install the product) Joist Fan body 4 Long screws (ST4.2X20) Fig.3-1 A=10 1/4-12 inches Joist 4. Install the suspension bracket to joists by using long screws (ST4.2X20) and secure it to the fan body by using screw II (ST4.2X12) (Fig.4) 5. Remove junction box cover and secure conduit or stress relief to junction box knock-out hole. (Fig.5) 6. Refer to wiring diagram below. (page 5) Using wire nuts, connect house power wires to ventilating fan wires: black to black; white to white; green to green; Replace the junction box cover. (Fig.5) CAUTION: Mount junction box cover carefully so that lead wires are not pinched. 7. Install a circular duct (08/11VQL4 using 4 inches duct and 15VQL4 using 6 inches duct) and secure it with duct tape or clamps. Joist Fan body 2 Long screws (ST4.2X20) Fig.3-2 Joist 2 Long screws (ST4.2X20) screw II (ST4.2x12) Fig.4 Circular duct Conduit Junction box cover Duct tape or clamps Conduit Junction box Lead wires Green wires 7 Wire nut Fig. 5