Panasonic KX-TG2382B 2.4 Ghz Cordles Phon - Page 67

Problem The unit does not display the caller's name and/or phone number. The handset display exits the Caller List. You cannot page the handset or base unit. You cannot redial by pressing (PAUSE/REDIAL) on the handset. You cannot have a conversation or listening to messages using the headset. Cause & Remedy •You need to subscribe to a Caller ID service. •Other telephone equipment may be interfering with your phone. Disconnect it and try again. •Other electrical appliances connected to the same outlet may be interfering with the Caller ID information. •Telephone line noise may be affecting the Caller ID information. •The caller requested not to send his/her information. See page 30. •If a call is being transferred to you, the caller information will not be displayed. •Do not pause for over 60 seconds while searching. •The called handset is too far from the base unit. •The called unit is in use. Try again later. •If more than one other user is using the handsets and base unit, you may not be able to page. Try again later. • While 2 other handsets are making a conference call, you cannot page the handset or the base unit. Try again later. •If the last number dialed was more than 32 digits long, the number will not be redialed correctly. •The button has a double function as either redial or pause. It will redial the last number dialed if pressed at the outset of a call (p. 27). If another number has been dialed first, it will operate as a pause button (p. 47). •Make sure that an optional headset is connected properly (p. 12). •If "SP-phone" is displayed on the handset, press to switch to the headset. Useful Information For assistance, please call: 1-800-211-PANA(7262) 67