Panasonic KX-TG2382B 2.4 Ghz Cordles Phon - Page 64

If the Following Appear... If the unit detects a problem, one of the following messages will be displayed on the handset. Error beeps or a busy tone will sound. Display message Recharge Charge for 15h No link to base Move closer to base, try again Busy Error!! Cause & Remedy The battery needs to be charged. Recharge the battery (p. 10, 11). The battery has been discharged. The handset will not work. Charge the battery fully (p. 10, 11). The handset has lost communication with the base unit. Move closer to the base unit, and try again. • The called handset/base unit is in use. • The handset you are calling is too far from the base unit. • If the radio communication between the handset and the base unit is partially impaired, this display will be shown. • If more than one unit is in use, such as conducting an external/internal call or listening to messages, you may not be able to use another unit. Try again later. • If the Answering System is responding to a call or another user is listening to messages in the Answering System, you cannot access the Answering System. Try again later. • You cannot join the conference call. A maximum of 2 handsets can take part in a conference call. • While 2 other handsets are making a conference call, you cannot operate the handset. Try again later. When you tried to register or deregister the handset, the handset and the base unit could not link for some reason, such as interference from other electrical appliances. Take the handset and the base unit away from the electrical appliances and try again. 64