Panasonic HDC-SDX1H HDCSDX1 User Guide - Page 63
SHOOTING GUIDE], WIND NOISE CANCELER], ZOOM MIC], Change the mode
View all Panasonic HDC-SDX1H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
[SHOOTING GUIDE] Message is displayed when this unit is moved rapidly. ≥ Change the mode to . : [RECORD SETUP] # [SHOOTING GUIDE] # [ON] When "CAMERA PANNING IS TOO FAST." appears, move the unit slowly while recording. ≥ Set to [OFF] to turn off the message indication. ≥ Message will not appear while pausing the recording. (Message will appear even if it is pausing the recording if [DEMO MODE] is set to [ON].) ≥ In some recording conditions, messages may not appear. [WIND NOISE CANCELER] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Change the mode to . ≥ Switch to Manual Mode. (l 70) : [RECORD SETUP] # [WIND NOISE CANCELER] # [ON] ≥ This function's default setting is [ON]. ≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the setting cannot be changed. ≥ You may not see the full effect depending on the recording conditions. [ZOOM MIC] Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle). ≥ Change the mode to . ≥ Switch to Manual Mode. (l 70) : [RECORD SETUP] # [ZOOM MIC] # [ON] 63 VQT2W55