Panasonic HDC-TM300K Hd Sd Camcorder - Multi Language - Page 134
If the driver has not been, recognized properly, To disconnect USB cable safely
UPC - 037988983957
View all Panasonic HDC-TM300K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
∫ If the driver has not been recognized properly Use the following methods to enable it to be recognized. Method 1: Turn off the unit and your PC once and try verifying again. Method 2: Remove the SD card and try verifying again. Method 3: Try connecting the unit to another USB port on your PC. ∫ To disconnect USB cable safely 1 Double click the ( ) icon in task tray displayed on the PC. ≥ Depending on your PC's settings, this icon may not be displayed. 2 Select [USB Mass Storage Device] and click [Stop]. 3 Verify [MATSHITA HDC-TM300/SD USB Device] or [MATSHITA HDC-TM300/MEM USB Device] is selected and click [OK]. Verify [MATSHITA HDC-HS300/SD USB Device] or [MATSHITA HDC-HS300/HDD USB Device] is selected and click [OK]. 134 VQT1Z09
134
VQT1Z09
∫
If the driver has not been
recognized properly
Use the following methods to enable it to be
recognized.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
∫
To disconnect USB cable safely
1
Double click the
(
) icon in task
tray displayed on the PC.
≥
Depending on your PC’s settings, this icon
may not be displayed.
2
Select [USB Mass Storage Device] and
click [Stop].
3
Verify [MATSHITA HDC-TM300/SD USB
Device] or [MATSHITA HDC-TM300/MEM
USB Device] is selected and click [OK].
Verify [MATSHITA HDC-HS300/SD USB
Device] or [MATSHITA HDC-HS300/HDD
USB Device] is selected and click [OK].