Panasonic KX-TG2226BV 2.4 Ghz Digital - Page 45

Remote Operation from a Touch Tone Phone You can operate the Answering System from any touch tone phone. A synthesized voice menu will guide you through the Answering System (p. 46). • To skip the voice menu and operate the unit directly, see page 47. Summary of remote operation Call your unit from a touch tone phone. Enter your remote code (see below) during or after the greeting message. • The number of new messages is heard. Answering System >>> > > > After 3 seconds, the voice menu will start (p. 46). Follow the menu or enter the direct commands (p. 47). To end remote operation, hang up. • The unit will announce the remaining recording time after playback, if it is less than 3 minutes. • The messages are saved. Remote Code Handset The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00-99) for your remote code. The factory preset remote code is "11". If you do not program your own remote code, you can use "11". 1 Press [MENU]. Initial setting 2 Scroll to "Initial setting" by pressing [ ] or [ ], then press Select. Exit Select >> > >>> Set answering 3 Scroll to "Set answering" by pressing [ ] or [ ], then press Select. Back Select 4 Scroll to "Remote code" by pressing [ ] or [ ], then press Select. Remote code Back Select 5 Enter a 2-digit remote code (00-99). Remote code :11 Back Save 6 Press Save, then press [OFF]. To check the remote code, repeat steps 1 to 4. • The remote code is displayed. When finished, press [OFF]. For assistance, please call: 1-800-211-PANA(7262) 45