Panasonic KX-TG6053S Expandable Digital Cordless Phone - Page 45

Charge for 7h, Charging, SP-phone, Battery recharge, Making/answering calls, intercom, Problem

Page 45 highlights

Useful Information Battery recharge Problem I fully charged the battery, but 7 continues to flash, or 8 is displayed. The handset display is blank. While charging, the charge indicator does not light and "Charge for 7h" is displayed. Cause/solution L Clean the charge contacts and charge again (page 11). L The battery may need to be replaced with a new one (page 10). L Confirm that the battery is properly installed. L Fully charge the battery (page 10). L The battery is empty. The charge indicator does not light in order to concentrate on charging. After about 5 minutes, the charge indicator lights and "Charging" is displayed. Making/answering calls, intercom Problem Static is heard, sound cuts in and out. Interference from other electrical units. The handset does not ring. The base unit does not ring.*1 I cannot make a call. I cannot have a conversation using the headset. I cannot make long distance calls. I cannot page the handset. I cannot page the base unit.*1 Cause/solution L Move the handset and base unit away from other electrical appliances. L Move closer to the base unit. L Turn on the clarity booster feature (page 17). L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The ringer volume is turned off. Adjust it (page 27). L The ringer volume is turned off. Adjust it (page 16). L The dialing mode may be set incorrectly. Change the setting (page 14). L Another handset is in use. Try again later. L Make sure that an optional headset is connected properly (page 41). L If "SP-phone" is displayed on the handset, press {C} to switch to the headset. L Make sure that you have long distance service. L The called handset is too far from the base unit. L The called handset is in use. Try again later. L The base unit is in use. Try again later. For assistance, please visit http://www.panasonic.com/help 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Useful Information
For assistance, please visit http://www.panasonic.com/help
45
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
I fully charged the battery,
but
7
continues to flash,
or
8
is displayed.
L
Clean the charge contacts and charge again
(page 11).
L
The battery may need to be replaced with a new
one (page 10).
The handset display is
blank.
L
Confirm that the battery is properly installed.
L
Fully charge the battery (page 10).
While charging, the charge
indicator does not light and
Charge for 7h
” is
displayed.
L
The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and “
Charging
” is displayed.
Problem
Cause/solution
Static is heard, sound cuts
in and out. Interference
from other electrical units.
L
Move the handset and base unit away from
other electrical appliances.
L
Move closer to the base unit.
L
Turn on the clarity booster feature (page 17).
L
If your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
The handset does not ring.
L
The ringer volume is turned off. Adjust it (page
27).
The base unit does not
ring.
*1
L
The ringer volume is turned off. Adjust it (page
16).
I cannot make a call.
L
The dialing mode may be set incorrectly.
Change the setting (page 14).
L
Another handset is in use. Try again later.
I cannot have a
conversation using the
headset.
L
Make sure that an optional headset is
connected properly (page 41).
L
If “
SP-phone
” is displayed on the handset,
press
{C}
to switch to the headset.
I cannot make long
distance calls.
L
Make sure that you have long distance service.
I cannot page the handset.
L
The called handset is too far from the base unit.
L
The called handset is in use. Try again later.
I cannot page the base
unit.
*1
L
The base unit is in use. Try again later.