Panasonic HDC-TM300K Hd Sd Camcorder - Multi Language - Page 72
Digital cinema, Select the menu., Relay recording
UPC - 037988983957
View all Panasonic HDC-TM300K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Function Digital cinema Relay recording Effect/Setting method Use this function to record an image with vivid color, like an image on a movie film. ≥ Change the mode to . ≥ The Intelligent Auto Mode is set to off. (l 47) ≥ Set the recording mode to HA or HG. (l 53) Select the menu. (l 33) [RECORD SETUP] # [DIGITAL CINEMA] # [ON] ≥ The shutter speed is 1/48 or more. (When [AUTO SLOW SHTR] is [ON], it is 1/24 or more.) ≥ In Digital Cinema Mode, the images are recorded at a rate of 24 frames per second so the images may not appear smooth. It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. ≥ Change the mode to . Select the menu. (l 33) [RECORD SETUP] # [RELAY REC] # [ON] ≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts. ≥ It allows you to record only to SD card from built-in memory. ≥ Relay recording can only be performed once. ≥ Combine the scenes that were relay recorded using the [RELAY SCENE COMBINE] into the SD card. (l 105) ≥ Once the relay recorded scene and the scene that was recorded on the SD card after that are combined into the SD card using the [RELAY SCENE COMBINE], it will be possible to perform the relay recording again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE COMBINE], a message is displayed. You will be able to perform relay recording by touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that. 72 VQT1Z09