Panasonic HDC-SDX1H HDCSDX1 User Guide - Page 42

QUICK POWER ON], QUICK START], Close the LCD monitor while the mode is set, Open the LCD monitor.

Get Panasonic HDC-SDX1H PDF manuals and user guides View all Panasonic HDC-SDX1H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

[QUICK POWER ON] [OFF]/[ON] The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to or . ≥ Depending on the recording conditions, start time may be longer than 1 second. ≥ In the Quick power on mode, the zoom magnification becomes 1k. [QUICK START] [OFF]/[ON] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. ≥ Start time will not be shortened if there is no SD card inserted. ≥ Change the mode to or . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor while the mode is set  to or . The status indicator A flashes green and the unit goes into Quick start standby mode. 3 Open the LCD monitor. The status indicator A lights red and the unit is  put into recording pause. ≥ Quick Start Standby Mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds slower in Still Picture Recording Mode. ≥ It may take some time for Automatic white balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes 1k. ≥ If [ECONOMY] (l 41) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Turn the unit off using the power button. 42 VQT2W55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
42
VQT2W55
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to
or
.
≥
Depending on the recording conditions, start time may be longer than 1 second.
≥
In the Quick power on mode, the zoom magnification becomes 1
k
.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥
When in Quick start standby mode about 80% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Start time will not be shortened if there is no SD card inserted.
≥
Change the mode to
or
.
1
Set
[QUICK START]
to
[ON]
.
2
Close the LCD monitor while the mode is set
to
or
.
The status indicator
A
flashes green and the unit goes
into Quick start standby mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is
put into recording pause.
≥
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
≥
Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds
slower in Still Picture Recording Mode.
≥
It may take some time for Automatic white balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes 1
k
.
≥
If [ECONOMY] (
l
41) is set to [5 MINUTES] and the unit automatically goes into Quick
Start Standby Mode, close the LCD monitor and then open it again.
≥
Turn the unit off using the power button.
[QUICK POWER ON]
[OFF]/[ON]
[QUICK START]
[OFF]/[ON]