Panasonic KX-TA82483 Programming Guide - Page 51

2.2 PT Programming-Procedures Feature Manual References 1.1.41 Direct Inward System Access (DISA) 1.1.68 Intercept Routing [509] DISA Ring Time after Intercept Selects the length of time to ring the destination extension when a DISA call is redirected to the intercept destination after the time specified in [508] DISA Ring Time before Intercept expires. When the destination extension does not answer the call within the preprogrammed time period, the call is disconnected. 509 NEXT SELECT STORE END (10/ 20/30/ 40/60/120 s) Programming Manual References [507] DISA Intercept Mode [508] DISA Ring Time before Intercept Feature Manual References 1.1.41 Direct Inward System Access (DISA) 1.1.68 Intercept Routing [510] DISA No Dial Mode Selects how DISA calls are handled when the PBX does not receive either DTMF (Dual Tone MultiFrequency) signals or a fax (CNG) tone within a preprogrammed time period. 510 NEXT SELECT STORE END ( Intercept/ Disconnect) Feature Manual References 1.1.41 Direct Inward System Access (DISA) [511] DISA Security Mode Selects the DISA security mode to prevent unauthorized access to the PBX. In Trunk or All security mode, the caller is required to enter a DISA security code. 511 NEXT SELECT STORE END ( Trunk/All/ None Security) Notes Trunk Security: Requires the caller to enter a DISA security code assigned in [512] DISA Security Code before making an outside (CO) line call. All Security: Requires the caller to enter a DISA security code before making either an outside (CO) line or intercom call. No Security: Allows the caller to make either an outside (CO) line or intercom call without entering a DISA security code. Programming Manual 51