Panasonic KX-P7305 Laser Printer
Panasonic KX-P7305 - MONO DUPLEX LASER PRINTER 19PPM Manual
 |
UPC - 092281830124
View all Panasonic KX-P7305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic KX-P7305 manual content summary:
- Panasonic KX-P7305 | Laser Printer - Page 1
Laser Printer Operating Instructions Model No. KX-P7305 / KX-P7310 KX-P7305 is supplied without a network interface. KX-P7310 comes standard with a USB, Parallel, and Network interfaces. The Operating Instructions consist of the following 3 files. • Print.pdf • Mainte.pdf • Network.pdf These files - Panasonic KX-P7305 | Laser Printer - Page 2
Thank you for purchasing a Panasonic Laser Printer. We are sure it will meet your printing needs and give you many years of productive and efficient use. Printing in PCL and PostScript In addition to printing in the PCL Emulation or PostScript® Emulation for Microsoft® Windows® operating system, it - Panasonic KX-P7305 | Laser Printer - Page 3
default settings for compatibility with application software running in the MS-DOS® operating system. Animated Help Feature (see "Status Display" on page 68 (Windows) in "Settings and Printing") The Printer Status Display alerts the user of common operational errors. Click the ! button for animated - Panasonic KX-P7305 | Laser Printer - Page 4
. • Microsoft, Windows, Windows NT and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or Adobe Systems Incorporated in the United States and/or other countries. • Apple, AppleTalk, iMac, LaserWriter, Mac, Mac OS, Macintosh and TrueType - Panasonic KX-P7305 | Laser Printer - Page 5
, Inc. All rights reserved. End-user should not copy the program on the ROM in the printer. End-user cannot be guaranteed against the program on the ROM in the printer by Wind River Co., Ltd. The operating instructions are subject to change without notice. © Panasonic Communications Co., Ltd. 2003 - Panasonic KX-P7305 | Laser Printer - Page 6
27 Contents of Windows Section 27 Remote Control Panel 28 Setting the Printer Driver 44 Status Display 68 Index 80 Macintosh 82 Contents of Macintosh Section 82 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2 83 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 98 Index 116 - Panasonic KX-P7305 | Laser Printer - Page 7
3 Part Names 5 Printer Panel 6 Indicators 6 PRINT / RESET Button 8 About Media 9 Available Media and Media Size 9 Available Paper Weights and Capacity 10 Recommended Media 10 Loading Media and Printing 11 Margins and Print Area 12 Using the Media Tray 13 Using the Manual Feed 21 Index - Panasonic KX-P7305 | Laser Printer - Page 8
at a time.) Ink jet media Not genuine toner • Media for ink jet printers (paper, transparency, etc.) or transparency for color laser printers; may wrap around the fuser heat roller and cause damage, and may need to be replaced. • Any toner other than genuine Panasonic toner; it may damage the - Panasonic KX-P7305 | Laser Printer - Page 9
, connector for 2nd feeder and network (KX-P7310 only) • Electrical components, connectors inside the printer ■ Interface Cable Always use a shielded surge protector, it may cause a printer error. ■ Ventilation Space Adequate ventilation space is required between the printer and any walls, 20 mm (8 - Panasonic KX-P7305 | Laser Printer - Page 10
Basics Windows Part Names ■ Front Side View Front cover Manual feed (see pages 9 , 21) Media tray (see pages interface connector (Ethernet) - KX-P7310 only Connector for 2nd feeder (option) AC inlet Macintosh 5 Part Names Paper support (see pages 17, 21) Output tray Printer panel (see page 6) - Panasonic KX-P7305 | Laser Printer - Page 11
Basics Windows Printer Panel Macintosh 6 Printer Panel Indicators READY ERROR TONER/ DRUM UNIT PRINT / RESET PRINT / RESET button Indicators Three indicators show the following printer's status. READY ERROR TONER/ DRUM UNIT *1 *1 : Indicator is lit. : Indicator is turned off. : Indicator - Panasonic KX-P7305 | Laser Printer - Page 12
and Specifications" for troubleshooting. Media jam has occurred. Manual feed is empty. Media tray (standard) or lower tray (2nd feeder) is empty. Media tray (standard) is not installed. Drum unit is not installed in the printer. Toner may be empty. Drum unit is worn out. Drum unit is wearing out - Panasonic KX-P7305 | Laser Printer - Page 13
Basics Windows Macintosh 8 Printer Panel PRINT / RESET Button The printer executes the following action depending on the printer status by pressing this button. READY ERROR TONER/ DRUM UNIT Printer Status To recover from the error status (overrun or memory overflow), press the PRINT / RESET - Panasonic KX-P7305 | Laser Printer - Page 14
mm (8.5″ x 14″) 182 x 257 mm (7.2″ x 10.1″) X X X X X X X X X ❍: supported X: not supported *1 Cotton paper and thick paper cannot be used for dupelx printing and printing from 2nd feeder. *2 If you print a document on custom size paper, print it using the application software that page size can be - Panasonic KX-P7305 | Laser Printer - Page 15
Weights and Capacity 10 About Media Media Plain paper Paper weights Thick paper Envelope Paper capacity X: not supported Paper Transparency Label Envelope Media tray 60 - 105 g/m2 (16 - 28 lb.) X 90 g/m2 (24 lb.) 250 sheets [75 g/m2 (20 lb.)] 20 sheets X 30 sheets Manual feed 60 - 105 - Panasonic KX-P7305 | Laser Printer - Page 16
Windows Macintosh 11 Loading Media and Printing Loading Media and Printing See the setup guide(s) for the following instructions. • Installing the toner cartridge and drum unit • Connecting cables • Installing the printer software The media is printed out to the output tray (top of the printer - Panasonic KX-P7305 | Laser Printer - Page 17
Basics Windows Macintosh 12 Loading Media and Printing Margins and Print Area The image (print area) is printed a bit smaller than the media size. 4.2 mm (0.17″) is required from the top, bottom and sides margins. You may need to adjust the page margins in the application software to match the - Panasonic KX-P7305 | Laser Printer - Page 18
Basics Windows Macintosh Using the Media Tray 1 Pull the media tray out of the printer. 13 Loading Media and Printing 2 Pinch the media guides and slide them to the approximate width (1) and length (2) of the media. 2 1 - Panasonic KX-P7305 | Laser Printer - Page 19
When loading legal paper, slide the length guide unit (2) to extend while pressing the stopper (1). 2 1 • If the media guide is removed, slide it back in. Media guide • If the metal plate is in the up position, the media tray cannot be inserted into the printer. Push the metal plate down until it - Panasonic KX-P7305 | Laser Printer - Page 20
Basics Windows Macintosh 15 Loading Media and Printing 3 Tap the media stack on a level in a smudged print. • Reusing media (used paper or jammed paper) that has been fed through the printer once can reduce the life of the consumables and paper path components. 4 Place media with the print side - Panasonic KX-P7305 | Laser Printer - Page 21
Basics Windows Transparency Macintosh 16 Loading Media and Printing Print side down Max. 20 sheets Envelope Flap Print side down Max. 30 sheets Flap (International C5opening on the shorter edge) NOTE • Most media has instructions recommending the side to be printed first. • Do not mix - Panasonic KX-P7305 | Laser Printer - Page 22
Windows Macintosh 17 Loading Media and Printing 7 Raise the paper support so that the media is not dropped from the output tray. • It is recommended to print envelopes with the rear cover of the printer open to avoid curling or wrinkles. Paper support the printer driver following the steps below. - Panasonic KX-P7305 | Laser Printer - Page 23
's driver setting depending on the operating system. For Windows®*1 (1) Display the print window in the application software. (2) Select Panasonic KX-P7305 PCL6, Panasonic KX-P7305 PS, Panasonic KX- P7310 PCL6 or Panasonic KX-P7310 PS printer. (3) Click Properties ([Preferences] for Windows XP - Panasonic KX-P7305 | Laser Printer - Page 24
menu. • When selecting the Auto, be sure that the media is not inserted in the manual feed. Otherwise, the media may be fed from the manual feed. • If the optional 2nd feeder is installed in the printer, Option Cassette can be available. • Auto Select is invalid selection. (7) Specify media type - Panasonic KX-P7305 | Laser Printer - Page 25
Basics Windows Macintosh 20 Loading Media and Printing For Mac OS X 10.1 - Mac OS X 10.2 (1) Open a document to print. (2) Select Page Setup... from the application's File menu. (3) Select your printer from the Format for menu. (4) Specify the paper size (Page Attributes) and click [OK]. (5) - Panasonic KX-P7305 | Laser Printer - Page 26
Basics Windows Macintosh 21 Loading Media and Printing Using the Manual Feed The manual feed serves as an or labels, use the manual feed. 1 Raise the paper support so that the media is not dropped from the output tray. •It is recommended to open the rear cover of the printer to avoid curls or - Panasonic KX-P7305 | Laser Printer - Page 27
Basics Windows Macintosh 22 Loading Media and Printing 3 Insert media with the printing side up into the manual feed while adjusting the media guides to the media width. The inserted media is slightly fed into the manual feed automatically. • Be sure to insert media into the manual feed one at a - Panasonic KX-P7305 | Laser Printer - Page 28
print window in the application software. (2) Select Panasonic KX-P7305 PCL6, Panasonic KX-P7305 PS, Panasonic KX- P7310 PCL6 or Panasonic KX-P7310 PS printer. (3) Click Properties ([Preferences] for Windows XP / Windows Server 2003) to display the printer properties window. (4) Select Manual Feed - Panasonic KX-P7305 | Laser Printer - Page 29
1, be sure to remove the media every time the media is printed out. For Mac OS X 10.1 - Mac OS X 10.2 (1) Open a document to print. (2) Select Page Setup... from the application's File menu. (3) Select your printer from the Format for menu. (4) Specify the paper size (Page Attributes) and click [OK - Panasonic KX-P7305 | Laser Printer - Page 30
support 5, 17, 21 Paper weights 10 Parallel interface 5 Part names 5 Power source 4 Power switch 5 Print area 12 PRINT/RESET button 6, 8 Printer panel 5, 6 Printing Using manual feed 21 Using media tray 13 R READY indicator 6 Rear cover 5, 11, 17, 21 Recommended media 10 T TONER/DRUM - Panasonic KX-P7305 | Laser Printer - Page 31
Basics Windows Macintosh U USB interface 5 V Ventilation space 4 26 Index - Panasonic KX-P7305 | Laser Printer - Page 32
the Settings 31 Tool Menus (Tool Bar Icons 32 Tree Menus 34 Outline for Menus 38 Setting the Printer Driver 44 Displaying the Printer Properties Window 44 Displaying Help of the Printer Properties Window 47 Defining the Installed Options 48 Setting the Form To Tray Assignment 50 Sharing the - Panasonic KX-P7305 | Laser Printer - Page 33
setting. The printer's setting is only displayed or not displayed (N/A). ■ Available Operating System The Remote Control Panel is available in the following operating system. Windows 95*1, Windows 98*2, Windows Me*3, Windows NT® 4.0*4, Windows 2000*5 or Windows XP, Windows Server 2003 *1Microsoft - Panasonic KX-P7305 | Laser Printer - Page 34
29 Remote Control Panel Displaying the Remote Control Panel Window 1 Click [Start], move the pointer to Programs or All Programs, Panasonic and Panasonic KX-P7305 and KX-P7310, then click Remote Control Panel. • If more than one printer is connected to your computer, the screen prompts to - Panasonic KX-P7305 | Laser Printer - Page 35
(see page 42) (see page 43) *1 If your printer is KX-P7305, the Network menu is not displayed. (KX-P7310 only) Displaying the Firmware Version and Installed Options 1 Display the Remote Control Panel window (see "Displaying the Remote Control Panel Window" on page 29). 2 Click the ✚ button on the - Panasonic KX-P7305 | Laser Printer - Page 36
Macintosh 31 Remote Control Panel Changing the Settings 1 Display the Remote Control Panel window (see page 29). 2 Click the ✚ button on the main menu from the tree menu. Or Double click the main select the value. 5 Click Tool menu and select Send to transfer the changed setting to the printer. - Panasonic KX-P7305 | Laser Printer - Page 37
Basics Windows Macintosh 32 Remote Control Panel Tool Menus (Tool Bar Icons) ■ File menu Refresh ( ) Updates the Remote Control Panel setting by loading the printer settings. Exit Exits the Remote Control Panel. ■ Tool menu Send ( ) Transfers the changed settings to the printer. Factory - Panasonic KX-P7305 | Laser Printer - Page 38
Basics Windows Macintosh 33 Remote Control Panel ■ Option menu Interface If more than one printer are connected to the computer, this menu is activated. You can select the printer to use with Remote Control Panel. ■ Help menu About Displays the version of the Remote Control Panel software. Help - Panasonic KX-P7305 | Laser Printer - Page 39
Windows Information Paper Source Media Type Media Size Selection 2 AutoSelect Tray* Manual Feed Media tray / Upper*1 Lower*1 Plain Paper* Thick Paper A5 Com-9 Env Com-10 Env Monarch Env B5 A6 DL Env C5 Env *1 If an optional 2nd feeder is installed on the printer, the Media tray is changed - Panasonic KX-P7305 | Laser Printer - Page 40
Basics Windows Macintosh 35 Back Left Calibration Selection 2 No assignment* Letter Legal Executive A4 A5 Com-9 Env Com-10 Env Monarch Env B5 A6 DL Env C5 Env No assignment* Letter Legal Executive A4 (0 - 120) *1 If an optional 2nd feeder is installed on the printer, these menus are displayed. - Panasonic KX-P7305 | Laser Printer - Page 41
Windows Macintosh 36 Remote Control Panel Menu Quality Font Network (KX-P7310 only) Adjustment to Media Selection 1 / Information Density Font Number Font pitch Font height Symbol set MAC address Printer Label Envelope #10 Envelope C5 Selection 2 Normal* (Lightest - Darkest) 0* (0 - 54) 10.00* - Panasonic KX-P7305 | Laser Printer - Page 42
Basics Windows Macintosh 37 Remote Control Panel Menu Others Information Selection 1 / Information Power save mode Auto continues Page Protection I/O timeout setting Printer Emulation Language Controller FW Engine FW Page Styler2 Memory Size Option Cassette Selection 2 5* (2, 5, 10, 15, 30, 60 - Panasonic KX-P7305 | Laser Printer - Page 43
Windows Outline for Menus Macintosh 38 Remote Control Panel ■ Paper Paper Source Selects the source feeding media. If the optional 2nd feeder is installed, Media tray will be changed to Upper and Lower selection is added. Media type Selects the type of media loaded in the media tray, manual - Panasonic KX-P7305 | Laser Printer - Page 44
Basics Windows Macintosh Front Top Calibration Adjusts the top margin of printing. Front Left Calibration Adjusts the left side margin of printing. Back Top Calibration Adjusts the - Panasonic KX-P7305 | Laser Printer - Page 45
Basics Windows Macintosh 40 Remote Control Panel ■ Network (KX-P7310 only) The network menu is displayed for the KX-P7310 only. MAC address Displays the MAC address. MAC address is a private number assigned to each network device. Printer name Displays the printer name. Protocol (TCP/IP) Enables - Panasonic KX-P7305 | Laser Printer - Page 46
Basics Windows Macintosh 41 Remote Control Panel ■ Adjustment to Media Print quality may vary do to moisture in the media. It enables adjustment to the printer's setting corresponding to the condition of media. To get better print quality, If media has high moisture, set it for + value (+1, +2 - Panasonic KX-P7305 | Laser Printer - Page 47
• PCL: PCL is selected for printing. NOTE • If the PostScript emulation is not used, select PCL for the Printer Emulation. It will become difficult that the memory overflow error occurs. Language Selects the language when printing the configuration page [see "Tool Menus (Tool Bar Icons)" on page 32 - Panasonic KX-P7305 | Laser Printer - Page 48
Basics Windows Macintosh 43 Remote Control Panel ■ Information Controller FW Displays the controller firmware version. Engine FW Displays the engine firmware version. Page Styler2 Displays the software version for PostScript. Memory Size Displays the total memory size installed in the printer. - Panasonic KX-P7305 | Laser Printer - Page 49
click or double click Printers and Faxes. • For Windows XP Home, click [Start], click Control Panel, click Printers and Other Hardware icon, then click Printers and Faxes icon. 2 Click the Panasonic KX-P7305 PCL6, Panasonic KX-P7305 PS, Panasonic KX-P7310 PCL6 or Panasonic KX-P7310 PS icon. 3 Click - Panasonic KX-P7305 | Laser Printer - Page 50
the Printer Driver 4 Click a tab to view the features. The explanation of the driver's setting menu can be read by clicking it with the right mouse button. (tab in Windows 98) • Tabs are different in Windows NT 4.0 / Windows 2000 / Windows XP / Windows Server 2003. • For Windows NT 4.0 / Windows - Panasonic KX-P7305 | Laser Printer - Page 51
click Print.... The Print window is displayed. 3 Select Panasonic KX-P7305 PCL6, Panasonic KX-P7305 PS, Panasonic KX-P7310 PCL6 or Panasonic KX-P7310 PS in the Name : box. 4 Click Properties ([Preferences] for Windows XP / Windows Server 2003). The printer properties window is displayed. 5 Click - Panasonic KX-P7305 | Laser Printer - Page 52
Macintosh 47 Setting the Printer Driver Displaying Help of the Printer Properties Window 1 Display the printer properties window (see page 44). 2 Perform the method [A] or [B]. [A] Click the desired menu with the right mouse button and click the displayed menu. Or [B] Click [?] button and - Panasonic KX-P7305 | Laser Printer - Page 53
click or double click Printers and Faxes. • For Windows XP Home, click [Start], click Control Panel, click Printers and Other Hardware icon, then click Printers and Faxes icon. 2 Click the Panasonic KX-P7305 PCL6, Panasonic KX-P7305 PS, Panasonic KX-P7310 PCL6 or Panasonic KX-P7310 PS icon. 3 Click - Panasonic KX-P7305 | Laser Printer - Page 54
49 Setting the Printer Driver ■ For Panasonic KX-P7305 PS or Panasonic KX-P7310 PS [In Windows 95 / Windows 98 / Windows Me] (1) Click Installed or installed memory in the Change Setting box. [In Windows 2000 / Windows XP / Windows Server 2003] (1) Click the Device Settings tab. (2) Click - Panasonic KX-P7305 | Laser Printer - Page 55
Basics Windows Macintosh 50 Setting the Printer Driver Setting the Form To Tray Assignment by the setting of the printer driver. ■ Using the Remote Control Panel 1 Click [Start], move the pointer to Programs or All Programs, Panasonic and Panasonic KX-P7305 and KX-P7310, then click Remote Control - Panasonic KX-P7305 | Laser Printer - Page 56
2003, click [Start], then click or double click Printers and Faxes. • For Windows XP Home, click [Start], click Control Panel, click Printers and Other Hardware icon, then click Printers and Faxes icon. 2 Click the Panasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 icon. 3 Click the File menu, then - Panasonic KX-P7305 | Laser Printer - Page 57
the Printer Driver Sharing the Printer Enables to share the printer over the network. ■ For Windows 95 / Windows 98 / Windows Me 1 Click [Start], move the pointer to Settings, then click Printers. 2 Click the Panasonic KX-P7305 PCL6, Panasonic KX-P7305 PS, Panasonic KX-P7310 PCL6 or Panasonic KX - Panasonic KX-P7305 | Laser Printer - Page 58
click or double click Printers and Faxes. • For Windows XP Home, click [Start], click Control Panel, click Printers and Other Hardware icon, then click Printers and Faxes icon. 2 Click the Panasonic KX-P7305 PCL6, Panasonic KX-P7305 PS, Panasonic KX-P7310 PCL6 or Panasonic KX-P7310 PS icon. 3 Click - Panasonic KX-P7305 | Laser Printer - Page 59
Macintosh 54 Setting the Printer Driver 10 Click [OK]. The Windows 95/Windows 98 Printer Drivers window is displayed. 11 Click [Browse]. The Locate File window is displayed. 12 Insert the supplied printer CD-ROM into the CD-ROM drive. 13 Select CD-ROM drive. 14 Open Win9x and open English, then - Panasonic KX-P7305 | Laser Printer - Page 60
Windows XP / Windows Server 2003). The printer Properties ([Preferences] for Windows XP / Windows Server 2003) window appears. • The operation for displaying the printer properties window may be different depending on the application software. 3 Set the printer driver. ■ For Panasonic KX-P7305 PCL6 - Panasonic KX-P7305 | Laser Printer - Page 61
. 2 Select Panasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 printer and click Properties ([Preferences] for Windows XP / Windows Server 2003). The printer properties window appears. • The operation for displaying the printer properties window may be different depending on the application software - Panasonic KX-P7305 | Laser Printer - Page 62
Basics Windows Macintosh 57 Setting the Printer Driver 1 Profile Name Displays the saved profile names. Profiles (DEFAULT and DRAFT) are registered by default and cannot be changed or deleted. You can set the driver by selecting the profile name saved in advance. 2 Save as... Enables to register - Panasonic KX-P7305 | Laser Printer - Page 63
KX-P7305 PS, Panasonic KX-P7310 PCL6 or Panasonic KX-P7310 PS printer and click Properties ([Preferences] for Windows XP / Windows Server 2003). The printer properties window appears. • The operation for displaying the printer properties window may be different depending on the application software - Panasonic KX-P7305 | Laser Printer - Page 64
the printer driver. ■ For Panasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 (1) Click on the Flip on long edge or Flip on short edge check button for Duplex menu in the Page Setup tab. A A : Flip on long edge A : Flip on short edge A ■ For Panasonic KX-P7305 PS or Panasonic KX-P7310 PS [In Windows - Panasonic KX-P7305 | Laser Printer - Page 65
. 2 Select Panasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 printer and click Properties ([Preferences] for Windows XP / Windows Server 2003). The printer properties window appears. • The operation for displaying the printer properties window may be different depending on the application software - Panasonic KX-P7305 | Laser Printer - Page 66
Basics Windows Macintosh 61 Setting the Printer Driver 1 Watermark Enables the selected watermark in the box. The selected watermark is printed over a document. Click the Watermark box and select the desired one. TOP - Panasonic KX-P7305 | Laser Printer - Page 67
Basics Windows Macintosh 62 Setting the Printer Driver 2 Edit • Text: Enables to create/edit a watermark text by or right or clicking or . To specify the position of watermark, it enables to select the unit inch or mm by clicking on the check button. • Center Watermark Enables to reset the - Panasonic KX-P7305 | Laser Printer - Page 68
Driver ■ Printing a Watermark The following is the example to print the watermark COPY on all pages. 1 Open a document to print with the watermark and display the print window. 2 Select the Panasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 printer. 3 Click Properties ([Preferences] for Windows XP - Panasonic KX-P7305 | Laser Printer - Page 69
Basics Windows Macintosh 64 Setting the Printer Driver Overlay Printing You can use the Overlay feature to: • Incorporate your letterhead on the first page of a business letter. • Print your logo at the bottom - Panasonic KX-P7305 | Laser Printer - Page 70
the overlay data by printing it. 3 Display the print window and select the Panasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 printer. 4 Click Properties ([Preferences] for Windows XP / Windows Server 2003) to display the printer properties window. 5 Click [Advanced...] in the Page Setup tab, then - Panasonic KX-P7305 | Laser Printer - Page 71
to print with the overlay file and display the print window. 13 Select the Panasonic KX-P7305 PCL6 or Panasonic KX-P7310 PCL6 printer. 14 Click Properties ([Preferences] for Windows XP / Windows Server 2003) to display the printer properties window. 15 Click [Advanced...] in the Page Setup tab, then - Panasonic KX-P7305 | Laser Printer - Page 72
Basics Windows Macintosh 67 Setting the Printer Driver 16 Click on the check box of your desired selection. Print With Overlay: The overlay file is overlapped only on the first page (Overlay 1st - Panasonic KX-P7305 | Laser Printer - Page 73
general information • Network setting information (KX-P7310 only) When an error has occurred, the Status Display icon ( ) is blinking on the task bar or a Printer Status Display window is displayed. The Status Display icon is different depending on the printer error. Status Display Icon on the - Panasonic KX-P7305 | Laser Printer - Page 74
Macintosh 69 Status Display Displaying the Status Display Window 1 Turn the printer on. 2 Click [Start], move the pointer to Programs or All Programs, Panasonic and Panasonic KX-P7305 and KX-P7310, then click Status Display. When staring the Status Display program for the first time, the Search - Panasonic KX-P7305 | Laser Printer - Page 75
's IP address or server name will be displayed. 3 The loaded media, printer's information, error recovery and network information (KX-P7310 only) are displayed by clicking on the More Information check box (see "More Information Window" on page 71). 4 The status display is closed by clicking [Close - Panasonic KX-P7305 | Laser Printer - Page 76
and Recovery Information. ■Information tab Shows the media information that set with the Remote Control Panel (see "Remote Control Panel" on page 28). Opens the window to display the following information by clicking [Detail...]. •Printer Information (see page 72) •Network Information (see page 73) - Panasonic KX-P7305 | Laser Printer - Page 77
Windows Macintosh ■ Printer Information Tab Shows the firmware version and the information of the installed options. 72 Status Display Serial Number Controller FW Version Engine ROM Version Memory Size Total Page Density Power Save Auto Continue Time Out Page Protection Displays the printer - Panasonic KX-P7305 | Laser Printer - Page 78
Basics Windows Macintosh 73 Status Display ■ Network tab (KX-P7310 only) Shows the network information of the printer: IP address, MAC address, etc. Option menus appear by clicking the + button of the Network Information in the left pane. The information appears in the right pane by - Panasonic KX-P7305 | Laser Printer - Page 79
Basics Windows Macintosh 74 Status Display AppleTalk Protocol Printer Name Zone Name AppleTalk protocol is enabled or disabled. Printer name (KX-P7310-######) on the AppleTalk. ###### indicates the last 3 byte of MAC address of the printer. Zone name of the AppleTalk. SMB Information Protocol - Panasonic KX-P7305 | Laser Printer - Page 80
Basics Windows Macintosh ■ Recovery Information tab 75 Status Display 1 2 3 4 56 1 Shows corrective action for the printer error with animation. 2 Shows corrective instructions or status. 3 Clicking this button starts the animation. When the animation is started, the start button is changed to - Panasonic KX-P7305 | Laser Printer - Page 81
has occurred by clicking on the Auto PopUp check button. The Status Display window is displayed when a printer error has occurred. After the error has recovered, the window is closed. NOTE • If the printer is connected to the network, certainly set the Status Display Type to Stay. 2 Beep Checking - Panasonic KX-P7305 | Laser Printer - Page 82
or computer name is entered in the Server Name box. NOTE • If the printer is not selected to get the printer status by using the Setup for Status Display window, the Search Device window will be displayed to select the printer when the status display is displayed for the first time. 4 Port Check - Panasonic KX-P7305 | Laser Printer - Page 83
Basics Windows Macintosh 78 Status Display Selecting the Printer to Get the Status 1 Click [Select...] in the Setup for Status Display window. Search Device window appears. - Panasonic KX-P7305 | Laser Printer - Page 84
Basics Windows Macintosh 79 Status Display 2 Specify the destination for searching by clicking on the check button. ALL: Searches all KX-P7310 printers, local and network. Local: Searches the local printers connected to you computer. Server name: Searches the name of the server computer sharing - Panasonic KX-P7305 | Laser Printer - Page 85
Windows Macintosh 80 Index Index A Adjustment to media 36 Auto continue 37, 42, 72 B Back Left Calibration 35, 39 Back Top Calibration 35, 39 C Copies 35, 38 D Density 36, 39, 72 DHCP 36, 40 Download 42 Lines per page 35, 38 M MAC address 36, 40 Manual feed 34 Media size 34, 38 Media - Panasonic KX-P7305 | Laser Printer - Page 86
Styler2 37, 43 Paper Size 34, 38 Paper Source 34, 38 Power save 37, 42, 72 Print Page Border 55 Printer driver 44 Printer name 36, 40 Printer properties window 44 Printer setting 28, 44 Printing Configuration page 32 Demo page 32 Duplex 58 Font list for PCL 32 Font list for PostScript - Panasonic KX-P7305 | Laser Printer - Page 87
96 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2 98 Adding the KX-P7310 in Print Center Connected with AppleTalk . . 98 Adding the Printer in Print Center Connected with USB 99 Setting the Printer to the Default Printer 99 Setting the Page Setup Window 100 Setting the Page - Panasonic KX-P7305 | Laser Printer - Page 88
-P7310 from the scroll list. • If an icon is not displayed on the left of the printer name you selected, follow the instructions below: (1) Click [Create]. (2) Select Panasonic KX-P7310 and click [Select]. (3) Specify the installed options. (4) Click [OK]. (5) Confirm an icon appears to the left of - Panasonic KX-P7305 | Laser Printer - Page 89
Basics Windows Macintosh 84 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) [B] Selecting the Printer Connected with USB After the setting for USB is completed, KX-P7305 or KX-P7310 icon is created on your desktop screen. To select the printer connected with USB, 1 Click the KX-P7305 or KX - Panasonic KX-P7305 | Laser Printer - Page 90
Basics Windows Macintosh 85 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) 3 Select your printer from the Format for. 1 2 3 4 1 Format for Select the printer to specify the printer driver. 2 Paper Selects a different paper size Letter, Legal, A4, B5 (ISO), Executive, A5, A6, Com9 ( - Panasonic KX-P7305 | Laser Printer - Page 91
Macintosh 86 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Displaying the Print Window 1 Open the file you want to print from within the application. 2 Select Print... from the application's File menu. 3 Select the KX-P7305 or KX-P7310 printer from the Printer menu. 4 Click General menu - Panasonic KX-P7305 | Laser Printer - Page 92
Basics Windows Macintosh 87 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Setting the General Menu 1 2 3 4 5 from 1st page to the last page. If you print 3 copies of a 5 pages document, printer prints page 1 through page 5 three times. Removing the check prints the copies of the 1st - Panasonic KX-P7305 | Laser Printer - Page 93
Windows Macintosh 88 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) 4 Paper Source • All pages from Enables to select the tray feeding media. If the optional 2nd feeder is installed in your printer 50). • Manual Feed Enables to print on any type of media one by one from the manual feed. It - Panasonic KX-P7305 | Laser Printer - Page 94
Basics Windows Macintosh 89 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Setting the Layout Menu 1 2 3 4 1 Pages per sheet Specifies number of pages of your document to print on one piece of paper. 2 Layout direction Specifies - Panasonic KX-P7305 | Laser Printer - Page 95
Basics Windows Macintosh 90 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) 4 Print on Both Sides Paper Source: Letter, Legal, A4, B5 or Executive in the Page Setup window (see page 84) Plain Paper in the Printer Specific Options menu (see page 91) Media Tray or Option Cassette in the - Panasonic KX-P7305 | Laser Printer - Page 96
Basics Windows Macintosh 91 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Setting the Printer Specific Options 1 2 3 4 1 Resolution throughput speed is diminished. 2 Toner Save Mode Enables to reduce the amount of toner used to print. Off: The toner save feature is turned off. This - Panasonic KX-P7305 | Laser Printer - Page 97
Basics Windows Macintosh 92 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) 3 Media Type Selects the type of media. Paper Source Media Tray Manual Feed Option Cassette Media Type Plain Paper, Cotton Paper*1, Transparency, Envelope Plain Paper, Transparency, Thick Paper, Cotton Paper, - Panasonic KX-P7305 | Laser Printer - Page 98
Basics Windows Macintosh 93 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) Setting the Installable Options The printer driver installed on the computer cannot automatically detect that an option has been installed in the printer. After installing an option in the printer, you must define - Panasonic KX-P7305 | Laser Printer - Page 99
Basics Windows Macintosh 94 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) 6 Click the option installed in your printer and select Installed or total installed memory. 7 Click [OK]. 8 Click [OK]. - Panasonic KX-P7305 | Laser Printer - Page 100
Basics Windows Macintosh 95 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) B Setting the options with printer icon for USB 1 Click the printer Setup... menu does not appear in the Printing menu, follow the instructions below. (1) Click Edit menu and select Preferences.... (2) Remove the - Panasonic KX-P7305 | Laser Printer - Page 101
Windows Macintosh 96 Setting the Printer Driver (Mac OS 8.5 - Mac Feeder has been installed, this selection can be selected. NOTE • Manual feed cannot be used for automatic duplex printing. 2 Open a document menu and select Printer Specific Options menu. 10 Select Plain Paper from Media Type. - Panasonic KX-P7305 | Laser Printer - Page 102
Basics Windows Macintosh 97 Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2) 11 Click Printer Specific Options menu and select Layout menu. 12 Click on the Print on Both Sides check box and click your desired binding style icon. 13 - Panasonic KX-P7305 | Laser Printer - Page 103
Basics Windows Macintosh 98 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Mac OS X intensively manages adding, deleting, searching a printer or displaying the printer status, etc. with the application Print Center. - Panasonic KX-P7305 | Laser Printer - Page 104
- Mac OS X 10.2) Adding the Printer in Print Center Connected with USB Be sure the printer is connected to the computer with the USB interface cable and turned it on. 1 Open the Print Center and choose Add Printer... from the Printers menu. 2 Choose USB as the connection type, and click KX-P7305 or - Panasonic KX-P7305 | Laser Printer - Page 105
Macintosh 100 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Page Setup Window 1 Open the file you want to print from within the application. 2 Select Page Setup... from your application's File menu. 3 Select the desired printer from the Format for. 4 Click Page - Panasonic KX-P7305 | Laser Printer - Page 106
Basics Windows Macintosh 101 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Page Attributes Menu 1 2 3 1 Paper Size Selects a different paper size. The following paper sizes can be selected. US Letter, US Legal, A4, B5 (ISO), Executive Envelope, A5, A6, Com9, #10 - Panasonic KX-P7305 | Laser Printer - Page 107
Macintosh 102 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Displaying the Print Window 1 Open a file to perform printing in your application. 2 Select Print... from your application's File menu. 3 Select your printer from the Printer menu. 4 Choose categories from pop-up - Panasonic KX-P7305 | Laser Printer - Page 108
Basics Windows Macintosh 103 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Duplex Output Options Paper Feed Error Handling Printer Features Summary Save Custom Setting Allows you to set the duplex printing (see page 106). • Print on Both Sides • Binding Allows you to output a - Panasonic KX-P7305 | Laser Printer - Page 109
Basics Windows Macintosh 104 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Copies & Pages Menu 1 3 1st page to the last page. If you print 3 copies of a 5 pages document, printer prints page 1 through page 5 three times. Clicking off this check box prints 3 copies - Panasonic KX-P7305 | Laser Printer - Page 110
Basics Windows Macintosh 105 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Layout Menu 1 2 3 1 Pages per Sheet Specifies how many pages of your document to print on one sheet of paper. 2 Layout Direction Specifies the - Panasonic KX-P7305 | Laser Printer - Page 111
Basics Windows Macintosh 106 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Duplex Menu 1 2 1 Print on Both Sides Performs the automatic duplex printing by clicking on the check box and selecting the binding style. To - Panasonic KX-P7305 | Laser Printer - Page 112
Basics Windows Macintosh 107 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Output Options Menu 1 2 1 Save as File Clicking on this check box saves a document as file in the selected format. Clicking off this check box prints a document to the printer. 2 Format - Panasonic KX-P7305 | Laser Printer - Page 113
Basics Windows Macintosh 108 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Paper Feed Menu 1 2 1 All pages from Selects the tray feeding media. If the optional 2nd Feeder is installed in the printer, Option Cassette is available. When adding printer with the Print - Panasonic KX-P7305 | Laser Printer - Page 114
109 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) • Media Tray Enables to print on media loaded in the standard tray of the printer. Thick paper [106 - 165 g/m2 (29 - 44 lb.)] or label cannot be printed with the media tray. Their media can be printed with the manual feed. • Option - Panasonic KX-P7305 | Laser Printer - Page 115
Basics Windows Macintosh 110 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Setting the Printer Features 1 2 3 4 1 Resolution throughput speed is diminished. 2 Toner Save Mode Enables to reduce the amount of toner used to print. Off:The toner save feature is turned off. This - Panasonic KX-P7305 | Laser Printer - Page 116
Basics Windows Macintosh 111 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) 1 Media Type Selects the type of media. Paper Source Media Tray Manual Feed Option Cassette Media Type Plain Paper, Cotton Paper*1, Transparency, Envelope Plain Paper, Transparency, Thick Paper, Cotton - Panasonic KX-P7305 | Laser Printer - Page 117
the Print Center. NOTE • When using Mac OS X 10.2, manually define the installed options with the Print Center. The Print Center is in the Utilities folder (Macintosh HD: Applications:Utilities). (1) Open the Print Center and click the KX-P7305 or KX-P7310 printer. (2) Select Show Info from the - Panasonic KX-P7305 | Laser Printer - Page 118
Windows Macintosh 113 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Printing from Classic Applications To print from a Classic application, the printer driver and PPD file for Mac OS 9 must be installed in your computer, then set the computer and printer (see the "Setup Guide - Panasonic KX-P7305 | Laser Printer - Page 119
Basics Windows Macintosh 114 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) Performing Duplex Printing 1 the Optional 2nd Feeder has been installed, this selection can be selected. NOTE • Manual feed cannot be used for automatic duplex printing. 2 Open a document to perform - Panasonic KX-P7305 | Laser Printer - Page 120
Basics Windows Macintosh 115 Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2) 12 Click Printer Features menu and select Duplex menu. 13 Click on the Print on Both Sides check box and click your desired binding style icon. 14 Click [ - Panasonic KX-P7305 | Laser Printer - Page 121
direction 89 Layout menu 89, 105 M Manual feed 88, 108 Media Tray 87, 88, 109 Media Type 91, 92, 111 Memory 93 O Option Cassette 88, 93, 109 Options setting 93, 112 Orientation 85, 101 Output Options menu 107 P Page Attributes menu 101 Page Setup window 84, 100 Pages 87, 104 Pages per - Panasonic KX-P7305 | Laser Printer - Page 122
Basics Windows Macintosh Printer driver Mac OS 8.5 - 9.2 83 Mac OS X 10.1 - 10.2 98 Printer Features menu 110 Printer Specific Options menu 91 Printing Duplex 96 R Remaining from 87, 88 Resolution 91, 110 S Save as File 107 Scale 85, 101 Selecting printer 83, 98 AppleTalk 83, 98 USB - Panasonic KX-P7305 | Laser Printer - Page 123
Driver 7 Cleaning the Printer 8 External 8 Internal 8 Clearing a Jam 13 Jam at STD / Jam at OP 14 Jam at A 17 Jam at B 19 Jam at C 22 Jam at D 24 Jam at E 25 Troubleshooting 27 Cleaning the Photosensitive Drum 37 Cleaning the Dust Scraper 41 Error Indication 43 Repacking Instructions - Panasonic KX-P7305 | Laser Printer - Page 124
of a supply is needed. Printer components Toner cartridge Drum unit Indicators ERROR TONER/ DRUM UNIT Message of printer status display Low Toner Change the toner cartridge soon. Toner Empty Replace the toner cartridge now. Change Drum Unit Change the drum unit soon. Drum Unit Worn out - Panasonic KX-P7305 | Laser Printer - Page 125
, Legal, A4, Envelope, Executive, OHP, Label 2 MB 399 (W) X 390 (D) X 254 (H) mm (15.7" X 15.4" X 10") Approx. 10 Kg {22 lbs.} Starter toner cartridge : 2,000 pages average Toner cartridge: 4,000 pages average Drum unit: 20,000 pages average Printing: 48 dBA Stadby: 27 dBA Intel 80C51 compatible - Panasonic KX-P7305 | Laser Printer - Page 126
by installing this option. Refer to the installation manual included in the carton box with the option. RAM Board: 16 MB (KX-PEM12) or 32 MB (KX-PEM13) Installed to increase the printer's memory. To install it, see the following instructions. Installing the RAM Board CAUTION • To prevent static - Panasonic KX-P7305 | Laser Printer - Page 127
Settings and Printing Maintenance and Spec. 2 Slide the option cover and remove it. Network 5 Upgrade Options 3 Remove the two screws (1) and slide the metal plate up while pressing it (2), then remove it (3). 3 1 2 1 - Panasonic KX-P7305 | Laser Printer - Page 128
plate with the two screws removed earlier. 7 Install the option cover. 8 Plug in the power cord and reconnect any cables to the back of the printer. - Panasonic KX-P7305 | Laser Printer - Page 129
's installed memory (see "Defining the Installed Options" on page 48 of "Settings and Printing" in the Operating Instructions). To set the printer driver in Macintosh, see "Setting the Installable Options" on page 93 or "Setting the Installed Options" on page 112 of "Settings and Printing" in the - Panasonic KX-P7305 | Laser Printer - Page 130
is recommended. The frequency of cleaning is dependent upon the environment in which the printer is used. You should clean the printer: • at least once a month. • when you replace the toner cartridge. • when print quality has deteriorated. CAUTION • Do not use benzene, thinner, aerosol cleaners, or - Panasonic KX-P7305 | Laser Printer - Page 131
wipe it with a soft cloth that has been moistened with a mild commercial cleaner. 4 Open the front cover. Pick up roller 5 Lift the drum unit up (1) and slide it out of the printer (2). •To avoid possible toner spillage, it is recommended to place the drum unit on a newspaper or drop cloth. 1 1 2 - Panasonic KX-P7305 | Laser Printer - Page 132
Printing Maintenance and Spec. Network 10 Cleaning the Printer ! SAFETY CAUTION •It is very hot inside the printer; to avoid personal injury, do not touch the components illustrated below. CAUTION: HOT SURFACE CAUTION • To prevent any damage to the drum unit, observe the following precautions - Panasonic KX-P7305 | Laser Printer - Page 133
7 Turn the sponge up and carefully wipe the laser unit cover glass with a dry lint-free cloth. Laser unit cover glass: Not to touch by hand CAUTION To avoid a damage to the printer, • Do not use rubbing alcohol to wipe the laser unit cover glass. • Do not touch the laser unit cover glass by hand. - Panasonic KX-P7305 | Laser Printer - Page 134
wipe the corona wire of the drum unit by sliding a dry cotton swab from end to end a few times. corona wire 9 Firmly insert the drum unit in the slot of the printer (1) [insert the side pins of the drum unit into the groove (label )]. Push down (2). 2 1 Side pin 2 10 Close the front cover and - Panasonic KX-P7305 | Laser Printer - Page 135
" on page 53). • Make sure that you load thick paper [106 - 165 g/m2 (29 - 44 lb.)] or labels only in the manual feed. If a media jam occurs, the printer status display reports "Jam at ". The are the various sensors throughout the paper path as illustrated below. Jam at A (see - Panasonic KX-P7305 | Laser Printer - Page 136
and Printing Maintenance and Spec. Jam at STD / Jam at OP Network 14 Clearing a Jam When a media feed error has occurred, clear the media feed error as follows: 1 Pull the media tray out of the printer or 2nd feeder (option). 2 Tap the media stack on a level surface to avoid media jams or skewed - Panasonic KX-P7305 | Laser Printer - Page 137
feeds in direction of arrow. NOTE • If the metal plate is in the up position by accident, the media tray cannot be inserted into the printer. Before loading the media, push down the metal plate until it clicks, locking it in place. 4 Replace the media tray into the - Panasonic KX-P7305 | Laser Printer - Page 138
Settings and Printing Maintenance and Spec. Network 16 Clearing a Jam 5 Open and close the front cover to clear the error indication. 2 1 - Panasonic KX-P7305 | Laser Printer - Page 139
Settings and Printing Maintenance and Spec. Jam at A 1 Open the front cover. Network 17 Clearing a Jam 2 Lift the drum unit up. - Panasonic KX-P7305 | Laser Printer - Page 140
Settings and Printing Maintenance and Spec. Network 18 Clearing a Jam 3 Grasp both sides of the jammed media and slowly pull it out of the printer. 4 Push the drum unit down. 5 Close the front cover. - Panasonic KX-P7305 | Laser Printer - Page 141
Settings and Printing Maintenance and Spec. Jam at B 1 Open the front cover. Network 19 Clearing a Jam 2 Lift the drum unit up. - Panasonic KX-P7305 | Laser Printer - Page 142
Settings and Printing Maintenance and Spec. Network 3 Remove the jammed media from the output tray. 20 Clearing a Jam - Or - Open the rear cover of the printer (1) and remove the jammed media (2). 2 1 CAUTION HOT SURFACE - Panasonic KX-P7305 | Laser Printer - Page 143
Settings and Printing Maintenance and Spec. 4 Push the drum unit down. Network 21 Clearing a Jam 5 Close the front cover. - Panasonic KX-P7305 | Laser Printer - Page 144
. Jam at C Network 22 Clearing a Jam 1 Perform the jam recovery steps for Jam at A (see page 17). - Or - 1 Pull the media tray out of the printer. 2 Slowly pull the jammed media (2) out of the printer while pushing the center tab (1) of the jam release pan down. 1 Rear side of - Panasonic KX-P7305 | Laser Printer - Page 145
Settings and Printing Maintenance and Spec. 3 Replace the media tray into the printer. Network 23 Clearing a Jam 4 Open and close the front cover to clear the error indication. 2 1 - Panasonic KX-P7305 | Laser Printer - Page 146
Settings and Printing Maintenance and Spec. Jam at D Network 24 Clearing a Jam 1 Open the rear cover of the printer (1) and grasp both sides of the jammed media and slowly pull it out of the printer (2). 2 1 CAUTION HOT SURFACE 2 Open and close the front cover to clear the error indication. 2 1 - Panasonic KX-P7305 | Laser Printer - Page 147
. Jam at E Network 25 Clearing a Jam 1 Perform the jam recovery steps for Jam at D (see page 24). - Or - 1 Pull the media tray out of the printer. 2 Slowly pull the jammed media (2) out of the printer while pushing the center tab (1) of the jam release pan down. 1 Rear side of - Panasonic KX-P7305 | Laser Printer - Page 148
Settings and Printing Maintenance and Spec. 3 Replace the media tray into the printer. Network 26 Clearing a Jam 4 Open and close the front cover to clear the error indication. 2 1 - Panasonic KX-P7305 | Laser Printer - Page 149
and Spec. Troubleshooting Network 27 Troubleshooting Trouble Possible Cause The background of the images is printed in gray. ABCD The toner cartridge has reached the end of useful life. The drum unit has reached the end of useful life. Incorrect type of media is used. Your printer is in - Panasonic KX-P7305 | Laser Printer - Page 150
refer to "Cleaning the Photosensitive Drum" on page 37). The drum unit is damaged. Replace the drum unit. The corona wire in the drum unit is dirty. Clean the corona wire in the drum unit (see "Cleaning the Printer" on page 8). The entire page prints in The drum unit is damaged. black. Replace - Panasonic KX-P7305 | Laser Printer - Page 151
Spec. Trouble Possible Cause Network 29 Troubleshooting Corrective Action A white or black spots appear in intervals of 94 mm (3.7″). 94 mm (3.7″) Paste/Glue of a label or dust is attached to the photosensitive drum. Wipe the photosensitive drum (see "Cleaning the Photosensitive Drum" on - Panasonic KX-P7305 | Laser Printer - Page 152
Cleaning the Printer" on page 8). Replace the toner cartridge. Replace the drum unit. Display the Remote Control Panel and select Fuser Cleaning from the Tool menu to print a cleaning data (see "Remote Control Panel" on page 28 in "Settings and Printing"). If it is not recovered, call for service to - Panasonic KX-P7305 | Laser Printer - Page 153
Trouble A white vertical line appears on the page. ABCD Maintenance and Spec. Possible Cause The laser unit cover is dirty. A small matter is mixed with the roller of the toner cartridge. Network 31 Troubleshooting Corrective Action Clean the laser unit cover (see "Cleaning the Printer guides - Panasonic KX-P7305 | Laser Printer - Page 154
Settings and Printing Maintenance and Spec. Trouble Possible Cause Network 32 Troubleshooting Corrective Action The back of the printed page appears dirty. Frequent media-picking errors occur. The transfer roller or fuser unit is contaminated after clearing a jam. Display the Remote Control - Panasonic KX-P7305 | Laser Printer - Page 155
. ■ If you can't make a print Network 33 Troubleshooting Trouble Possible Corrective Action Printer not operating. The printer may not be plugged into an AC outlet or turned on. The interface cable(s) may not be connected properly. The printer driver is not set correctly. Make sure that you - Panasonic KX-P7305 | Laser Printer - Page 156
Settings and Printing Maintenance and Spec. Trouble Possible Network 34 Troubleshooting Corrective Action RAM Overflow occurs. Overrun error occurs. Printer's memory is insufficient in high resolution setting. The printer cannot manage printing because the complex images are in the document. - Panasonic KX-P7305 | Laser Printer - Page 157
Settings and Printing Maintenance and Spec. Trouble Possible Network 35 Troubleshooting Corrective Action The Web Administrative Tool does not work correctly after installing it in Windows Server™ 2003*1. As IIS security setting is added to Windows Server 2003, CGI application cannot run on - Panasonic KX-P7305 | Laser Printer - Page 158
out. ■ If you cannot install the printer driver in Microsoft® Windows NT® operating system Version 4.0 The printer driver cannot be installed with Add Printer Wizard in Windows NT 4.0. Install the printer driver with Setup.exe [see "Installing the Printer Software (For Windows)" in the Setup Guide]. - Panasonic KX-P7305 | Laser Printer - Page 159
is attached to the photosensitive drum of the drum unit, clean it following the steps below. 1 Open the front cover of the printer. 2 Lift the drum unit up (1) and slide it out of the printer (2). 1 1 2 3 While pushing the drum unit as illustrated below (1), lift the toner cartridge up (2). 2 1 - Panasonic KX-P7305 | Laser Printer - Page 160
Settings and Printing Maintenance and Spec. Network 4 Remove the toner cartridge from the drum unit. 38 Troubleshooting 5 If a paste/glue of a label is attached, find the portion that it is attached while rotating the gear of the photosensitive drum in the direction of the arrow. •The paste will - Panasonic KX-P7305 | Laser Printer - Page 161
swab. 39 Troubleshooting Dust Dust CAUTION • Do not use a sharp-pointed something like a ball-point pen to prevent the damage to the drum unit when removing the paste. 7 Insert the side pins of the toner cartridge into the slots of the drum unit (1). Push the toner cartridge in the drum unit - Panasonic KX-P7305 | Laser Printer - Page 162
Settings and Printing Maintenance and Spec. Network 40 Troubleshooting 8 Firmly insert the drum unit in the slot of the printer (1) [insert the side pins of the drum unit into the groove (label )]. Push down (2). 2 1 Side pin 2 9 Close the front cover. - Panasonic KX-P7305 | Laser Printer - Page 163
Settings and Printing Maintenance and Spec. Network 41 Troubleshooting Cleaning the Dust Scraper 1 Open the front cover of the printer. 2 Lift the drum unit up (1) and slide it out of the printer (2). 1 1 2 3 Open the cover of the dust scraper. 4 Clean the inside with the vacum cleaner, then - Panasonic KX-P7305 | Laser Printer - Page 164
Settings and Printing Maintenance and Spec. Network 42 Troubleshooting 5 Firmly insert the drum unit in the slot of the printer (1) [insert the side pins of the drum unit into the groove (label )]. Push down (2). 2 1 Side pin 2 6 Close the front cover. - Panasonic KX-P7305 | Laser Printer - Page 165
ERROR Drum unit is not installed. Toner is empty. Drum unit is worn out. Internal error has occurred. Install the drum unit. Replace the toner cartridge now. Replace the drum unit now. Turn the power off for a few seconds then on again. If the error continues, call for service. TONER/ DRUM UNIT - Panasonic KX-P7305 | Laser Printer - Page 166
these instructions. SAFETY CAUTION The printer weighs about 10 kg {22 lbs.}. NOTE • Should you need to send your printer for service, consult your reseller first or Panasonic. • Please use the original carton and all of the original packing materials. • Do not ship printer with drum unit installed - Panasonic KX-P7305 | Laser Printer - Page 167
Settings and Printing Maintenance and Spec. Network 45 Repacking Instructions 3 Lift the drum unit up (1) and slide it out of the printer (2). •To avoid possible toner spillage, it is recommended to place the drum unit on a newspaper, drop cloth or best to place back in original (Black) shipping - Panasonic KX-P7305 | Laser Printer - Page 168
Settings and Printing Maintenance and Spec. Network 46 Repacking Instructions 4 While pushing the drum unit as illustrated below (1), lift the toner cartridge up (2). 2 1 5 Replace the shipping cover on the toner cartridge. - Panasonic KX-P7305 | Laser Printer - Page 169
Maintenance and Spec. Network 47 Repacking Instructions 6 Insert the toner cartridge into a plastic bag and certainly seal the end of the bag tightly. 3 2 1 7 Wrap the drum unit with the protective sheet to protect the drum surface. 8 Insert the drum unit into a plastic bag and seal the - Panasonic KX-P7305 | Laser Printer - Page 170
around the printer. NOTE • If a toner vacuum is available, it is the best tool for cleaning spilled toner. Do not use a standard office vacuum; the toner will not be retained by typical vacuum dust collectors. 11 Repack the printer. Printer CD-ROM Setup Guide Toner cartridge Power cord Drum unit - Panasonic KX-P7305 | Laser Printer - Page 171
Spec. Specifications Network 49 Specifications Printer Printing Method: Semiconductor Laser Print Speed: 18 ppm ( unit Memory: 16 MB Emulation: PCL 6 Emulation*1, PostScript® 2 Emulation*1 *1The available fonts or print may differ from the genuine software because they are not genuine software - Panasonic KX-P7305 | Laser Printer - Page 172
- KX-P7310 only Warm Up Time 15 seconds [at 22°C (71.6°F), 50% RH] Operating Environment: 10 to 10″) Mass {Weight}: Approx. 10 kg {22 lbs.} Consumables / Life: Starter toner cartridge (provided with printer); 2,000 pages average*1 Toner cartridge; 5,000 pages average*1 (6,000 pages maximum) Drum unit - Panasonic KX-P7305 | Laser Printer - Page 173
. See "Remote Control Panel" on page 28 in "Windows" of "Settings and Printing". NOTE • All printer's resident fonts have also been included in the printer CD-ROM. For information on how to install these fonts on your computer, see the Setup Guide. ■ TrueType Font for PCL The following 45 fonts can - Panasonic KX-P7305 | Laser Printer - Page 174
Settings and Printing Maintenance and Spec. Network 52 Specifications ■ Fonts for PostScript The following 35 fonts can be available. • Dutch 801 SWA, Dutch 801 Bold SWA, Dutch 801 Italic SWA, Dutch 801 Bold Italic SWA • Swiss 721 SWA, Swiss 721 Bold SWA, Swiss 721 Oblique SWA, Swiss 721 Bold - Panasonic KX-P7305 | Laser Printer - Page 175
and Spec. Media Network 53 Specifications ■ Paper Specifications This printer is designed to work well with most types of paper. However sharp blades, no paper dust Ash Content: Not to exceed 10% Curl: No allowable curl toward the side to be printed Packing: Polylaminated moisture proof ream wrap - Panasonic KX-P7305 | Laser Printer - Page 176
the manufacturer. ■ Paper and Envelope Sizes The following paper and envelope sizes are supported by the printer. Medium Paper Envelope*1 Name Letter A4 Legal B5 Executive A5*1 A6*1 Envelope #9 Envelope #10 International DL International C5 Monarch Dimension 216 x 279 mm (8.5″ x 11″) 210 x 297 - Panasonic KX-P7305 | Laser Printer - Page 177
media (paper, transparency, etc.) (It may transfer onto the fuser unit's roller and cause damage.) ■ Transparencies and Labels You may also print on labels and transparencies that are made for the printer. Panasonic has tested and found that the following work satisfactorily. OHP transparencies - Panasonic KX-P7305 | Laser Printer - Page 178
Settings and Printing Maintenance and Spec. Network 56 Specifications NOTE • With any label stock, the labels must completely cover the backing material (see figure below). YES NO Labels cover the entire backing material ■ Envelope Specifications The backing material is exposed. It is - Panasonic KX-P7305 | Laser Printer - Page 179
• Self-adhesive envelopes • Envelopes that are baggy or not sharply creased • Embossed envelopes • Envelopes that have previously been printed with a laser printer • Envelopes that have been previously printed inside Curl Twist Dog-ears Wave Bent-edge Side seam construction Peel-off strip - Panasonic KX-P7305 | Laser Printer - Page 180
may cause damage to your printer. • Envelopes with clasps, snaps or tie strings (see Figure 1) • Envelopes with transparent windows (see Figure 2) • 70%. High humidity may cause the envelope to curl and pick up excess toner. High humidity may also cause the envelope to seal. • Envelope storage is - Panasonic KX-P7305 | Laser Printer - Page 181
Data 1 3 Data 2 4 Data 3 5 Data 4 6 Data 5 7 Data 6 8 Data 7 9 Data 8 10 nAck 11 Busy 12 PError 13 Select 14 nAutoFd 15 NC 16 GND 17 FG 18 Peripheral Logic High Pin Signal 35 NC 36 nSelectIn Parallel (IEEE1284) Interface connector (printer side) 18 1 36 19 - Panasonic KX-P7305 | Laser Printer - Page 182
. Network 60 Specifications CAUTION • If the cable is connected to PC via printer buffer or selector, the printer may not print. • A print server cannot be used for printing. NOTE • Be sure to use only a shielded cable. The printer will not operate properly if any of the pins are not connected. - Panasonic KX-P7305 | Laser Printer - Page 183
high- / full-speed shielded cable (12 Mbps or 480 Mbps) which the Data + and Data - cables are the twisted pair. • When using the printer and other USB devices simultaneously, we cannot guarantee normal printing. • Be sure to use a High-Speed USB 2.0 certified cable if your computer is equipped with - Panasonic KX-P7305 | Laser Printer - Page 184
1 Features 2 Setup in Windows 3 Selecting the Printing Method 4 Contents of the Printer Software 5 LPR Port Printing using TCP/IP in Windows 7 LPR Port Printing - a Configuration Page 82 Resetting the Printer Settings to Factory Default 83 Troubleshooting 84 Configuration Parameters 89 - Panasonic KX-P7305 | Laser Printer - Page 185
as a network printer. The KX-P7310 network function has the following features: Supports 100Base-TX and 10Base-T Supports the following network operating systems • Windows® 95*1 / Windows 98*2 / Windows Me*3 / Windows NT® 4.0*4 / Windows 2000*5, Windows XP*6 / Windows Server™ 2003*7 • NetWare - Panasonic KX-P7305 | Laser Printer - Page 186
Windows*1 (Windows 95, Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP and Windows Server 2003 environment). When installing the KX-P7310 software, refer to "Contents of the Printer Software a computer" on page 4). Custom Printer Setup Supports setting up printing through a shared - Panasonic KX-P7305 | Laser Printer - Page 187
and Printing Maintenance and Spec. Network 4 Setup in Windows Selecting the Printing Method There are two methods of server (the shared computer), then it is transferred from the print server to the printer. This method is recommended for larger networks because it lets the print server manage - Panasonic KX-P7305 | Laser Printer - Page 188
driver and manual, the following utilities and manual are installed. See "Windows" section of "Settings and Printing" in the Operating Instructions how to use each software utility. (1) PCL 6 printer driver (2) PostScript printer driver (3) Status Display Displays the printer's condition or an error - Panasonic KX-P7305 | Laser Printer - Page 189
Windows ■ Web Administrative Tool Manages the printer by showing the status of the device connected to the network and can change configurations. This allowes an administrator to manage a printer the following folder by default: C (System Drive):\Program Files\Panasonic\Web Administrative Tool - Panasonic KX-P7305 | Laser Printer - Page 190
TCP/IP on the printer Step 3: Setting up the printer driver and the printer port on the server computer Step 4: Setting up the client computer CAUTION • To set up printing with the above method [B], File and Print Sharing... service should be installed in Windows 95, Windows 98, Windows Me. If the - Panasonic KX-P7305 | Laser Printer - Page 191
install the TCP/IP protocol as it is not installed by default in Windows 95. If the administrator manages the IP Address, contact him/her to or documentation for Windows. Step 2: Setting up TCP/IP on the printer You need to set the IP Address, Subnet Mask and Default Gateway for the printer. It can - Panasonic KX-P7305 | Laser Printer - Page 192
Windows [A] Using the DHCP server If the administrator manages the network with DHCP server, it will automatically assign an IP Address, Subnet Mask and Default Gateway. These can be viewed by printing out the configuration page. It can be printed by pressing the PRINT/RESET button on the printer - Panasonic KX-P7305 | Laser Printer - Page 193
and Spec. Network 10 Setup in Windows If the Network Setup Tool is already installed, click [Start] , move the pointer to Programs or All Programs, Panasonic and Panasonic KX-P7305 and KX-P7310, then click Network Setup Tool. Proceed to the step 6. 1 Insert the printer CD-ROM disk into - Panasonic KX-P7305 | Laser Printer - Page 194
and Spec. Network 11 Setup in Windows 4 Follow the instructions until the screen below is displayed. 5 Click on the Yes check button, and then [Finish]. The list of KX-7310 printers residing on the network is displayed. • If you want to search printers in the network again, click the - Panasonic KX-P7305 | Laser Printer - Page 195
. Network 12 Setup in Windows 6 Click the KX-P7310 printer you want to set up in the list. Then click the Setup menu and select Network Setup.... NOTE • When several printers are listed in the Network Setup Tool window, select the printer using the Ethernet address (MAC address). You can obtain - Panasonic KX-P7305 | Laser Printer - Page 196
13 Setup in Windows 8 Remove the check of the Use DHCP/BOOTP and Use LARP check box, then enter IP address, Subnet Mask and Default Gateway. Click [OK]. 9 Confirm the setting and click [OK]. You will see the message "Update is completed. Do you wish to reset the printer?". 10 Click [Yes]. - Panasonic KX-P7305 | Laser Printer - Page 197
Windows 95 / Windows 98 / Windows Me) Or Command Prompt. (for Windows NT 4.0) Or Accessories - Command Prompt. (for Windows 2000 / Windows XP / Windows Server 2003) (2) At the DOS prompt, type ping followed by a space then the printer message or other error messages you should recheck your settings. - Panasonic KX-P7305 | Laser Printer - Page 198
, perform the following steps. (1) Double click My computer icon (Windows XP / Windows Server 2003: Start - My Computer). (2) Double click the CD-ROM icon. 2 (Click language and) click KX-P7310. 3 Click Install Printer driver and Utilities. The License Agreement window is displayed. 4 Click [Yes]. - Panasonic KX-P7305 | Laser Printer - Page 199
Settings and Printing Maintenance and Spec. Network 16 Setup in Windows 5 Click on the Custom Printer Setup check button and click [Next >]. The Select Setup type window is displayed. 6 Click on the Direct Print PC check button and click [Next >]. - Panasonic KX-P7305 | Laser Printer - Page 200
and Spec. Network 17 Setup in Windows 7 Click on the Select the Network port for KX-P7310 check button and click the printer you want to use, then click [Next >]. The Select installed options window is displayed. 8 Select the installed options in your printer. Click [Next >]. The Select the - Panasonic KX-P7305 | Laser Printer - Page 201
the Device, Device Settings or Device Options tab and manually configure the driver. 9 Click on the desired check button for the default printer and click [Next >]. 10 Click [Yes] or [No]. Yes:The easy installer that enables printing to the same printer is created in the shared folder (Inst7305 by - Panasonic KX-P7305 | Laser Printer - Page 202
Settings and Printing Maintenance and Spec. Network 19 Setup in Windows NOTE • If another computers are set up using the shared folder through the network, share the shared folder (Inst7305 by default) created by selecting [Yes] at step 10 (see "[A] Using the shared folder on the other computer" - Panasonic KX-P7305 | Laser Printer - Page 203
C:\Inst7305) on a CD-R media. 2 Insert the CD-R to another computer. The License Agreement window is displayed. 3 Click [Yes]. The setup program starts installing the printer driver and utilities. InstallShiled Wizard Complete window is displayed after the installation is finished. 4 Click [Finish]. - Panasonic KX-P7305 | Laser Printer - Page 204
Spec. Network 21 Setup in Windows LPR Port Printing - Printing through the shared computer (print server) Step 1: Setting up TCP/IP on the computer (see page 8) Step 2: Setting up TCP/IP on the printer (see page 8) Step 3: Setting up the printer driver and the printer port on the computer The - Panasonic KX-P7305 | Laser Printer - Page 205
Settings and Printing Maintenance and Spec. 3 Click Install Printer driver and Utilities. The License Agreement window is displayed. Network 22 Setup in Windows 4 Click [Yes]. 5 Click on the Custom Printer Setup check button and click [Next >]. The Select Setup type window is displayed. - Panasonic KX-P7305 | Laser Printer - Page 206
Printing Maintenance and Spec. Network 23 Setup in Windows 6 Click on the Printer Server PC check button and click [Next >]. 7 Select the printer in the Select the current port or Select the Network port for KX-P7310 list, then click [Next >]. The Select installed options window is displayed. - Panasonic KX-P7305 | Laser Printer - Page 207
and Spec. Network 24 Setup in Windows 8 Select the installed options in your printer. Click [Next >]. The Select the default printer window is displayed. NOTE • The installed options are automatically configured in the PCL printer driver if selecting the printer on the network at the previous - Panasonic KX-P7305 | Laser Printer - Page 208
Settings and Printing Maintenance and Spec. Network 25 Setup in Windows 10 Confirm the shared printer name and change it if needed. Click [Next >]. - Panasonic KX-P7305 | Laser Printer - Page 209
on page 27. No: A shared folder is not created. To setup a client computer, the printer CD-ROM disk is required. NOTE • If you want to change the Destination Folder to install, click [Browse...]. Then follow the instructions on the screen to change the destination folder. 12 (Click [Yes] and) click - Panasonic KX-P7305 | Laser Printer - Page 210
) on a CD-R media. 2 Insert the CD-R to a client computer to set up. The License Agreement window is displayed. 3 Click [Yes]. The setup program starts installing the printer driver and utilities. InstallShiled Wizard Complete window is displayed after the installation is finished. 4 Click [Finish]. - Panasonic KX-P7305 | Laser Printer - Page 211
, perform the following steps. (1) Double click My computer icon (Windows XP / Windows Server 2003: Start - My Computer). (2) Double click the CD-ROM icon. 2 (Click language and) click KX-P7310. 3 Click Install Printer driver and Utilities. The License Agreement window is displayed. 4 Click [Yes]. - Panasonic KX-P7305 | Laser Printer - Page 212
Settings and Printing Maintenance and Spec. Network 29 Setup in Windows 5 Click on the Custom Printer Setup check button and click [Next >]. The Select Setup the PC type window is displayed. 6 Click on the Client PC check button and click [Next >]. - Panasonic KX-P7305 | Laser Printer - Page 213
Printing Maintenance and Spec. Network 30 Setup in Windows 7 Enter the network path of the shared printer (\\server name\printer name) in the Specify the network path of the PCL printer and Specify the network path of the PostScript printer box, then click [Next >]. The Select installed options - Panasonic KX-P7305 | Laser Printer - Page 214
and Spec. Network 31 Setup in Windows 8 Select the installed options in your printer. Click [Next >]. The Select the default printer window is displayed. NOTE • The installed options are automatically configured in the PCL printer driver if selecting the printer on the network at the previous - Panasonic KX-P7305 | Laser Printer - Page 215
Step 3: Installing the printer driver and utilities 1 Insert the printer CD-ROM disk into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps. (1) Double click My computer icon (Windows XP / Windows Server 2003: Start - Panasonic KX-P7305 | Laser Printer - Page 216
Settings and Printing Maintenance and Spec. 3 Click Install Printer driver and Utilities. The License Agreement window is displayed. Network 33 Setup in Windows 4 Click [Yes]. 5 Click on the Custom Printer Setup check button and click [Next >]. - Panasonic KX-P7305 | Laser Printer - Page 217
the Direct Print PC check button and click [Next >]. 7 Select the printer in the Select the current port or Select the Network port for KX-P7310 list, then click [Next >]. The Select installed options window is displayed. • If the printer is not listed, select LPT1: to install the printer driver. - Panasonic KX-P7305 | Laser Printer - Page 218
and Spec. Network 35 Setup in Windows 8 Select the installed options in your printer. Click [Next >]. The Select the default printer window is displayed. NOTE • The installed options are automatically configured in the PCL printer driver if selecting the printer on the network at the previous - Panasonic KX-P7305 | Laser Printer - Page 219
steps for Windows 95 / Windows 98 / Windows Me. For Windows NT 4.0 / Windows 2000 / Windows XP / Windows Server 2003, see page 38. [For Windows 95 / Windows 98 / Windows Me] 1 Click [Start], move the pointer to Settings, then click Printers. 2 Click the Panasonic KX-P7310 PCL6 or Panasonic KX-P7310 - Panasonic KX-P7305 | Laser Printer - Page 220
window is not displayed. Proceed to step 9. 9 Click either the Do not print using a proxy server or the Print using a proxy server check button. Click [Next >]. • If you select Print using proxy server, enter the IP Address and port number of the proxy server. 10 Enter the URL of the printer - Panasonic KX-P7305 | Laser Printer - Page 221
2003, click [Start], then click or double click Printers and Faxes. • For Windows XP Home, click [Start], click Control Panel, click Printers and Other Hardware icon, then click Printers and Faxes icon. 2 Click the Panasonic KX-P7310 PCL6 or Panasonic KX-P7310 PS icon. 3 Click the File menu and - Panasonic KX-P7305 | Laser Printer - Page 222
window is not displayed. Proceed to step 9. 9 Click either the Do not print using a proxy server or the Print using a proxy server check button. Click [Next >]. • If you select Print using proxy server, enter the IP Address and port number of the proxy server. 10 Enter the URL of the printer - Panasonic KX-P7305 | Laser Printer - Page 223
Settings and Printing Maintenance and Spec. Network 40 Setup in Windows HP JetDirect Port Printing using TCP/IP or IPX/SPX in Windows This enables you to use the HP JetDirect port printing using the HP JetAdmin software. TCP/IP or IPX/SPX protocol is used for printing. - Panasonic KX-P7305 | Laser Printer - Page 224
in Macintosh KX-P7310 Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP on your computer and printer. The printer does not work with AppleTalk Phase1. Step 1: Setting up AppleTalk and TCP/IP on your computer [For Mac OS 8.5 - Mac OS 9.2] See page 42 for Mac OS X 10.1 - Mac OS X 10 - Panasonic KX-P7305 | Laser Printer - Page 225
Settings and Printing Maintenance and Spec. Network 42 Setup in Macintosh [For Mac OS X 10.1 - Mac OS X 10.2] 1 Click System Preference... from the Apple menu and click Network icon. The Network window is displayed. 2 Select Built-in Ethernet from Show menu. 3 Click the TCP/IP tab. 4 Assign the - Panasonic KX-P7305 | Laser Printer - Page 226
printer You need to set the IP Address, Subnet Mask and Default Gateway for the printer setup the printer using printer panel more than 2 seconds and less than 5 seconds. NOTE • If the printer receives the IP Address with unlimited lease term, the printer keeps the address permanently. The printer - Panasonic KX-P7305 | Laser Printer - Page 227
the Mac OS and English folder. 2 Double click the Network Setup Tool Installer icon. 3 Click [Continue] if you agree with the software license agreement. 4 Click [Install]. 5 Click [Quit]. 6 Double click Network Setup Tool (it is located in Panasonic:KX-P7305 and KX-P7310 folder). KX-P7310 printers - Panasonic KX-P7305 | Laser Printer - Page 228
KX-P7310 printer you want to set up, click Setup menu and then select Network Setup.... NOTE • When several printers are listed, select the printer using the MAC printer, you must enter the password and click [OK]. If a password is not entered, you can still see the printer to the printer, proceed to - Panasonic KX-P7305 | Laser Printer - Page 229
in Macintosh 10 Click [OK]. 11 Click Setup menu and click Restart the printer. 12 Click [OK] to restart the printer. 13 Click the printer assigned , click [OK] to exit the setting window. 17 Click [OK] to send the setting to the printer. The confirmation window is displayed. 18 Click [OK]. 19 Click - Panasonic KX-P7305 | Laser Printer - Page 230
/ NetWare 6 Perform the following steps: Step 1: Setting up the printer and server Step 2: Setting up the client Step 1: Setting up the printer and server There are four ways of setup. • [A] Using NDS (Novell Directory Service) - PSERVER mode • [B] Using NDS - RPRINTER (NPRINTER) mode (see page - Panasonic KX-P7305 | Laser Printer - Page 231
Panasonic KX-P7305 and KX-P7310, then click Network Setup Tool. Proceed to step 7. 3 Insert the printer CD-ROM disk into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps. (1) Double click My computer icon (Windows XP - Panasonic KX-P7305 | Laser Printer - Page 232
set up from the list. Then click the Setup menu and select Network Setup.... NOTE • When several printers are listed in the Network Setup Tool window, select the printer using the MAC address. You can obtain the number (hexadecimal six digits) from the label near the network interface connector or - Panasonic KX-P7305 | Laser Printer - Page 233
can change the Print Server Name and Printer Name. After changing, click [OK]. Then go back to the step 8. 10 Click on the PSERVER Mode check button. printer you want to configure in the Network Setup Tool window. 14 Click the Setup menu and select Create NetWare Queue. 15 Follow the instructions - Panasonic KX-P7305 | Laser Printer - Page 234
Settings and Printing Maintenance and Spec. Network 51 Setup in NetWare 16 Expand the Tree and select the context where the Queue will be added, and click [Next >]. 17 Click on the Print Server Mode check button and click [Next >]. - Panasonic KX-P7305 | Laser Printer - Page 235
jobs are temporarily stored on the selected volume; if there is different volumes required select it from the list, then click [Next >]. 19 Follow the instructions on the screen. NOTE • When the setting is finished, the printer is automatically restarted. - Panasonic KX-P7305 | Laser Printer - Page 236
Panasonic KX-P7305 and KX-P7310, then click Network Setup Tool. Proceed to step 7. 3 Insert the printer CD-ROM disk into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps. (1) Double click My computer icon (Windows XP - Panasonic KX-P7305 | Laser Printer - Page 237
set up from the list. Then click the Setup menu and select Network Setup.... NOTE • When several printers are listed in the Network Setup Tool window, select the printer using the MAC address. You can obtain the number (hexadecimal six digits) from the label near the network interface connector or - Panasonic KX-P7305 | Laser Printer - Page 238
Settings and Printing Maintenance and Spec. 9 Click the NetWare tab. Network 55 Setup in NetWare NOTE • You can change the Print Server Name and Printer Name. After changing, click [OK]. Then go back to the step 8. - Panasonic KX-P7305 | Laser Printer - Page 239
restarted. The following are the steps to set up the server. 13 Select the printer you want to configure from the list. Click the Setup menu and select Create NetWare Queue. 14 Follow the instructions on the screen. • When asked to select NDS or Bindery mode, select NDS Mode and click [Next - Panasonic KX-P7305 | Laser Printer - Page 240
Settings and Printing Maintenance and Spec. Network 57 Setup in NetWare 15 Expand the Tree and select the context where the Queue will be added, and click [Next >]. 16 Click on the Remote Printer Mode check button and click [Next >]. - Panasonic KX-P7305 | Laser Printer - Page 241
or enter the print server name you want to use for printing. Click [Next >]. NOTE • If the print server is on the NetWare server, the printer server can be selected from the list. 18 Change the queue name if needed. Click [Next >]. - Panasonic KX-P7305 | Laser Printer - Page 242
Settings and Printing Maintenance and Spec. Network 59 Setup in NetWare 19 Follow the instructions on the screen. 20 On the NetWare server type LOAD PSERVER xxxxxxxx, then press the Enter key. (xxxxxxxx : print server name). 21 Turn the printer off and on before printing. - Panasonic KX-P7305 | Laser Printer - Page 243
Remote printer (RPRINTER) mode Before setting up, select a printing mode. For detailed information on these modes, refer to the NetWare manual supervisor privilege. Novell Client software must be installed in your computer prior to setting up. Step 1: Setting up the printer When printing in Print - Panasonic KX-P7305 | Laser Printer - Page 244
Step 2: Setting up the Server [A] Using Print Server (PSERVER) mode 1 Select the printer you want to configure in the Network Setup Tool window. 2 Click the Setup menu and select Create NetWare Queue. 3 Follow the instructions on the screen. • When asked to select NDS mode or Bindery mode, select - Panasonic KX-P7305 | Laser Printer - Page 245
Setup in NetWare 5 Click on the Print Server Mode check button and click [Next >]. 6 Change the queue name if needed, then click [Next >]. 7 Follow the instructions on the screen. NOTE • When the setting is finished, the printer is automatically restarted. - Panasonic KX-P7305 | Laser Printer - Page 246
and Spec. Network 63 Setup in NetWare [B] Using the Remote Printer (RPRINTER) mode 1 Select the printer you want to configure in the Network Setup Tool window. 2 Click the Setup menu and select Create NetWare Queue. 3 Follow the instructions on the screen. • When asked to select NDS or Bindery - Panasonic KX-P7305 | Laser Printer - Page 247
Settings and Printing Maintenance and Spec. Network 64 Setup in NetWare 5 Click on the Remote Printer Mode check button and click [Next >]. 6 Select the print server name in the list or enter the print server name you want to use for - Panasonic KX-P7305 | Laser Printer - Page 248
server name). 10 Turn the printer off and on before printing. Step 3: Setting up the client See "[C] Using the printer CD-ROM" on page 28 in "Step 4: Setting up the client computer". NOTE • If using the Novell Client Software in Windows NT 4.0 / Windows 2000 / Windows XP / Windows Server 2003, add - Panasonic KX-P7305 | Laser Printer - Page 249
3x - 2.5x • HP-UX 9.x and 10.x • AIX 4.x.x • BSD UNIX There are two ways of printing. • Printing using LPD • Printing using FTP Printing using LPD LPD (Line Printer Daemon) is a network printing protocol and programs associated with printer spooling service installed on TCP/IP systems. Perform the - Panasonic KX-P7305 | Laser Printer - Page 250
" and the host name is "kxp7310". 172.16.xxx.xxx kxp7310 # KX-P7310 Printer 3 Confirm the connection to the network by using ping command. # ping kxp7310 Step 3: Setting up print queues Set up a print queue to use the network printer depending on your system environment. [For Solaris 2.6] 1 Create - Panasonic KX-P7305 | Laser Printer - Page 251
Settings and Printing Maintenance and Spec. Network 68 Setup in UNIX 2 Print • Print using "lp" command. For details, refer to the Solaris manual. # lp -d kxp7310lp - Panasonic KX-P7305 | Laser Printer - Page 252
queue. Example: Add print queue name "kxp7310lp" # /usr/sbin/lpadmin -p kxp7310lp -s kxp7310!lp If you use csh, use "\!". "lp" after "!" is the printer queue name. (5) Start print scheduler. # /usr/bin/sh /etc/init.d/lp start (6) Enable print queue. # /usr/sbin/accept kxp7310lp # /usr/bin/enable - Panasonic KX-P7305 | Laser Printer - Page 253
and Printing Maintenance and Spec. Network [For HP-UX 9.x and 10.x] 1 Set up remote spooler. (1) Log in as root. # login root (2) Disable printer spooler. # /usr/lib/lpshut (3) Add the following line to the /etc/inetd.conf. printer stream tcp nowait root /usr/lib/rlpdaemon -i (4) Restart inetd - Panasonic KX-P7305 | Laser Printer - Page 254
-s lpd' 2 Add print queue with smit command. (1) Perform smit. Move to "Add Print Queues". # smit mkrque (2) From the list, select "remote" (printer connected to remote host). (3) From the list, select "Standard processing from the list". (4) Setup the following item at "Add a Standard Remote - Panasonic KX-P7305 | Laser Printer - Page 255
Enter host name added to /etc/hosts file. rp : printer name of remote printer. Enter "lp" in this case. sd : spool directory. lf : error log file. For more information, refer to your UNIX manual. (3) Create and set up the spool directory and error log file. # mkdir /usr/spool/kxp7310lp # touch /usr - Panasonic KX-P7305 | Laser Printer - Page 256
Protocol) is a protocol for transferring files installed on TCP/IP systems. Perform the following steps. 1 Log on the printer. # ftp PANA (or ftp 172.16.xxx.xxx) Connected to PANA. 220 KX-P7310 Network Ver xxxx FTP server. User(PANA:root): root 331 Password required. Password: 230 User Logged in - Panasonic KX-P7305 | Laser Printer - Page 257
Web Server screen correctly. Displaying the Printer's Web Server Screen from Network Setup Tool (Windows only) 1 Display the Network Setup Tool (Start - Programs or All Programs - Panasonic - Panasonic KX-P7305 and KX-P7310 - Network Setup Tool). 2 Click the KX-P7310 printer you want to set up from - Panasonic KX-P7305 | Laser Printer - Page 258
Web Server Displaying the Printer's Web Server Screen from a Browser 1 Open the browser (Internet Explorer or Netscape). 2 Enter the printer's IP Address in the Address box and press the Enter key. The printer's Web Server screen is displayed. (Example) http://172.16.xxx.xxx/ (screen in Windows) - Panasonic KX-P7305 | Laser Printer - Page 259
Maintenance and Spec. Network 76 Using the Printer's Web Server Changing the Printer's Settings To change the printer's setting, 1 Display the Web Server screen (see page 74, 75). 2 Click Network Setup in the left pane. The Enter Network Password window is displayed. 3 Type root in the User - Panasonic KX-P7305 | Laser Printer - Page 260
so only the network administrator can change the configuration. To set the password, proceed to the following steps. 1 Perform step 1 - 3 of "Changing the Printer's Settings" on page 76. 2 Click General in the right pane. 3 Enter the password in the Value box (Max. 7 characters) and click [Submit - Panasonic KX-P7305 | Laser Printer - Page 261
the printer CD- Windows 95, Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2003 Mac OS 8.5, 8.6, 9.0, 9.1, 9.2 / Mac OS X 10.1, 10.2 • If the Web Administrative Tool does not work correctly after installing it in Windows Server 2003, refer to the troubleshooting - Panasonic KX-P7305 | Laser Printer - Page 262
/pademu/) in the Address box and press the Enter key. The Web Administrative Tool screen is displayed. Or 1 Click [Start], select Programs or All Programs, Panasonic and Web Administrative Tool, then click Web Administrative Tool. The Web Administrative Tool screen is displayed. - Panasonic KX-P7305 | Laser Printer - Page 263
Settings and Printing Maintenance and Spec. Network 80 Using the Web Administrative Tool ■ On the client computer 1 Open the browser (Internet Explorer or Netscape). 2 Enter the URL [http://(the address of the server)/pademu/] in the Address box and press the Enter key. The Web Administrative - Panasonic KX-P7305 | Laser Printer - Page 264
password. 3 Click Setup menu and click Network Setup.... • If a password is already set in the printer, you must enter the password and click [OK]. 4 Click General tab (Windows) or General icon (Mac) and click [Change root password...]. 5 Enter the same password in the New password box and Confirm - Panasonic KX-P7305 | Laser Printer - Page 265
82 Appendix 8 Click [OK] to send the setting to the printer. 9 Windows: Click [Yes] to restart the printer. Or Mac: Click [OK], then click Setup menu, click Restart the printer and click [OK]. NOTE • The printer's password of the printer's Web Server is same as that of the Network Setup Tool - Panasonic KX-P7305 | Laser Printer - Page 266
the Network Setup Tool. • To display the Network Setup Tool window, refer to "[B] Using the Network Setup Tool" on page 9 for Windows or "[B] Using the Network Setup Tool (Mac OS 8.5 - Mac OS 9.2)" on page 44 for Macintosh. 2 Click the printer you want to set up in the list. 3 Click the Setup - Panasonic KX-P7305 | Laser Printer - Page 267
Trouble in Windows Environment (NetBEUI) • Trouble in NetWare Environment • Trouble in Macintosh Environment (see below) (see page 85) (see page 85) (see page 86) (see page 87) ■ How to Diagnose Problems Use the following list to determine the cause of printing problems: 1 Verify that the printer - Panasonic KX-P7305 | Laser Printer - Page 268
if performing the Standard TCP/IP Port printing in Windows 2000, Windows XP or Windows Server 2003. ■ Trouble in Windows Environment (NetBEUI) Unable to find "MLP-Printer" in the Workgroup or "Entire Network". • Check that the KX-P7310 printer is connected to the network correctly. • Check network - Panasonic KX-P7305 | Laser Printer - Page 269
Settings and Printing Maintenance and Spec. Network 86 Appendix ■ Trouble in NetWare Environment Unable to search KX-P7310 using Network Setup Tool. • Check that the printer is connected to the network correctly. • In the Option menu bar in Network Setup Tool, make sure Use NetWare Protocol is - Panasonic KX-P7305 | Laser Printer - Page 270
87 Appendix ■ Trouble in Macintosh Environment Unable to detect KX-P7310. • Check that the KX-P7310 is connected to the network correctly. • If the KX-P7310 is on the assigned zone, make sure the zone name is selected from "Chooser" . • Make sure the correct printer driver is loaded. • Ensure - Panasonic KX-P7305 | Laser Printer - Page 271
NT 4.0, Windows 2000, Windows XP or Windows Server 2003. You have no authority to print. You are not registered in the server. You cannot install the printer software. The server computer is turned off. The server computer is disconnected from the network. Network problems occur. Corrective Action - Panasonic KX-P7305 | Laser Printer - Page 272
Settings and Printing Maintenance and Spec. Network Configuration Parameters • General • TCP/IP • NetWare • AppleTalk • SMB • SNMP • Printer Port (see below) (see page 90) (see page 91) (see page 92) (see page 92) (see page 93) (see page 94) 89 Appendix ■ General Name - Panasonic KX-P7305 | Laser Printer - Page 273
disables TCP/IP protocol. Enables or disables DHCP/BOOTP. When enabled, KX-P7310 gets an IP Address from the DHCP/BOOTP server while booting. which the KXP7310 is installed. Subnet mask for the network in which the KX-P7310 is installed. IP Address of the default gateway through which systems on - Panasonic KX-P7305 | Laser Printer - Page 274
Print Server Name Time Out Factory Default ENABLE 802.2 MLPxxxxxx-Printer PSERVER MLPxxxxxx NULL 4 seconds ENABLE NULL NULL NULL NULL 10 seconds Description Enables or disables NetWare printing. Sets default Frame type used by KX-P7310. If KX-P7310 does not work with the frame type, it will - Panasonic KX-P7305 | Laser Printer - Page 275
Function Factory Default ENABLE ENABLE MLPxxxxxx MLP-Printer NULL ENABLE Description Enables or disables NetBEUI protocol. Enables or disables NetBIOS protocol. Sets Computer name. This name is shown as the computer in Windows Explorer. Sets the workgroup the KX-P7310 belongs to. This comment is - Panasonic KX-P7305 | Laser Printer - Page 276
name is authenticated when receiving SNMP Set Request. Enables or disables authentic TRAP. Enters TRAP community name. This name will be used when the printer executes a TRAP. Enters the TRAP address. The TRAP address is disabled if the IP Address is set 0.0.0.0. Enters SysContact for MB-II object - Panasonic KX-P7305 | Laser Printer - Page 277
of the printing job to the output port via Kanji filter (sjis, euc). Sets printer emulation (PDL). Changes to appropriate code when printing via Kanji filter (sjis, euc). is set to "0" or when the job is directly sent to the printer. Sets the number of characters for the auto line feed feature of the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
 |
 |
This section contains information on cautions, parts identification, loading media
and printing and printer setup (Windows & Mac).
This section contains information on cleaning the printer, replacing supplies,
clearing jams, troubleshooting, error messages, repacking and specifications of
the printer, media to be used and interface.
This section contains the information to configure the printer on a network.
Settings and Printing (Print.pdf)
Maintenance and Specifications (Mainte.pdf)
Network (Network.pdf)
Laser Printer
Operating Instructions
Model No.
KX-P7305 / KX-P7310
KX-P7305 is supplied without a network interface.
KX-P7310 comes standard with a USB, Parallel,
and Network interfaces. The Operating Instructions consist of the following 3 files.
• Print.pdf
• Mainte.pdf
• Network.pdf
These files can be opened by clicking on the hilighted names below. The printer’s setup, operation,
and features are described on the following pages of this file.
Please carefully read the Operating Instructions before operating.
Keep the printer CD-ROM in a safe place for future reference.
Do not expose the CD-ROM to direct sunlight or extreme heat and do not scratch or smudge the
surface of the CD-ROM.